Lucent Technologies Definity 6408D+ User manual

Version 2
The 6408D+ Users Guide and Quick Reference
The 6408D+ has eight call appearance/feature buttons, a 2-line by 24 character display, and a two-
way speakerphone. The phone can also be wall mountable (Please note: the 6408+ has the same
functionality minus display)
The 6408D+ does not natively support a headset (If you require the use of a Headset, you will need
to upgrade to the 6416D+M or 6424D+M)

Version 2
Line Diagram of the 6408D+
Figure 1

Version 2
Hold
Allows user to place a caller on hold.
To Activate:
Press red Hold button (call appearance light flashes fast when the call
is on hold).
To Cancel:
Press the flashing call appearance button to access the call.
Transfer
Allows user to redirect calls to appropriate extension.
To Use:
1. With first caller on the line, press the Trnsfr button. The call is
automatically put on hold.
2. Listen for dial tone. Dial desired number and introduce caller.
3. Press Trnsfr button.
Conference
Allows user to connect with two to five additional parties.
To Use:
1. Establish call with first party (receive or place).
2. Press Conf button.
3. Place call to second person.
4. Once the second person answers, press the Conf button again.
5. Repeat for each additional party.
Send All Calls (SAC)
Allows calls to go directly to coverage without ringing at the extension.
To Activate:
Press Send Calls or SAC button (light comes on) or dial *3.
To Cancel:
Press Send Calls or SAC again (light goes off) or dial #3.
Priority Calling
Allows user to dial an extension without the call following the coverage
path.
To Use:
Dial *1 and the extension you wish to reach
Speakerphone
Allows user to have a conversation or access voice mail without
picking up the handset.
To Use: Press Spkr (hear dial tone). Dial desired number or use
automatic dial button. You can also just begin dialing while the handset
is on hook.
Select Ring
Allows user to choose one of eight personalized ring patterns.
To Use:
1. While on-hook, press Conf button. The current ringing pattern
will be heard.
2. Continue to press and release the Conf button to cycle through
the ring patterns.
3. To use the ringing pattern currently being played, do not press
Conf again. You will hear the selected ringing pattern two more
times, then two beeps confirming this is the ring pattern you
chose.
Call Forward
Allows user to redirect calls to an alternate number on or off campus.
To Activate:
1. Pick up handset and dial *2 or press the Call-Forward button if
equipped. (Hear dial tone)
2. Dial campus extension or *9 and local number. (Hear
confirmation tone - 3 beeps)
3. Calls normally answered at that extension will now ring at the
alternate number.
To Cancel:
1. Get dial tone and dial #2 or press the Call-Forward button if
equipped.
2. Calls will ring at the original extension.
Speed Dial (also known as Automatic Dialing or Auto Dial)
Allows user to dial fewer digits for frequently called numbers.
To Program:
Pick up handset, dial *0.
Press the AD button to be programmed.
Dial number to be stored (include *9 if off campus).
Press button to be programmed again.
Repeat step 1 –4 for each number.
To Use:
Pick up hand set.
Press desired abbreviated dialing button.
Call Pick-Up
Allows user to answer a ringing phone from another extension.
Extensions must be programmed into the same call pick-up group by
Telecom.
To Use:
When you hear a phone ringing, get dial tone and dial #4 or press the
call pick-up (CPU) button
Test
The Test feature allows you to test the lights and display on your
telephone
To Use:
1. While on-hook, press and hold down Trnsfr .
Lights go on in columns, and if there is a display on the telephone, all
the display segments fill in.
2. To end test, release .
Lights return to normal operation.

Version 2
Using the Soft Keys
Menu Items (For Sets with a Display)
The Menu button will display additional features you can use.
To Use:
Press the Menu button and either Next or Prev. Select the menu item you wish to utilize.
First Screen:
Drop –Drops the call and returns dial tone or drops the last person added to a conference call.
Inspect - Allows user to display the extension number and name for an incoming call while on an active call.
Timer –Measures elapsed time for a call.
BtnVu –Stored Number/View –Select this menu item and press the autodial button. It will display the number
programmed on that button. Press exit to end.
Second Screen:
Date-Time –Displays current date and time.
To Cancel:
Press Exit to return to main screen.

Version 2
Tones and their Meanings
Ringing Tones are produced by in Incoming Call
Feedback Tones are those which you hear through the headset, speaker, or headset (If equipped)

Version 2

Version 2
Line and Feature Button Lights