Logitech ZONE 950 User manual

ZONE 950
Setup Guide
Guide d'installation

CONTENTS
English . . . . . . . . . . . . . . . . . 3
Français . . . . . . . . . . . . . . . . 14
Español. . . . . . . . . . . . . . . . .25
Português . . . . . . . . . . . . . . .36

KNOW YOUR PRODUCT
Adjustable headband
Light indicator
USB-C port for
charging cable
Power /
Bluetooth®pairing
USB-C receiver
Light indicator
USB-A adapter
Padded replaceable
earpads
Touch controls for
volume and music
Adjustable
noise-cancelling
microphone boom
Microphone mute
Active noise
cancellation (ANC)
&Transparency mode
Call button
3English

USB-C USB-A USB-C
USB-C
USB-A
WHAT’S IN THE BOX
1. Headset
2. USB-C receiver
3. USB-A adapter
4. USB-C to C charging cable
5. Travel bag
6. User documentation
POWER ON / OFF
1. Slide power switch to the center.
2. Once powered on, light indicator
turns white.
3. To power o, slide power switch
tothe power icon.
PAIRING VIA USB RECEIVER
1. USB-C
Insert the receiver into the computer
USB-C port.
USB-A
Insert the USB-C receiver into the
USB-A adapter. Then insert the
adapter into the computer USB-A port.
2. Headset is already paired to
thereceiver it ships with. Just power on
the headset. Once successfully paired,
the light indicator on the receiver will
remain solid white. Light indicator on
the headset will turn solid white.
3. Make sure "Zone 950" is selected on
the computer sound setting.
4English

2 sec.
ZONE 950
PAIRING VIA BLUETOOTH®
1. Slide power switch to the Bluetooth
icon and hold for 2 seconds.
Lightindicator will ash blue rapidly.
2. Open Bluetooth settings on
yourdevice.
3. Select "Zone 950" in discoverable
devices.
4. Once successfully paired, light
indicator will turn solid white.
Tip: When the headset is paired to the laptop,
ifneeded, go to the sound setting and select
“Zone 950 Stereo” for the best music quality
and select “Zone 950 Hands-Free” for calls.
ADJUSTING HEADSET
1. Adjust headset by sliding earcups
up and down the headband.
2. Swivel earcups to t on your ear.
3. It may be easier to adjust
theheadset on your head.
Move the earcups up and down
the headband until they sit
comfortably on your ears.
ADJUSTING THE MICROPHONE BOOM
Microphone boom rotates 270 degrees.
Wear it on either le or right side.
Audiochannel will switch automatically,
depending on the direction you are
wearing the microphone.
5English

USB-C USB-C
CHARGING
Headset automatically powers o
when le idle.
Sleep timer can be changed in
Logi Tune app.
Headset indicator light will turn
RED when battery is low.
Charging via USB cable
1. Plug the USB-C cable end into the
USB-C port on the bottom of the earcup.
2. Plug the USB-C end into the USB-C
charging port on your computer.
3. Indicator light will be a breathing
whitelight for charging.
Indicator light will be solid white
whenfully charged.
– 2 hours of charging fully charges
thebattery.
– 5 minutes will give you 1 hour
oftalktime.
4. Headset can be used with receiver
andBluetooth paired while charging.
Itcan also be used as a corded headset
with the USB-C cable connected while
the headset is powered o.
6English

HEADSET CONTROLS
Note:
- Media control functionality depends on the type of application.
- Call activities are always the rst priority over media streaming. When two devices are connected, the Bluetooth
connection will be prioritized over the receiver. When two Bluetooth devices are connected, the last active device will
take a priority over the other. And the priority between two Bluetooth devices can be customized on Logi Tune app
under Connected devices.
Button Usage Action
Call controls
Answer / End call Short press
Reject call 2 seconds press
Resume call Short press
ANC controls
Toggle between ANC and
Transparency Short press
ANC and Transparency o 2 seconds press
Media controls Play / Pause Double tap
Track forward Triple tap
Volume controls Volume up Swipe up
Volume down Swipe down
Headset status Check connectivity and
battery status Tap and hold for 2 seconds
Mute Mute on Short press
Mute o Short press
Voice assistance Trigger voice assistant 2 seconds press
(when mic boom is down)
Tip: ANC and touch controls can be customized on Logi Tune app.
7English

Mute
3. Simply take the headset o to mute and
put it back to unmute. To use this feature,
enable it on Logi Tune app.
MUTE
There are 3 ways to mute your microphone.
ACTIVE NOISE CANCELLATION ANC
ANC blocks out the noise around you to help you
concentrate on the task at hand.
— Press the ANC button on the side of
the earcup to toggle between ANC and
Transparency mode.
— There will be voice prompts when switching
between modes.
Note: ANC button can be customized to cycle through up
to 4 dierent modes on Logi Tune app.
1. Press the button
to mute.
2. Flip up or down the mic
boom to mute or unmute.*
Voice prompts indicate when the mic is mute on/o.
*Can be disabled on Logi Tune app
"ANC High"
"Transparency On"
"Mute on"
"Mute o"
8English

RECEIVER INDICATOR LIGHT
Connected / Ongoing call
Incoming call
Mute on
Pairing
HEADSET LIGHT INDICATOR
Light Status
White
Solid
Power on
Connected to a device
Battery fully charged
Pulsing Battery charging
Blinking Incoming call
Red Blinking Low battery
Solid Mute on
Blue Flashing Bluetooth pairing mode
Blue and White Blinking Headset rmware updating
Power on / Connected to a device /
Battery fully charged
Battery charging
Incoming call
Low battery
Mute On
Bluetooth pairing mode
Headset rmware updating
Light Status
White Solid Connected
Ongoing call
Repeat ashing on and o Incoming call
Red Solid Mute on
Blue Flashing Pairing
9English

USB-C USB-C
LOGI TUNE
Logi Tune helps boost your headset
performance with periodic soware and
rmware updates. Learn more and download
Logi Tune at logitech.com/tune, the Apple App
Store or Google Play store.
ONHEAD DETECTION
Sensors on the headset can detect if the headset
is worn or not and control the status. It can be
disabled or enabled on Logi Tune app.
Auto pause/resume
During media streaming, when the headset is taken
o, the media will pause. When the headset is put
on, the media will resume.
Answer incoming call
When there is an incoming call, put on the
headset to answer the call. To use this feature,
enable it on Logi Tune app.
Mic mute/unmute
During an ongoing call, when the headset
istaken o, the mic will be muted. When the
headset is put on, the mic will be unmuted.
Touse this feature, enable it on Logi Tune app.
Note: Functionality depends on the type of application.
Note: Headset would be charged during this mode.
Button controls may not be available in this mode.
AUDIO OVER USB DENSITYFRIENDLY
If your audio is unstable during a call because there
are too many wireless devices nearby (high density),
the headset can be used as a corded headset.
1. Turn o the headset.
2. Connect the headset to the USB cable provided.
And plug the other side of the USB-C cable into
the USB-C port on your computer.
3. Make sure "Zone 950" is selected on the audio
device setting.
Logi Tune
logitech.com/tune
10English

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during conversations
soyou are aware of how loud you are talking. In Logi Tune app,
select the sidetone feature, and adjust the dial accordingly.
 A higher number means you hear more external sound.
 A lower number means you hear less external sound.
AUTO SLEEP TIMER
By default, your headset will automatically power o when not
inuse for 1 hour. Adjust the sleep timer in Logi Tune app.
PERSONAL EQ
Create a personalized sound equalizer that is optimized for
yourhearing in Logi Tune Mobile app.
Through a simple listening test, our algorithm detects what you hear
and adjusts frequencies to best deliver the sound you've wanted.
ADVANCED CALL CLARITY
Reduces the ambient noise from the far end of a call to hear them
more clearly.
Enable it in Logi Tune app and select low or high mode depending
onthe noise loudness.
 WIth this feature enabled, you can enjoy up to 12 hrs (ANC on)
orup to 14 hrs (ANC o) of talk time.
HEARING PROTECTION
Zone 950 provides three types of protection to help you hear safely.
Peak limiting:
Audio volume is always limited at 100dBA to prevent hearing damages.
Anti-startle protection:
Once enabled it in Logi Tune app, it eliminates sudden audio
spikes to avoid acoustic shocks as per Australian G616 guideline.
This applies to call activities only.
Noise exposure over time:
Once enabled it in Logi Tune app, it protects your ears from the
noise exposure over an 8-hour period with a limit up to 85dBA as
per Australian G616 guideline. This applies to call activities only.
Note: This applies to music quality instead of call audio quality.
11English

UPDATE YOUR HEADSET
It is recommended to update both your headset and receiver.
To do so, download Logi Tune from logitech.com/tune
Note: Turn o and on the headset aer the update is completed to make
sure it is successfully done.
RECONNECT YOUR HEADSET
In case the headset is disconnected to the receiver, you can
reconnect your headset via Logi Tune.
1. Plug USB-C receiver or USB-A adapter with the USB-C receiver
into the computer USB port.
2. Power on the headset by sliding the power switch to the center.
3. Open Logi Tune Desktop on your computer.
4. Select "Zone Receiver" from the dashboard.
5. Wait while it is looking for the previously connected headset.
6. If no headset is shown as connected to the receiver,
click“Pairheadset”.
7. Enter pairing mode on the headset by sliding the power switch
to the Bluetooth icon and holding it for 2 seconds. Light
indicator will ash blue rapidly.
8. Once successfully paired, the light indicator on the receiver
andon the headset will turn solid white.
RESET YOUR HEADSET
To reset your headset back to its original state, power headset on,
hold the power button to the pairing mode and long press the
ANC button for 5 seconds. The headset is successfully reset when
the headset light indicator blinks fast in red and white 3 times and
turns o.
12English

Headset:
Height x Width x Depth: 183.9 x 179.1 x 70.0 mm
Weight:
0.23 kg
Receiver:
Height x Width x Depth: 26.6 x 12.4 x 6.5 mm
Adapter:
Height x Width x Depth: 24.5 x 15.4 x 8.7 mm
DIMENSIONS
Works with common calling applications across almost all platforms and
operating systems. Works with Windows, Mac, or Chrome-based computer via
USB-C, USB-A, Bluetooth and iOS or Android Bluetooth enabled devices.
SYSTEM REQUIREMENTS
TECHNICAL SPECIFICATIONS
© 2023 Logitech. Logitech, Logi, Zone, and their logos are trademarks or registered trademarks
of Logitech Europe S.A. and/or its aliates in the U.S. and other countries. Apple, the Apple logo,
iOS, and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a
service mark of Apple Inc. Android, Chrome, Google Play and the Google Play logo are trademarks
of Google LLC. The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Logitech is under license. Windows is a trademark of the
Microso group of companies. USB-C and all other 3rd party trademarks are the properties of
their respective owners. Logitech assumes no responsibility for any errors that may appear in this
manual. Information contained herein is subject to change without notice.
logitech.com/support/zone950
Microcrophone type: 5 omnidirectional MEMS
Frequency response (headset): 20~20 kHz (music mode), 100~8 kHz (talk mode)
Frequency response (microphone): 100~8 kHz
Battery type: Built-in battery (lithium ion)
Battery life (talk time): Up to 15 hrs (ANC on), up to 18 hrs (ANC o)
Battery life (listening time): Up to 22 hrs (ANC on), up to 40 hrs (ANC o)
Bluetooth version: 5.2
Wireless range*: Up to 50 m/170  (open eld line of sight)
USB-C to C charging cable: 1.5 m
Compliant to EN50332-2
* Wireless range may vary based on environmental and computing conditions.