LUCCI Air AIRFUSION CAROLINA Owner's manual

V1.0 - MUTIL–2015-7-21
LUCCI
AIRFUSION CAROLINA
CEILING FAN
INSTALLATION
OPERATION
MAINTENANCE
WARRANTY INFORMATION
CAUTION
READ INSTRUCTIONS CAREFULLY FOR SAFE
INSTALLATION AND FAN OPERATION.

Airfusion Carolina Installation Instructions
2 | Page
CONTENTS
GB Installation instruction manual .......................................................................................... 3

Airfusion Carolina Installation Instructions
3 | Page
THANK YOU FOR PURCHASING
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read
and save all instructions before using the product.
SAFETY PRECAUTIONS
The information contained in the following pages has been prepared to ensure you of trouble-free
operation of your ceiling fan.
1. In Europe: This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Cleaning and maintenance shall not be undertaken by children without
supervision.
2. In Australia: This appliance is not intended for use by young children or infirm persons unless they
are adequately supervised by a responsible person to ensure that they can use the appliance safely.
3. Children should be supervised to ensure that they do not play with the appliance.
4. An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local
wiring rules.
WARNING: FOR SAFE USE OT THIS FAN AN ALL-POLE DISCONNECTION SWITCH MUST BE
INCORPORATED INTO THE FIXED WIRING.
This is in accordance with the latest standard AS/NZS3000.
Please note warranty will be void if installed without an all-pole disconnection switch.
5. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Contact your local government for information regarding the collection systems
available. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging your health and
well-being.
6. The structure to which the fan is to be mounted must be capable of supporting a weight of 30kg.
7. The fan should be mounted so that the blades are at least 2.3 metres above the floor in Europe or
2.1 metres above the floor in Australia
8. This fan is designed for indoor use only. Mounting the fan in a location where it is subject to water or
moisture is dangerous and will void the warranty.
9. Only a licensed electrician should execute the installation.

Airfusion Carolina Installation Instructions
4 | Page
BEFORE INSTALLATION
Unpack the fan and carefully identify the parts. Please refer to Fig 1.
1 Canopy x 1
2 Down rod x 1
3 Coupling cover x 1
4 Motor assembly x 1
5 Blades assembly x 3
6 Plastic anchors x 2
7 Wood screws x 2
8 Blades screws x 10
9 Balance kit x 1 set
10 Wall switch with mounting screws x 1 set
Fig. 1

Airfusion Carolina Installation Instructions
5 | Page
INSTALLING THE MOUNTING BRACKET
The ceiling fan must be installed in a location so that the blades are a minimum 300mm spacing from
the tip of the blade to the nearest objects or walls.
Secure the hanging bracket to the ceiling joist or structure that is capableof carrying a load of at least
30kg, with the two long screws provided. Ensure at least 30mm of the screw is threaded into the
support.
NOTE: The bracket screws provided are for use with wooden structures only. For structures
other than wood, the appropriate screw type MUST be used.
Angled Ceiling Installation
This fan hanging system supports a maximum 18
degree angled ceiling installation.
Fig. 2
Fig. 3

Airfusion Carolina Installation Instructions
6 | Page
HANGING THE FAN
Lift the fan assembly onto the mounting bracket. Ensure the registration slot of the hanger ball is
positioned on the stopper of the mounting bracket to prevent the fan from rotating when in operation.
(Fig.4)
BLADE INSTALLATION
Blade attachment
Align the 3 holes of the blade (3) to the fan motor assembly (1).
Secure the blade with 3 blade screws and lock washers (2) provided.
Follow the same process for the remaining two blades. (Fig.5)
Fig. 5
Fig. 4

Airfusion Carolina Installation Instructions
7 | Page
ELECTRICAL WIRING DIAGRAM
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A
LICENSED ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED
WIRING.
USE WITH WALL SWITCH WIRING DIAGRAM:
Fig. 6

Airfusion Carolina Installation Instructions
8 | Page
USE WITH REMOTE WIRING DIAGRAM: (REMOTE sold separately)
1/ Remote without plugs
2/ Remote with plugs
Fig. 7
Fig. 8

Airfusion Carolina Installation Instructions
9 | Page
FINISHING THE INSTALLATION
After completing the electrical connection at the mounting bracket terminal block, connect the ceiling
fan wiring via the quick connector plug.
Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy
and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using
the screws provided. Fig. 9
USING YOUR CEILING FAN
FAN WALL CONTROL
Turn on the power and check the operation of the fan.
• OFF Position – fan off
• 3rd Position – low fan speed
• 2nd Position – medium fan speed
• 1st Position – high fan speed
Light Control
• Toggle Switch – on/off
REVERSE FUNCTION
Your ceiling fan can operate either in fan mode or reverse fan mode.
SUMMER Mode: The reverse switch shall be in the “down” (SUMMER) position to make the fan rotate in
the anticlockwise direction. The airflow will be directed downwards, for cooling in summer.
WINTER Mode: The reverse switch shall be in the “up” (WINTER) position to make the fan rotate in
clockwise direction. The airflow will be directed upwards, for energy conservation in winter.
Fig. 10
Fig. 9

Airfusion Carolina Installation Instructions
10 | Page
The reverse switch is located in the top of the motor housing. Slide the switch to the LEFT for summer
weather operation. Slide the switch to the RIGHT for winter weather operation.
Note: You need a small tool to adjust the reverse switch in the top housing.
AFTER INSTALLATION
WOBBLE:
NOTE: CEILING FANS TEND TO MOVE DURING OPERATION DUE TO THE FACT THAT THEY ARE
MOUNTED ON A RUBBER GROMMET. IF THE FAN WAS MOUNTED RIGIDLY TO THE CEILING IT
WOULD CAUSE EXCESSIVE VIBRATION. MOVEMENT OF A FEW CENTIMETRES IS QUITE
ACCEPTABLE AND DOES NOT SUGGEST ANY PROBLEM.
TO REDUCE THE FAN WOBBLE: PLEASE CHECK THAT ALL SCREWS WHICH FIX THE MOUNTING
BRACKET AND DOWN ROD ARE SECURE.
NOTE: This fan has been precision balanced at the factory and will not need to be balanced again.
NOISE:
When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and
frequency signals superimposed in the electricity for off-peak hot water control, may cause a change in
fan motor noise. This is normal. Please allow a 24-hour “breaking-in” period, most noises associated with
a new fan disappear during this time. The manufacturer’s warranty covers actual faults that may develop
and NOT minor complaints such as hearing the motor run – All electric motors are audible tosome extent.
CARE AND CLEANING:
Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free
cloth to avoid scratching the paint finish. Please turn off electricity power when you do so.
Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create
Fig. 11