Ltech T4 LED RGBW User manual

T4 RGBW ControllerLED
2 in 1Sync/Zone
DIY Sync/Zone
Scene 3×
Touch
2.4GHz
Charging
RGBW
8 Zones
Scene-mode
RGBW

T4
LED RGBW Controller
T4 is the 2.4GHz RF wireless sync/zone RGBW controller which adopts
4 global initiate technology. It has powerful function that general RF
remote control can’t realize, especially in wireless connection between
receivers to realize sync dynamic change effect. It is very convenient
in installation for users.
— 1 —
T4-CV T4-CC
1. Product Size:
LED RGBW Controller
Remote Remote Holder
Receiver
170mm
T4
55mm
145mm
22mm
27mm
60mm
86mm
65mm
175mm
44mm
30mm

— 2 —
Charging Voltage:
Working Current:
Working Frequency:
RF Remote Distance:
Remote Option:
Battery Capacity:
Package Size:
Weight (G.W.):
5Vdc(Built-in lithium battery)
<30mA
2.4GHz
30m
Sync/Zone/Programming Control
1000mAh
L168×W96×H34(mm)
210g
T4 Remote
2. Technical Specs:
T4-CV Receiver
Input Voltage:
Current Load:
Output Power:
Working Temp.:
Package Size:
Weight (G.W.):
Wireless Signal:
3. Notice for the Remote Charging:
C. No memory effect in the lithium battery of remote. Follow the standard charging procedure even for the first 3 times, no need over charge.
B. The blue indicator light flickers while charging, and turns green means the charging is completed. The remote can be chargeable even at off
state, which the indicator light is dark.
A. When charging, please connect USB cable to the mobile charger or computer.
D. Red indicator light flickers meaning low battery and need to be charged. Charging in low battery will affect the life of battery.
E. the remote should be full charged and stored at a ventilated and dry place when long time no use, and please full recharge every 3 months.
Max 100W/240W/480W(5V/12V/24V)
T4-CC Receiver
5～24Vdc
5A×4CH Max 20A
-30℃～55℃
L178×W48×H33(mm)
150g
2.4GHz
Input Voltage:
Output Voltage:
Current Load:
Output Power:
Wireless Signal:
Working Temp.:
Package Size:
Weight (G.W.):
12～48Vdc
3～46Vdc
CC 350/700/1050mA×4CH
1.05W～48.3W×4CH
-30℃～55℃
L178×W48×H33(mm)
165g
Max 193.2W
2.4GHz
LED RGBW Controller

LED CONTROLLER
T4-CC
RUN
RUN
LED CONTROLLER
T4-CV
OUT PUT
R G B W V+
5. Receiver Components Description:
ID Learning Button
ID Learning Button
Running Light
Running Light
Power Input Socket
Power Input Socket
Current Selection Switch
5~24Vdc
12~48Vdc
LED Lamp Connected Socket
LED Lamp Connected Socket
4. The Learning ID Method:
Learning ID:
Cancelling ID:
1. Turn on the receiver and remote.
Press “ID learning button” on the receiver more than 8 seconds, the buzzer beep twice, delete all the learned remote.
2. Short press "ID learning button" on the receiver, the running light keeps on, then long press “1-8" zone-selection keys on the remote, the
running light returns to flash (the buzzer long beep, the green light flashes 3 times), activated.
Sync Control: 1 remote to unlimited receivers. Zone Control: 1 remote to Max 8 receivers ( 1 receiver per zone ).
*
— 3 —
(Method of operation see below form)
LED RGBW Controller

6. Remote Instructions:
ress the key and simultaneously more than 2S. P
Built-in two control programs, it is convenient for user’s different habits and place, free switching the two programs.
Sync Control
Highlights
Mode Keys : Switch black/red/green/blue/yellow/purple/cyan/white/RGB/RBGYPCW.
*
Open the Buzzer: Long press . Close the Buzzer: Long press .
Unmanned operation more than 1 minute on the remote, the remote will off automatically to realize zero loss, extending
operation life. Press “ON/OFF” to restart the remote.
Power Saving:
— 4 —
Control Unlimited Receivers
Synchronously.
Programmable Function.
8 Save Keys.
ress the key and simultaneously more than 2S.P
Zone Control
Highlights
Zone Control Arbitrarily or
Sync Control.
Programmable Function.
LED RGBW Controller
PWPW

PW
A. Sync Program:
USB Charge Port
Touch Color Circle
Speed
Brightness
On/Off
Scene-save
Keys
Programming Key
White light Key
Mode
Switch Key for
Changing Modes
Sync Status
Indicator Light
W
P
The Usage of The Programming “P” :
(Jumping/Smooth )/Strobe
(Press to turn on/off the white LEDs.
Long press to adjust white LEDs)
Red
Red
Green Blue
Blue
Yellow Cyan White Black
BlackBlackBlackBlackBlackBlack
Purple
Example 1:
Example 2:
R G B Y P C W
R B
Red
Red
Green
Green
Blue
Blue
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Example 3:
Example 4:
R BK G BK B
R G B
BK R BK G BK B
Note: Select black color with keys .
3) Short press the key to exit color selection.
5) Long press any key from “1-8" to save the edited scene.
4) Press to switch the selected colors’ Jumping, smooth and strobe
(brightness/speed adjustment).
P
— 5 —
7 Colors’ Jumping/Smooth/Strobe
2 Colors’ Jumping/Smooth/Strobe
5 Colors’ Jumping/Smooth/Strobe
3 Colors’ Fade out and Fade in
6 Colors’ Jumping/Strobe
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6
7
7
7
7
8
8
8
8
1)
enter the programming mode.
Long press the key in 2 seconds, the buzzer long beep, means
P
2) Color selection: Short press a key from “1-8" in order, then press
“MODE” key or “touch color circle” to select the color. (color will be
saved in this key automatically, max 8 colors)
LED RGBW Controller

PW
B. Zone Program:
Zone-selection Keys
Zone ON/OFF Keys
Select single zone:
Press single key from “1-8".
USB Charge Port
Touch Color Circle
Speed
Brightness
On/Off
Programming Key
White light Key
Mode Keys
Switch Key for
Changing Modes
Sync Status
Indicator Light
W
P
(Jumping/Smooth )/Strobe
(Press to turn on/off the white LEDs.
Long press to adjust white LEDs)
— 6 —
Select multiple zones:
Open/Close the zone:
Press multiple keys from
“1-8" continuously.
Short press to open the zone,
Long press to close the zone. 5) OK, completed scene editing, press to play the scene.
The Usage of The Programming “P” :
1)
enter the programming mode.
Long press the key in 2 seconds, the buzzer long beep, means
P
Red
Red
Green Blue
Blue
Yellow Cyan White Black
BlackBlackBlackBlackBlackBlack
Purple
Example 1:
Example 2:
R G B Y P C W
R B
Red
Red
Green
Green
Blue
Blue
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Example 3:
Example 4:
R BK G BK B
R G B
BK R BK G BK B
Note: Select black color with keys .
3) Short press the key to exit color selection.
4) Press to switch the selected colors’ Jumping, smooth and strobe
(brightness/speed adjustment).
P
P
2) Color selection: Short press a key from “1-8" in order, then press
“MODE” key or “touch color circle” to select the color. (color will be
saved in this key automatically, max 8 colors)
7 Colors’ Jumping/Smooth/Strobe
2 Colors’ Jumping/Smooth/Strobe
5 Colors’ Jumping/Smooth/Strobe
3 Colors’ Fade out and Fade in
6 Colors’ Jumping/Strobe
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6
7
7
7
7
8
8
8
8
LED RGBW Controller

Red
Black
Green
Blue
Yellow
Purple
Cyan
White
Red, Green, Blue
Red, Green, Blue, Yellow,
Purple, Cyan, White
Static Red
Static Green
Static Blue
Static Yellow
Static Purple
Static Cyan
Static White
RGB Jumping
7 Colors Jumping
Red fade out and fade in
Green fade out and fade in
Blue fade out and fade in
Yellow fade out and fade in
Purple fade out and fade in
Cyan fade out and fade in
White fade out and fade in
RGB color smooth
Full-color smooth
Red strobe
Green strobe
Blue strobe
Yellow strobe
Purple strobe
Cyan strobe
White strobe
RGB strobe
7 colors strobe
1
2
3
4
5
6
7
8
9
10
Press button to switch the 3 types
No.
Color
Press Button
to Switch color Strobe
Jumping Smooth
7. Tables of Changing Mode:
— 7 —
LED RGBW Controller

8. Wiring Diagram:
5-24Vdc 5-24Vdc 5-24Vdc
RGBW Strip RGBW Strip RGBW Strip
— 8 —
T4
12-48Vdc 12-48Vdc 12-48Vdc
……
CV
LED
Panel Light
LED
Panel Light
Round LED
Panel Light
LED RGBW Controller
PW
RUN
LED CONTROLLER
T4-CV
OUTPUT
R G B W V+
RUN
LED CONTROLLER
T4-CV
OUTPUT
R G B W V+
RUN
LED CONTROLLER
T4-CV
OUTPUT
R G B W V+
LED CONTROLLER
T4-CC
RUN
LED CONTROLLER
T4-CC
RUN
LED CONTROLLER
T4-CC
RUN
CC
350mA 700mA
1050mA

9. Other Special Functions:
Turn on the remote, long press the “on/off” key for 5 seconds until the red light flashes 3 times, and then the green light flashes, the
numbers of the green flash will be the frequency point of the remote. you can only edit the frequency point after 3 seconds.
In frequency changing state,
A. Reset Function:
B. Check and Edit the Frequency Point on the Remote:
Long press the 2 keys simultaneously, release after 3 seconds, the remote will auto off, undo for more than 1 minute, means
reset completed. and then could restart the remote.
Feature: Reset function is available when remote operates abnormally.
Operation:
a.
b. Multiple remotes sync-control becomes available when they use the same frequency point.
Revising the frequency point to eliminate the external disturbance. 12 revisable frequency points for user.
Attn: After reset or revised the frequency points in the remote, receivers only can be used after relearn the ID.
Feature:
Check the Frequency Point on the Remote:
Edit the Frequency Point on the Remote:
Method 2: Long press “on/off” key over 5 seconds, the green light flashes, the flash times plus 1 means the frequency point accumulate 1.
In short, long press the “on/off” key over 5 seconds each time, the frequency point will accumulate 1, which will again become value 1
when added to 12, and that cycle repeats.
Method 1: Short press any key from “1-8”, the frequency point will be “1-8” correspondingly, the green light will flash in the same numbers. Then
press any key or touch the color circle to exit the frequency edit state.
— 9 —
LED RGBW Controller