LUCCI Air AIRFUSION ARIA CTC User manual

V1.0 – EU (2019/11)
LUCCI
AIRFUSION ARIA CTC
CEILING FAN
⚫INSTALLATION
⚫OPERATION
⚫MAINTENANCE
⚫WARRANTY INFORMATION
CAUTION
READ INSTRUCTIONS CAREFULLY FOR SAFE
INSTALLATION AND FAN OPERATION.
Without Light
With Light

Aria CTC Installation Instructions
1 | P a g e
ARIA CTC V1.0
EU (2019/11)
CONTENTS
GB
Installation instruction manual .......................................................................................... 2
D
Installationsanleitung ........................................................................................................14
F
Guide d’installation............................................................................................................28
E
Manual de instrucciones de instalación.............................................................................42
I
Manuale delle istruzioni di installazione.............................................................................56
NL
Installatiehandleiding..........................................................................................................69
EL
Εγχειρίδιο οδηγιών εγκατάστασης .....................................................................................82
Contact:
Beacon International Ltd
Hong Kong Head Office: Room 05, 18/F, Kimberland Center, 55 Wing Hong Street, Cheung Sha Wan Kowloon, Hong Kong
Tel [phone] Fax [phone]
China showroom / Office: 11/Fl, Guzhen Lighting Building B, Mid Zhongxing Road, Guzhen, Zhongshan, GuangDong, China.
Tel: [phone] Fax: [phone]
[email protected]
www.beaconinternational.com
Beacon Lighting Europe GmbH
Campus Fichtenhain 42, 47807 Krefeld, Germany
TEL [phone] FAX [phone]
[email protected]
www.beaconlighting.eu

Aria CTC Installation Instructions
2 | P a g e
ARIA CTC V1.0
EU (2019/11)
THANK YOU FOR PURCHASING
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read
and follow all instructions carefully before assembly, installation and use of this ceiling fan. Please keep
instructions for future reference.
SAFETY PRECAUTIONS
1. In Europe: This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the appliance in a safe way and
understand the hazards involved. Cleaning and maintenance shall not be undertaken by children
without supervision.
2. In Australia: The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible for their
safety.
3. Children should be supervised to ensure that they do not play with the appliance.
4. An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local
wiring rules.
IN AUSTRALIA
WARNING:
FOR SAFE USE OF THIS FAN AN ALL-POLE DISCONNECTION
MUST BE INCORPORATED INTO THE FIXED WIRING IN
ACCORDANCE WITH THE WIRING RULES.
As outline in clause 7.12.2 of AS/NZS 60335-1 for meeting the
minimum electrical safety of this standard.
Please note warranty will be void if installation is without a means
for an all-pole disconnection incorporated in the fixed wiring in
accordance with the wiring rules.

Aria CTC Installation Instructions
3 | P a g e
ARIA CTC V1.0
EU (2019/11)
Example: If a fan is connected to a circuit that can be isolated via an
all-pole safety switch at the switchboard, then this is considered to
be an all-pole disconnection to the ceiling fan electrical circuit,
meeting the requirements of clause 7.12.2 of AS/NZS 60335.1.
A single-pole switch on the active of the receiver input of remote
control must also be included in the wiring, and located the
same room as the ceiling fan.
5. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Contact your local government for information regarding the collection systems available. If
electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the
ground water and get into the food chain, damaging your health and well-being.
6. The structure to which the fan is to be mounted must be capable of supporting a weight of 30kg.
7. The fan should be mounted so that the blades are at least 2.3 m above the floor in Europe or 2.1 m
above the floor in Australia.
8. This fan is suitable for indoor, alfresco and coastal areas where the fan is fully undercover with a
minimum of 1 wall. This fan is not waterproof. When installed in an alfresco or coastal area, the
ceiling fan must be positioned in a location protected from water, wind and dust. Exposure to these
elements will void the warranty. Mounting the fan in a situation where it is subject to water or moisture
is dangerous and may increase the risk of damage, injury or electrical shock and will void the warranty.
9. Must be assembled and installed by a licensed electrician.
10. WARNING: If unusual wobbling or oscillating movement is observed, immediately stop using the
ceiling fan and contact the manufacturer, its service agent or suitably qualified persons.
11. The replacement of parts of the safety suspension system device shall be performed by the
manufacturer, its service agent or suitably qualified persons.
12. The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a
sufficient strength to withstand 4 times the weight of the ceiling fan; that the mounting of the
suspension system shall be performed by the manufacturer, its service agent or suitably qualified
persons.

Aria CTC Installation Instructions
4 | P a g e
ARIA CTC V1.0
EU (2019/11)
PARTS LIST
•Unpack your ceiling fan carefully. Remove all parts and hardware.
•Lay out all the components on a smooth surface and make sure there are no components missing
before assembling. If parts are missing, return the complete product to the place of purchase for
inspection or replacement.
•Check whether the ceiling fan has been damaged during transport. Do not operate/install any
product which appears damaged in any way. Return the complete product to the place of purchase
for inspection, repair or replacement.
•Examine all parts, you should have the following list and Fig.1:
Fan with wall controller (no light kit)
(SKU# 212999 & 213000)
Fan with remote controller (with light kit)
(SKU# 213001 & 213002)
1
Mounting bracket x 1
1
Mounting bracket x 1
2
Motor assembly x 1
2
Motor assembly x 1
3
Blades x 4
3
Blades x 4
4
Bottom motor cover x 1
4
LED light kit x 1
5
Motor housing cover x 1
5
Motor housing cover x 1
6
Mounting screws x 4
6
Mounting screws x 4
7
Spare screw for fan blade x 1
7
Spare screw for fan blade x 1
8
Wall switch x 1 set
8
Remote Receiver and Remote x 1 set

Aria CTC Installation Instructions
5 | P a g e
ARIA CTC V1.0
EU (2019/11)
Fig. 1
Fan with wall controller (no light kit) SKU# 212999 & 213000
Fan with remote controller (with light kit) SKU# 213001 & 213002

Aria CTC Installation Instructions
6 | P a g e
ARIA CTC V1.0
EU (2019/11)
INSTALLING THE MOUNTING BRACKET
•The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of
the blade to the nearest objects or walls.
•Install the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least
20kg, with the 4 long screws provided. Ensure at least 30mm of the screw is threaded into the
support. (Fig. 2)
NOTE: The bracket screws provided are for use with wooden structures only. For structures
other than wood, the appropriate screw type MUST be used. Ensure the screws used are
suitable for the mounting surface and the surrounding environment.
ANGLED CEILING INSTALLATION
This fan hanging system DOES NOT support a degree angled ceiling installation.
HANGING THE FAN TO MOTOR ASSEMBLY
•Install the motor housing (1) onto the motor assembly. (Fig.3)
•Lift the fan assembly up to the mounting bracket. Hang the fan assembly onto the J-hook (2) of
the mounting bracket. (Fig.4)
•Complete the electrical wiring according to the ‘ELECTRICAL WIRING DIAGRAM’ section below.
Fig. 3
Fig. 2
20 KG
Fig. 4

Aria CTC Installation Instructions
7 | P a g e
ARIA CTC V1.0
EU (2019/11)
ELECTRICAL WIRING THE FAN
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A
LICENSED ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED
WIRING.
NOTE: Wiring diagram includes the light kit wiring. The light wiring diagram and switch is
omitted when no light kit is used with the ceiling fan.
MODELS WITH WALL CONTROLLER WIRING DIAGRAM (Fig.5):
- Make the wire connection L, N, and Earth to the mounting bracket terminal block as shown the
diagram below in Fig. 5. Note: Ignore the Light kit wiring, as this model does not have a light kit.
- Plug the quick connectors from the fan and the mounting bracket together and ensure they lock.
Fig. 5
Connect and
lock together
FOR SKU# 212999 & 213000

Aria CTC Installation Instructions
8 | P a g e
ARIA CTC V1.0
EU (2019/11)
MODELS WITH REMOTE CONTROLLER WIRING DIAGRAM (Fig.6):
- Make the wire connection L, N, and Earth to the mounting bracket terminal block as shown the
diagram below in Fig. 6.
- Plug the quick connectors from the mounting bracket (1) and from the Remote receiver (2) together
and ensure they lock.
- Plug the quick connectors from the remote receiver (3) and from the Fan (4) together and ensure
they lock.
- Place the Remote reciever into the hanging canopy cavity of the motor assembly with the other
internal wiring.
Fig. 6
FOR SKU# 213001 & 213002

Aria CTC Installation Instructions
9 | P a g e
ARIA CTC V1.0
EU (2019/11)
INSTALL THE FAN ASSEMBLY TO THE MOUNTING BRACKET
•After completing the electrical connection at the mounting bracket terminal block;
- Fan without remote receiver and light kit: connect the ceiling fan wiring via the quick connector
plug;
- Fan with remote receiver and light kit: connect the remote receiver, and ceiling fan via the quick
connector;
•Ensure the earth wiring is secure and correct, by performing an earthing continuity test from the
fan’s accessible metal body back to the earth terminal at the terminal block on the mounting
bracket.
Install the fan assembly to the mounting bracket (Fig.7)
•There are 4 screws pre-installed on the mounting bracket:
- Loosen two canopy screws with star washer (2) by half thread from the mounting bracket. (For L-
shape slot on canopy to be mounted).
- Loosen two canopy screws (1) and remove from the mounting bracket.
•Lift the hanging canopy of the fan assembly up to the mounting bracket and let the L-shape slot on
the hanging canopy go through the two canopy screws with star washer (2).
•Turn the hanging canopy until it locks in place at the end section of the L-shape slot, ensure the
star washer are between the hanging canopy (3) and screw head. Secure it by tightening the two
canopy screws with star washer (2).
•Secure and tighten the canopy screws (1) to the mounting bracket. The hanging canopy (3) shall
have 4 screws (1) & (2) in total. Avoid damaging the electrical wiring prepared previously when
hanging the canopy.
•Finally attach the canopy cover (4) to the mounting bracket, secure it by pushing the hooks of the
canopy cover into the slot holes of the hanging canopy and turn it anti clockwise.
Fig. 7