Logitech Wireless Headset H600 User manual

Getting started with
Logitech® Wireless Headset H600

2
Logitech® Wireless Headset H600
Getting started with
Logitech® Wireless Headset H600

3
Logitech® Wireless Headset H600
English . . . . . . . . . . 5
Deutsch . . . . . . . . . 11
Français . . . . . . . . . 17
Italiano . . . . . . . . . 23
Español . . . . . . . . . 29
Português . . . . . . . . 35
Nederlands . . . . . . . 41
Svenska . . . . . . . . . 47
Dansk . . . . . . . . . . 53
Norsk . . . . . . . . . . 59
Suomi . . . . . . . . . . 65
Ελληνικά . . . . . . . . . 71
По-русски . . . . . . . . 77
Magyar . . . . . . . . . 83
Česká verze . . . . . . . 89
Po polsku . . . . . . . . 95
Eesti . . . . . . . . . . .101
Latviski . . . . . . . . .107
Lietuvių . . . . . . . . . 113
Hrvatski . . . . . . . . . 119
Srpski . . . . . . . . . .125
Slovenščina . . . . . . .131
Slovenčina . . . . . . .137
Română . . . . . . . . .143
Български. . . . . . . .149
Українська . . . . . . .155
Türkçe . . . . . . . . . .161
www.logitech.com/support . . . . . . . . . . . . . . . . . . . . . . . 175
Contents
172 . . . . . . . . . 

English 5
Logitech® Wireless Headset H600
2
1
3
45
12
11
9
10
6
7
8
Headset features
1. Noise-canceling microphone
2. Flexible, rotating microphone boom
3. Adjustable headband
4. Charging port
5. Status light
6. Nano receiver storage
7. Volume up
8. Volume down
9. Power switch
10. Microphone mute
11. USB wireless Nano receiver
12. USB charging cable

6English
Getting started with
2
3
1

English 7
Logitech® Wireless Headset H600
3

8English
Getting started with
4
Try the headset
Listen to music or make an Internet call to test
the wireless connection between the headset
and your audio source (laptop or smartphone).
If the headset doesn’t work with your computer,
you may need to make an adjustment in
your computer’s operation system so it will
recognize the headset, making the headset
the default audio input/output device.
Also refer to Help with setup for additional
troubleshooting advice.
Windows® XP
1. Go to Start/Control Panel/Sounds
and Audio devices/Audio tab.
2. In the Sound Playback/Default Device
window, choose the Logitech Wireless
Headset H600.
3. Select the Voice tab.
4. In the Voice tab, choose the Logitech
Wireless Headset H600.
5. Click OK.
6. Restart your media application.
Windows® Vista and Windows® 7
1. Go to Start/Control Panel/Sounds/
Playback Devices tab.
2. Choose Playback Devices.
3. Choose the Logitech Wireless Headset H600.
4. Click Set Default, and then click OK.
5. Select the Recording Tab.
6. Choose the Logitech Wireless Headset H600.
7. Click Set Default, and then click OK.
8. Restart your media application.
Mac® OS
1. Open System Preferences.
2. Choose the Sound/Output tab.
3. Choose the Logitech Wireless Headset H600.
4. Select the Input tab.
5. Choose the Logitech Wireless Headset H600.
6. Close window.
7. Restart your media application.

English 9
Logitech® Wireless Headset H600
Status light indicators
Color/behavior Meaning
Green More than 30 minutes of battery life left
Red (+ beeping) Less than 30 minutes of battery life left
Orange Charging
Steady Wireless connected and ready to use
Blinking Wireless not connected
Pulsing Headset is off and charging
Off Headset is off
Note: To charge the headset, plug the included USB charging cable into your headset and computer. When the headset battery
is very low, a full charge can take up to three hours. But you don’t have to stop using the headset because it charges while
you talk or listen to music.
Important: At product end of life, the battery is removable for disposal/recycling ONLY. Please see www.logitech.com/support
for more information.
Help with setup
Something not sound right? No sound at all? Not connecting?
•Try moving the headset closer to the USB wireless Nano receiver. The wireless connection
status light on the headset turns solid green when the headset is in range (up to 30ft/10m)
with the Nano receiver. See the wireless performance table below for Nano receiver
placement tips.
•Make sure the headset is the active output audio device in both your application
and operating system. For more information, see Test the Headset.
•Adjust the volume and microphone settings to an audible level in both your application
and operating system.
•Quit and restart your media application.
•If you’re using a USB hub (powered or un-powered), try plugging the Nano receiver directly
into your computer.
•Try using the headset with another computer.

10 English
Getting started with
Headset not charging?
•Use the provided USB charging cable. Connect the cable to the charging port on the headset,
and connect the other end of the cable to a USB port on your computer.
•If you are using a USB hub, connect the charging cable directly to a USB port on your computer.
Controls not working?
•Some functions of the headset may not be supported depending on the tablet, smartphone and/
or application.
Wireless performance
Not recommended Recommended
Back of desktop tower Front of desktop tower
Plugged into monitor or keyboard USB port Directly plugged into the PC
USB hub (powered or non-powered) Directly plugged into the PC
Right next to other receivers (laptop) Away from other receivers (laptop)
Within three feet of wireless router More than three feet away from a wireless router
For additional assistance, please visit www.logitech.com/support.