Luxli BICOLOR SFT-10B User manual

Light as soft as a cloud.
As part of Luxli’s Softi series, the 7"Bicolor LED Light provides soft,
luminous light in a compact and lightweight package for attering
portraits.The integrated white diffusion panel results in clean,seamless
illumination.With smooth adjustment knobs for brightness and color
temperature adjustment between 3200–5600 K,the 7"Softi can match
its light to nearly any environment, making it a smart, exible choice
for videographers and photographers alike.

Specications
Light source 104 LEDs (52 × 3200 K and 52 × 5600 K)
Power source Sony L-Series battery
Dimensions (W × D × H) 4.7”× 0.8”× 6.8”(11.9 × 2 × 17.4 cm)
Weight 7.8 oz.(222 g)

Precautions
• Do not attempt to disassemble, repair,or perform any unauthorized
modications on this device.
• Do not handle with wet hands, immerse in liquids, or expose to
water and rain. Electric shock or re may result.
• This device contains small parts which may pose a choking hazard.
Keep out of reach of children.
• Do not operate this device in the presence of ammable gas or
vapor.
• Do not use this product if it emits smoke or a strange odor.
Disconnect the power source immediately to avoid personal injury,
and contact the place of purchase.
• Observe caution when handling batteries; use only batteries
approved by the manufacturer of this product.

• Batteries are prone to leakage when fully discharged.To avoid
damaging this product, be sure to remove batteries when leaving
the product unattended.
• Do not gaze at the LED panel for prolonged periods while the
device is on.
• Do not cover the ventilation grille found at the rear of this device
when in operation, and ensure the light is cool before storing.
• Do not use or leave this device in conditions of extreme heat, severe
cold, or high humidity.
• Dispose of used batteries, packing, and old devices in accordance
with appropriate environmental regulations.
• All images are for illustrative purposes only.

Overview
Back
1. Color temperature dial
2. Brightness dial
3. Battery mount (Use Sony
L-Series battery type)
4. Mounting slot
5. Power switch
6. Battery indicator
ONOFF
TEST
3200K
5600K
1
2
3 4 5 6

Detachable shoe mount
1. Cold-shoe mounts
2. Locking rings
3. Locking knob
4. 1/4"-20 female thread
Also included
• NP-F550 battery
• Battery charger
• User manual
3
4
1
2

Mounting the shoe
1. Loosen one locking ring on the cold shoe mount, and slide it into
the slot at the bottom of the light unit.Tighten the locking ring rmly
to secure the shoe in place.
2. Use the other end of the cold-shoe mount to secure the unit on a
camera or light stand.

Powering the device
Mounting batteries
Place the battery in the battery
mount, aligning the conductor
contacts of the battery with the
metal prongs of the light unit.
Lock it into place by sliding it
leftward until it clicks.
Checking the battery power
While the device is powered on,
hold the battery indicator button
to see how much battery power
is remaining.
ONOFF
TEST
3200K
5600K
TEST

One-Year Limited Warranty
This LUXLI product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer
use for a period of one (1) year from the original purchase date or
thirty (30) days after replacement, whichever occurs later.The warranty
provider’s responsibility with respect to this limited warranty shall be
limited solely to repair or replacement, at the provider’s discretion, of
any product that fails during normal use of this product in its intended
manner and in its intended environment.Inoperability of the product
or part(s) shall be determined by the warranty provider.If the product
has been discontinued, the warranty provider reserves the right to
replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by
misuse, neglect, accident, alteration, abuse, improper installation
or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.This
warranty provides you with specic legal rights, and you may also
have additional rights that vary from state to state.

To obtain warranty coverage, contact the Luxli Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Luxli along with the RMA
number and proof of purchase. Shipment of the defective product is
at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.luxlilight.com or
call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
LUXLI is a registered trademark of the Gradus Group.
© 2016 Gradus Group LLC.All Rights Reserved.
GG1

www.luxlilight.com