Ltech WiFi-104 User manual

Model: WiFi-104
www.ltech-led.com

WiFi-104 Technical Parameters:
WiFi-104 LED Controller WiFi-104 LED Controller
Communication
Standard:
Input Voltage:
Output Current:
Max Output Power:
2.4GHz Wi-Fi, 802.11b/g/n
Protocol
12~24Vdc
4A×4CH Max 16A
192W/384W(12V/24V)
Max 100m
Dimming, CT, RGB, RGBW
Software Technical Parameters:
1. Product Parameter:
Control Distance:
Output Control:
Operating Temp.:
Dimensions:
Package Size:
Weight (G.W.):
3. Controller Operating Instructions:
Side A Side B
RUN:
LINK:
RX/TX:
The indicator light flashes quickly about 25s during the electric initialization. Flashes once per second
after initialization.
The indicator light stays lit when the mobile device connects to WiFi-104, and turns off when disconnect.
The indicator light turns on when WiFi-104 receives or transmits the WiFi data, turns off in the
free time.
3.2 Work Status Indicator Instructions:
3.1 Install/Uninstall ANT:
Clockwise to install the WiFi-104 ANT, counterclockwise to take off.
2. Configuration Diagram:
-30℃~55℃
L128×W73×H45(mm)
L135×W80×H64(mm)
390g Wireless Frequency:
Input Voltage:
Output Voltage:
Output Current:
Output Power:
Wireless Distance :
Working Temp.:
Dimension:
Package Size:
Weight (G.W.):
2.4GHz
12-48Vdc
3-46Vdc
CC 350/700/1050mA×4CH
1.05W~48.3W×4CH Max 193.2W
30m (to WiFi-104)
-30℃~55℃
L175×W44×H30(mm)
L178×W48×H33(mm)
165g
R4-CC Constant Current Zone Receiver
Wireless Frequency:
Input Voltage:
Max Current Load:
Max Output Power:
2.4GHz
5-24Vdc
5A×4CH Max 20A
R4-5A Constant Voltage Zone Receiver
30m (to WiFi-104)
-30℃~55℃
L175×W44×H30(mm)
L178×W48×H33(mm)
150g
Wireless Distance :
Working Temp.:
Dimensions:
Package Size:
Weight (G.W.):
100W/240W/480W(5V/12V/24V)
Platform:
Screen Resolution:
WiFi Function:
Byte:
Language:
Category:
Other:
Android 2.2 or above, IOS 5.1 or
above
Above 960 640×
Yes
Android Edition (919K);
iOS Edition (2.9MB)
English
Appliance
Free, No Plug-ins
2
1
WiFi-104 is a WiFi lighting control system, Controls various types of
LED lighting products by installing the related App on our iOS or Android mobile devices which support WiFi
connection.
consisted of APPs and WiFi controller.
With DIM, CT adjustment, RGB changing and RGBW changing 4 in 1 operation, plus 12 zones control function,
you can connect directly or by a router.
Note: Receiver is sold seperately

3.3 SSID Number Setting:
Use code switch to set the controller's SSID number, WIFI-104-SSID-X, X stands for a certain No. ranging
from 0-F, totally 16 options. which means our product could set 16 isolated LAN in the same area. WiFi-104
will initialize with run LED indicator flashing about 25s quickly, each time the SSID NO. is changed. Mobile
devices need to search and connect WiFi again after Initialization finished.
3.4 “Match” and “Scene” Button:
4. The Instructions of APP Software:
4.2.1 WiFi Connection and Settings
4.2 Software Operating Instructions:
[ Restore factory settings/Delete password ]
Short press MATCH button, WiFi controller begins its learning ID status for M12 remote (learning method, see
P13). Short press “SCENE” button entering into the user-saved scene modes sequentially, 4 scenes total.
Long press “MATCH” and “SCENE” button simultaneously more than 2 seconds, the machine will back to the
default parameter, including the parameters of changing modes, zone, group and network. Machine default
parameters: Only the 1st zone is present, default RGBW mode, the changing mode is RGB jumping, white
is the brightest, no groups, network SSID is wifi-104-SSID-X (X is the actual coding switch corresponding
SSID values), wifi-104 controller restores as direct connection and the connection password is blank.
4.1. WiFi-104 Software Installation:
Apple WiFi connectionAndroid WiFi connection
WiFi-104 support 2 connection modes: Direct connection as a router or connect by an additional router.
A. WiFi-104 Controller Direct Connection as a Router:
(Figure- )1
Enter mobile device's WiFi setting, click the WiFi function, mobile device search the WiFi and list the working
WiFi controller automatically(As Figure-1), click the SSID number to connect (default is no password).
Scene interface
Scene button and match button
34
WiFi-104 LED Controller WiFi-104 LED Controller
iOS/Android
Scan QR Code to download the APP via mobile phone.

Connect to the WiFi-104 controller, the step as (4.2.1)same
B. Connection with an Additional Router:
Connect WiFi-104 Controller to the Additional Router Network:
( -2-1)Figure
b.
a.
( -2-2)Figure
Connect an additional
router interface
Wifi-104 as
a router interface
Delete WiFi-104
controller list
Disconnect to
WiFi-104 controller
Network
Zone function
Change the background
Connect to the additional
router TP-LINK1
Connect to WiFi-104
Manual searching the WiFi-104
controller which connect to the
additional router
Workable WiFi-104
Click mobile device's icon to start the software, the software will search and list the working WiFi
controller automatically, and there is a blue wireless icon (as Figure-2-1)
Workable Zone NO.
Click “Network” key to enter Network interface(as Figure-3-1), start "connect to exiting LAN", software will
search the workable WiFi net SSID list, choose the specified router to connect (Attn: do not choose WiFi-
104 controller), can add the WiFi-104 controller to the wireless router (as figure-3-2 the wireless router
TP-LINK1)
c.
Repeat the abc steps If you need connecting multiple wifi-104 controllers to this wireless router
d. Exit WiFi-104 software, enter mobile device setting-wireless network setting, choose the wireless router
to connect. Device list interface shows as Figure 2-2 when re-opening the WiFi-104 software.
Now completes the steps to connect to the additional router.
( -3-1)Figure
Network interface
( -3-2)Figure
In this connection mode, to avoid the mobile device automatically connect to WiFi-104 after the setting
has completed, please click on the connected WiFi-104 which under the mobile device "WiFi setting". and
at the message box please click "Ignore the network," (apple iOS) or "cancel save" (SUMSUNG mobile
phone is "forget") to cancel the save of WiFi-104 connection.
Attn:
Android cancellation of the save of
Wifi-104 connection
Apple
Wifi-104 connection
cancellation of the save of
56
WiFi-104 LED Controller WiFi-104 LED Controller

78
4.2.2 Main Interface ( 5 types )
RGBW value
5 Main Interface
White
value
Brightness value
Color bar
Zone selection
Group interface Mode interface Scene interface
Main switch
Group selection
Device list interface
4.2.3 The Learning Method of Zone Control
A. Turn On Zones Control
[Attn]:
NO.1 if not connected.
Wifi-104 itself is defaulted as zone NO.1, connecting lights is optional, slave control will be zone
Zone
Return
Type
Turn on
Zone name
Zone number
Click “Zone” on the Device List interface, enter Zone set interface. turn on each zone, choose the
LED type accordingly (zones are nameable).
Turn off
Zone set interface
Device list interface
Select type interface
WiFi-104 LED Controller WiFi-104 LED Controller

Group interface Group operations in main interface
Group selection
Group name
Open the group
Zone selection
4.2.5 Mode Interface for RGB / RGBW Type Mode
Changing
mode
Play single
mode
Speed
slider
Mode interface
Brightness
slider
Long
press
Short
press
Cycle play multiple modes
(speed & brightness is
unadjustable )
Type selection
(jumping/flash/
smooth/fade)
Choose the mode
to circle play
1
2
3
B. Learning ID:
C. Cancelling ID:
Long press” ID learning button” on the receiver for 5s, the buzzer long beep, ID cancelled.
[Attn]: Reset function is available during ID cancellation. Considering dysfunction in rare cases, please cancel
the ID and re-sync.
ID learning button
The running light
Zone number
Color screen
Short press "ID learning button" on the receiver, the running light keeps on, select the zone No. on
the App and touch the color screen for 2s-3s. The buzzer long beep (meanwhile the running light on the
receiver back to flash state), ID matched.
4.2.4 Group
Group Features：
Group
Choose several zones as one group and control in sync.
Max 3 groups, same LED types in one group and one zone could join multiple groups.
Enable the group status, the corresponding group will appear on the main interface.
Group settings will be auto off if zone LED type on off state changed.&
910
WiFi-104 LED Controller WiFi-104 LED Controller

1.
Device list interface
2.
Network interface
3.SSID name
change interface
4.SSID password
change interface
[Attn]:
[Attn]:
Direct connection of using wifi-104 as a router, exit the App after the SSID name and the password
changed, reconnect the WiFi-104 on the mobile devices.
If forget the WiFi network password, press “MATCH” and “SCENE” button simultaneously above 2s to
restore the factory default settings and delete the WiFi network password (see P3)
[Restore factory settings/Delete password]
5. WiFi Network SSID Name and Password Setting
On device list interface, click “Network” key to enter Network interface, select “Change SSID and Password”
(Click” ” ) to enter User Setting interface. Type new SSID name and password ( Min. 8 characters, consist
of 0-9, a-z and A-Z). Click “Apply” button on the top right corner of the interface to save the changes.
4.2.6. DIY Interface
Mode
Edit DIY mode
DIY mode
Play single
DIY mode
Playback loop
several
DIY mode
DIY mode interface
Save
DIY
Color
box
Edit single DIY mode Edit single DIY mode
Long press
color box
to delete
current color
Scene
Back to the
main interface
Scene
background
Click to change
the scene
background
Play the
scenes
Play the scenes
Saving the current scene
Change the scene background Save scene interface
4.2.7 Scene Interface
For extra router connection, just press “ ” on Device List interface to research WiFi-104.
11 12
WiFi-104 LED Controller WiFi-104 LED Controller

13 14
7. Wiring Diagram
Attn]: [
7.1 Connection Between Zone Receiver to LEDs ( Same as WiFi-104 )
Turn on zones
Long press to save scene
applied for 12 zones
Turn off zones
Short press to turn off all zones
Short press to turn on all zones
Long press to turn on the key tone
Long press to turn off key tone
(long press to increase brightness
slowly under the mode of dimming or CT.)
(long press to decrease brightness
slowly under the mode of dimming or CT)
(excluding the zones being closed separatedly)
Remote Operating Instructions
6.
Short press ”MATCH” on WiFi-104, , press any key on M12, again,
ID matched.
the buzzer long beep the buzzer beep
Long press ”MATCH” on Wifi-104 above 6s, the buzzer long beep, ID cancelled
(cancelled all matched remotes).
Learning ID
Cancelling ID
M12 Remote
Working Voltage:
Transmitting Frequency:
Remote Distance:
Dimensions:
Weight (G.W):
3Vdc (CR2032 button battery)
2.4GHz
30m (to WiFi-104)
L104×W60×H9(mm)
42g
All zones could be used for same LED types or not. e.g. single color dimming in all zones, all set to
DIM type. Set different LED type in each zone accordingly (Dimming, CT or RGB, etc.).
Short press to recall scene
WiFi-104 LED Controller WiFi-104 LED Controller
Wifi-104 itself is defaulted as zone NO.1, connecting lights is optional, slave control will be zone NO.1,
if not connected.

7.3 Extra Router Connection
[Attn] unlimited zone receiver R4-5A/R4-CC can be installed for each zone within effective range.
7.2 Direct Connection of Using WiFi-104 as Router
15 16
WiFi-104 LED Controller WiFi-104 LED Controller

7.4 Remote Distance Reference
[Attn]:
17
9. Warranty Agreement
8.1 The product shall be installed and serviced by the qualified person.
8.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors, please
mounted in a water proof enclosure.
ensure it is
8.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
8.4 Please check if the output voltage of the LED power supply used comply with the working voltage of the
product.
8.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry
Please also ensure that the cable is secured tightly in the connector.
the current.
8.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages to the lights.
8.7 If a fault occurs, please return the product to your supplier. Do not attempt to fix this product by yourself.
9.1 We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement if
cover manufacturing faults only.
For faults beyond the 5-year warranty, we reserve the right to charge for time and parts.
9.2 Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
9.3 Repair or replacement as provided under this warranty is the exclusive remedy to the customer. We shall
not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
9.4 Any amendment or adjustment to this warranty must be approved in writing by our company only.
★ This manual only applies to this model. We reserve the right to make changes without prior notice.
8. Attention
Update time: 2016.07.22
18
The following distance figures is measured in spacious environment. Please refer to the actual test
distance before installation.
WiFi-104 LED Controller WiFi-104 LED Controller
www.ltech-led.com