Logitech ZONE 900 User manual

LOGITECH ZONE 900
Setup Guide
Guide d’installation

CONTENTS
English . . . . . . . . . . . . . . . . .3
Français . . . . . . . . . . . . . . . 11
Español . . . . . . . . . . . . . . . . 19
Português . . . . . . . . . . . . . . 27

KNOW YOUR PRODUCT
Microphone boom
Power/Pairing light
indicator
Active Noise
Cancellation (ANC)
Power /Bluetooth®
pairing
USB port
for chargingcable
USB-C adapter
Light indicator
USB-A Unifying
+Audio receiver
Volume up
Volume down
Mute
Multi-function button Qi wireless
chargingarea
3English

USB-A USB-C ADAPTER USB-A | USB-C
Logi Zone
900
2 sec.
WHAT’S IN THE BOX
1. Headset
2. USB-A Unifying + audio receiver
3. USB-C to A adapter
4. USB-A to C charging cable
5. Travel bag
6. User documentation
POWER ON/OFF
1. Press power button for 1 second.
2. Once powered on, light indicator turns white.
Ifnodevice is connected, it will ash white slowly.
PAIRING VIA BLUETOOTH®
1. Press power button for 2 seconds. Light indicator
willash white rapidly.
2. Open Bluetooth®settings on your device.
3. Select Logi Zone 900 in discoverable devices.
4. Once successfully paired, light indicator will turn
solidwhite.
Power
4English

PAIRING HEADSET, KEYBOARD AND MICE VIA USB RECEIVER
1. Download Logitech®Unifying Software at www.logitech.com/support/unifying
2. USB-A
Insert the Zone 900 receiver into the computer USB-A port.
USB-C
Insert the USB-A receiver into the USB-C adapter. Then insert the adapter into the computer USB-C port.
3. Zone 900 headset is already paired to the receiver it ships with. Just power on the headset. Once successfully
paired, the light indicator on the receiver will remain solid white. Light indicator on the headset will turn solid white.
4. To pair mice and keyboard,
a. Open the software and continue clicking “Next” on the bottom right corner. Ifyoualready have other unifying
receivers (with logo), please unplug them.
b. Locate the OFF-ON slider on your mice and keyboard. Turn each device o and back onto restart your devices
and nish pairing.
- If paired, please follow the on-screen prompt and test it out to conrm successful pairing.
- If pairing failed, please retry or refer to troubleshooting on our support page
www.logitech.com/support/zone900
NOTE: you can pair up to 6 Logitech Unifying peripherals.
ADJUSTING HEADSET
1. Adjust headset by sliding earcups up and down
theheadband.
2. It may be easier to adjust the headset on your head.
Movethe earcups up and down the headband until
theysit comfortably on your ears.
ADJUSTING THE MICROPHONE BOOM
1. Microphone boom rotates 270 degrees. Wear it on either
left or right side. Audio channel will switchautomatically,
depending on the direction you are wearing
themicrophone.
2. Flexible microphone boom — adjust boom location
tocapture voice better.
OFF/ON
www.logitech.com/
support/unifying
Advanced Next
USB-A
USB-C
5English

“ANC on”
“ANC o”
ACTIVE NOISE CANCELLATION (ANC)
ANC blocks out the noise around you to help you
concentrate on the task at hand.
1. Press the ANC button on the side of the earcup.
2. There will be voice notications when turning ANC on
ando. These can be turned o in Logi Tune.
MUTE
Mute
Move mic boom
uptomute
Voice notications
indicatewhen
themicrophone is on/
omute
“Mute on”
“Mute o”
Move mic boom
downto unmute
Note:
- Media control functionality depends on type of application.
- Call activities are always the rst priority. When two devices are connected, the Bluetooth®
connection will be prioritized over receiver. When two Bluetooth®devices are connected, the last
active device will override the other.
Tip: Button customizations and Music EQ controls available on Logi Tune.
Usage Button Action
Call controls
Answer / End call
Multi-function
Short press
Reject call 2 second press
Voice assistant Multi-function 2 second press
Media controls
Play / Pause Multi-function Double press
Track forward Multi-function
and “+”Short press
Track backward Multi-function
and “–”Short press
Volume
Volume up “+”Short press
Volume down “–”Short press
Headset status Check connectivity
and battery life “+”and “–”Short press
HEADSET CONTROLS
6English

Powered on or fully charged
Battery charging
Low battery
Bluetooth®pairing mode
Bluetooth®pairing mode while
lowbattery
No paired device
No paired device while lowbattery
HEADSET LIGHT INDICATOR
Light Status
White
Solid Powered on or fully charged
Breathing Battery charging
Fast pulsing Bluetooth®pairing mode
Slow pulsing No paired device
Red
Solid Low battery
Fast pulsing Bluetooth®pairing mode while low battery
Slow pulsing No paired device while lowbattery
RECEIVER INDICATOR LIGHT
Light Status
White
Fast ashing Pairing mode
Solid Paired
Repeat ashing on
and o Incoming call
Red Solid Mute on
Pairing mode
Paired
Incoming call
Mute on
Note:
Receiver light indicates headset status only.
7English

Headset indicator light
LOGI TUNE APP
Install application
Download Logi Tune from www.logitech.com/tune
Charging via Qi wireless charger
1. Fold headset with the wireless charging icon
ontheearcupto the outside.
2. Place earcup with wireless charging icon on top
ofanyQiwireless charging base.*
3. Indicator light will be a breathing, white light
whencharging.
4. Indicator light will be solid white when fully charged.
–2hours of charging fully charges the battery.
* Qi wireless charging base is not included.
CHARGING
Headset automatically powers o when left idle. Sleeptimer can be changed in the Logi Tune.
Headset indicator light will turn RED when battery islow.
Charging via USB cable
1. Plug the USB-C cable end into the USB-C port
onthebottom of the earcup.
2. Plug the USB-A end into the USB-A charging port
onyourcomputer or AC adapter.
3. Indicator light will be a breathing white light
for charging.
4. Indicator light will be solid white when fully charged.
– 2hours will fully charge the battery.
– 5 minutes will give you 1 hour of talk time.
5. Headset can be used with receiver and Bluetooth®paired while charging.
8English

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during
conversationsso you are aware of how loud you are
talking. In Logi Tune, select the sidetone feature,
andadjust the dial accordingly.
- A higher number means you hear more external sound.
- A lower number means you hear less external sound.
AUTO SLEEP TIMER
By default, your headset will automatically power o
whennot in use for one hour. Adjust the sleep timer
inLogi Tune.
RESET YOUR HEADSET
To reset your headset back to its original state,
powerheadset on, press and hold the ANC button and
volume ’–’ button for 5 seconds. The headset is successfully
reset when it powers o and indicator light turns o.
UPDATE YOUR HEADSET
It is recommended to update both your headset
andreceiver. To do so, download Logi Tune from
www.logitech.com/tune
HEADSET:
Height x Width x Depth:
174.7 x 176.7 x 70.7 mm
WEIGHT:
0.1808 Kg
EARPADS:
Height x Width x Depth:
70.7 x 70.7 x 16.4 mm
RECEIVER:
Height x Width x Depth:
35.5 x 16.2 x 5.3 mm
ADAPTER:
Height x Width x Depth:
106.7 x 17.5 x 10.1 mm
DIMENSIONS
9English

© 2021 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech
Europe S.A. and/or its aliates in the U.S. and other countries. Logitech assumes noresponsibility
for any errors that may appear in this manual. Information contained herein issubject to change
without notice. The Bluetooth®word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Logitech is under license. All other trademarks
are the property of their respective owners.
Works with common calling applications across almost all
platforms and operating systems.
Works with Windows®, Mac, or Chrome™ based computer via
USB-C, USB-A, Bluetooth®and iOS or Android™ Bluetooth®
enabled devices.
Microphone Type: Omni-directional dual MEMS mic array
Frequency response (Headset): 30~13 kHz @ -10 dB (music mode),
100~8 kHz (talk mode)
Frequency response (Microphone): 85~20 kHz @-3 dB
Battery type: Built-in battery (Lithium ion)
Battery life (talk time): 14 hrs (ANC on), 15 hrs (ANC o)
Battery life (listening time): 14 hrs (ANC on), 16 hrs (ANC o)
Bluetooth®version: 5.0
Wireless range: Up to 30 m/100 ft (open eld line of sight)
Qi Wireless charging enabled
USB-A to C charging cable: 4.25 ft (130 cm)
SYSTEM REQUIREMENTS
TECHNICAL SPECIFICATIONS
www.logitech.com/support/zone900