Luxli ORC-CELLO-10-DK User manual

USER MANUAL

Thank you for choosing Luxli.
The Luxli CELLO-10-DK diffuser is made specically for Luxli’s Cello 10-
inch RGBAW LED Light. It softens the harsh shadows from the Cello’s
undiffused light, and it also eliminates the multiple shadows that are
common in LED lighting.
The diffuser easily slips over the front of the Cello, and when it’s
employed, the Cello’s beam becomes broader with diffused edges.
Remove the diffuser panel from the exible silicon rubber frame to turn
the unit into a snoot that shapes the beam,adds directional control,
and minimizes light spill.

Precautions
• Please read and follow these instructions, and keep this manual
in a safe place.
• Keep this product away from water and ammable gases or liquids.
• Clean this product with only a soft, dry cloth.
• All images are for illustrative purposes only.

Overview
1. Diffuser frame
2. Diffusion lter
3. Heat dissipation vents
4. Corner tabs
1 2 3 4

Using the Diffuser as a Snoot
To use the diffuser as a snoot, remove the diffusion lter from the rubber
frame.
The resulting beam will not be as wide and will have a more dened
edge.
Note:When reinstalling the diffusion lter into the frame,make sure the
lter’s textured side is facing in toward the light.

Attaching the Diffuser to the Cello
1. Extend the sides of the diffuser, and place it facedown on a at
surface.

2. Place the Cello down onto the frame. Make sure to position the
Cello so the bottom of the unit matches the cutout side of the
diffuser.

3. Lift each corner so each of the Cello’s corners are securely covered
by the frame’s corner tabs.Make sure the edges of the frame wrap
around the Cello to ensure a secure t.
Note: For best results, use the diffuser in the extended position.

Specications
Dimensions (H × W) 5.25 × 10.9 in. (13.3 × 27.7 cm)
Filter Depth Extended:2.2 in.(5.6 cm)
Collapsed: 1.25 in. (3.2 cm)
Weight 7.2 oz.(206 g)

One-Year Limited Warranty
This LUXLI product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer
use for a period of one (1) year from the original purchase date or
thirty (30) days after replacement, whichever occurs later.The warranty
provider’s responsibility with respect to this limited warranty shall be
limited solely to repair or replacement, at the provider’s discretion, of
any product that fails during normal use of this product in its intended
manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider.If the product
has been discontinued, the warranty provider reserves the right to
replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by
misuse, neglect, accident, alteration, abuse, improper installation
or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.This
warranty provides you with specic legal rights, and you may also
have additional rights that vary from state to state.

To obtain warranty coverage, contact the Luxli Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Luxli along with the RMA
number and proof of purchase. Shipment of the defective product is
at the purchaser’s own risk and expense.
For more information or to arrange service,visit www.luxlilight.com or
call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
LUXLI is a registered trademark of the Gradus Group.
© 2018 Gradus Group LLC.All Rights Reserved.

luxlilight.com GG1