
4
MTI P/N 063-1559-00 rev B ©2014 MTI All Rights Reserved
MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com
PROGRAMMING
ARMING
FREEDOM CORE II™USER GUIDE
1
2
2
1
The MCP will beep once the cable is inserted. Press
MCP button once, wait for the beep, then press again.
When the light on the Intellikey turns green, you have
successfully programmed the key and power sensor.
If the key does not turn green,
repeat programming steps above.
NOTE: LED is solid white.
NOTE: LED is solid white.
If using the Screamer Sensor ONLY,
the SmartCable will not be present