Lumascape Centria C1 User manual

INSTALLATION INSTRUCTIONS
STAKE MOUNT / CONCRETE ANCHOR
ADJUSTABLE SPOTLIGHT
LUMASCAPE ASIA PACIFIC Brisbane Technology Park, 18 Brandl Street, Eight Mile Plains, QLD 4113, Australia
Phone [phone] | Fax [phone] | Email: [email protected] | www.lumacape.com
LUMASCAPE NORTH AMERICA 1300 Industrial Road, Unit #19, San Carlos, CA 94070, USA
Phone [phone] | Fax [phone] | Email: [email protected] | www.lumacape.com
Products and specifications are subject to change without notice.
USA I Australia I Asia I Middle East I Europe
1 / 2
IN0181 N181205
Centria C1 LS2010
READ ALL SAFETY INSTRUCTIONS FIRST
› Follow instructions carefully, failure to do so will void
warranty.
› Ensure installation complies with local law and
applicable standards.
› Input voltage is 120-277 V AC, 50/60 Hz
› Only use Lumascape power supply, control equipment
and leader cables.
› Ensure mains input power is surge protected.
› Never make connections whilst the power is connected.
› Do not make modifications or alter the product.
› Keep luminaire and connections clean and free of debris
and moisture.
› It is the installers responsibility that the installation is
adequately sealed to avoid moisture ingress.
LS2010

INSTALLATION INSTRUCTIONS
STAKE MOUNT / CONCRETE ANCHOR
ADJUSTABLE SPOTLIGHT
LUMASCAPE ASIA PACIFIC Brisbane Technology Park, 18 Brandl Street, Eight Mile Plains, QLD 4113, Australia
Phone [phone] | Fax [phone] | Email: [email protected] | www.lumacape.com
LUMASCAPE NORTH AMERICA 1300 Industrial Road, Unit #19, San Carlos, CA 94070, USA
Phone [phone] | Fax [phone] | Email: [email protected] | www.lumacape.com
Products and specifications are subject to change without notice.
USA I Australia I Asia I Middle East I Europe
2 / 2
IN0181 N181205
Centria C1 LS2010
Luminaire Tilt
Loosen to adjust luminaire tilt.
Tighten to lock tilt into place. Luminaire Rotation
Loosen to adjust luminaire rotation.
Tighten to lock rotation into place.
Mounting Spike / Concrete Anchor
Place in soil or concrete. It is the installers
responsibility to ensure that the installation
complies with local wiring rules.
Type 77 Connection
Flexible cable, single
entry, for connectorised
installations. Connect to
PowerSync™ leader cable.
Type 84 Connection
Flexible cable, single entry,
forhard wired installations.
Connect to supply
cable. Refer to table for
conductor colour and
designation.
Luminaire can be inserted into
concrete / dry soil to this line.
Power supply must be isolated prior to connection or
disconnection of cables. Failure to do so will result in
damage to the luminaire components.
Colour Designation
Blue Neutral
Green Earth
Brown Active
Black Data