MakerBot Replicator User manual

ACCESSORY CHECKLIST
1
Power cord
1
USB A-to-B cable
1 1
Large MakerBot®
PLA Filament spool
WELCOME. LET’S GET YOU PRINTING.
GETTING TO KNOW THE CONTROL PANEL
MAKERBOT DESKTOP SUPPORT
DOWNLOAD THE USER MANUAL
The expert MakerBot Support team is standing by
to help you out with any issues you may encounter
while using your MakerBot Replicator.
[e-mail]
t+1.347.334.6800
MakerBot Support is available Monday through
Saturday 9am - 6pm Eastern.
The MakerBot Replicator Desktop 3D Printer
(Fih Generation Model) is covered by a Limited
Warranty. For terms and conditions, see
makerbot.com/legal
For more in-depth information on setting up and
using your MakerBot®Replicator® Desktop 3D
Printer (Fih Generation Model), download the
full MakerBot Replicator User Manual online.
Available languages include English, French,
German, Spanish and Japanese.
wmakerbot.com/um_rep
Visit our Support page for more advanced
information on the MakerBot Replicator
and MakerBot®Desktop.
wmakerbot.com/support
To prepare files for your MakerBot Replicator to print, you’ll need MakerBot Desktop.
DOWNLOAD
Go to makerbot.com/desktop to download the soware for free.
INSTALL
Open and run the MakerBot Desktop installer.
OPEN
Start up MakerBot Desktop and choose how you will connect to your MakerBot Replicator.
The app will guide you through the rest of the setup process.
1
Build plate
1
Safety booklet
LCD
Screen
Push to
go back or
cancel an
action.
Push to see
additional
options.
Rotate to
scroll. Push
to select.
USB
Port
5
Build plate tape
MakerBot®Replicator®
Smart Extruder

Right
leveling
knob
Front leveling knob
3. INSTALL SMART EXTRUDER
READ OTHER SIDE BEFORE STARTING
12. LEVEL THE BUILD PLATE
4. LIFT FILAMENT DRAWER
9. SLIDE BUILD PLATE INTO PLATFORM
14. CHOOSE A TEST PRINT
FOR MORE INFORMATION
Download the User Manual
makerbot.com/um_rep
11. PRESS DIAL TO START SETUP
13. LOAD FILAMENT
10. PLUG IN AND POWER ON
5. LOAD FILAMENT SPOOL
2. REMOVE CLIPS1. REMOVE PACKAGING MATERIAL
6. ROTATE SPOOL TO ROUTE FILAMENT
8. APPLY TAPE TO BUILD PLATE7. MOVE TUBE ASIDE AND CLOSE DRAWER