Makita DTW1001 User manual

DTW1001
DTW1002
DTW800
EN Cordless Impact Wrench INSTRUCTION MANUAL 4
SL Akumulatorski udarni vijačnik NAVODILA ZA UPORABO 13
SQ Çelës goditës me bateri MANUALI I PËRDORIMIT 22
BG Акумулаторен ударен
гайковерт
РЪКОВОДСТВО ЗА
ЕКСПЛОАТАЦИЯ 31
HR Akumulatorski udarni zavrtač PRIRUČNIK S UPUTAMA 40
МК Безжичен ударен одвртувач УПАТСТВО ЗА УПОТРЕБА 48
SR Бежични ударни кључ УПУТСТВО ЗА УПОТРЕБУ 57
RO Maşină de înşurubat cu
impact cu acumulator MANUAL DE INSTRUCŢIUNI 66
UK Бездротовий ударний
гайковерт
ІНСТРУКЦІЯ З
ЕКСПЛУАТАЦІЇ 75
RU Аккумуляторный ударный
гайковерт
РУКОВОДСТВО ПО
ЭКСПЛУАТАЦИИ 84
Ташев-Галвинг ООД
www.tashev-galving.com

1
2
3
Fig.1
1
Fig.2
1
2
Fig.3
1
Fig.4
1
Fig.5
1
Fig.6
AB
1
Fig.7
1
2
3
4
5
Fig.8
2
Ташев-Галвинг ООД
www.tashev-galving.com

1
2
Fig.9
2
3
1
Fig.10
A
Fig.11
1
2
Fig.12
2
1
3
Fig.13
1
2
3
Fig.14
Fig.15
3
Ташев-Галвинг ООД
www.tashev-galving.com

4ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DTW1001 DTW1002 DTW800
Fastening
capacities
Standard bolt M12 - M30 M12 - M24
High tensile bolt M10 - M24 M10 - M22
Square drive 19 mm 12.7 mm –
Drive shank –11.1 mm Hex.
No load
speed
Impact mode (Hard) 0 - 1,800 min-1
Impact mode (Medium) 0 - 1,000 min-1
Impact mode (Soft) 0 - 900 min-1
Impacts
per minute
Impact mode (Hard) 0 - 2,200 min-1
Impact mode (Medium) 0 - 2,000 min-1
Impact mode (Soft) 0 - 1,800 min-1
Overall length 229 mm
Rated voltage D.C. 18 V
Battery cartridge BL1815N,
BL1820,
BL1820B
BL1830,
BL1830B,
BL1840,
BL1840B,
BL1850,
BL1850B,
BL1860B
BL1815N,
BL1820,
BL1820B
BL1830,
BL1830B,
BL1840,
BL1840B,
BL1850,
BL1850B,
BL1860B
BL1815N,
BL1820,
BL1820B
BL1830,
BL1830B,
BL1840,
BL1840B,
BL1850,
BL1850B,
BL1860B
Net weight 3.4 kg 3.7 kg 3.3 kg 3.6 kg 3.4 kg 3.7 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for fastening bolts and nuts.
Model DTW800: The tool is also intended for drilling
into wood.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model DTW1001
Sound pressure level (LpA) : 98 dB(A)
Sound power level (LWA) : 109 dB (A)
Uncertainty (K) : 3 dB(A)
Model DTW1002
Sound pressure level (LpA) : 97 dB(A)
Sound power level (LWA) : 108 dB (A)
Uncertainty (K) : 3 dB(A)
Model DTW800
Sound pressure level (LpA) : 95 dB(A)
Sound power level (LWA) : 106 dB (A)
Uncertainty (K) : 3dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model DTW1001
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (ah) : 15.5 m/s2
Uncertainty (K) : 2.0 m/s2
Model DTW1002
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (ah) : 18.0 m/s2
Uncertainty (K) : 1.5 m/s2
Model DTW800
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (ah) : 24.0 m/s2
Uncertainty (K) : 2.0 m/s2
Work mode: drilling into wood
Vibration emission (ah) : 7.0 m/s2
Uncertainty (K) : 1.5 m/s2
NOTE: The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
Ташев-Галвинг ООД
www.tashev-galving.com

5ENGLISH
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Cordless Impact Wrench
Model No./ Type: DTW1001, DTW1002, DTW800
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents: EN60745
Thetechnicalleinaccordancewith2006/42/ECis
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
13.5.2015
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
General power tool safety warnings
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tionsmayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless impact wrench safety
warnings
1. Hold power tool by insulated gripping sur-
faces, when performing an operation where
the fastener may contact hidden wiring.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2. Wear ear protectors.
3. Check the impact socket carefully for wear,
cracks or damage before installation.
4. Hold the tool rmly.
5. Always be sure you have a rm footing.
Be sure no one is below when using the tool in
high locations.
6. The proper fastening torque may differ
depending upon the kind or size of the bolt.
Check the torque with a torque wrench.
7. Use auxiliary handle(s), if supplied with the
tool.Lossofcontrolcancausepersonalinjury.
8. Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
9. Keep hands away from rotating parts.
10. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
11. Some material contains chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow material supplier
safety data.
SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
ow, overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
7. Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
out. The battery cartridge can explode in a re.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
Ташев-Галвинг ООД
www.tashev-galving.com

6ENGLISH
10. The contained lithium-ion batteries are subject
to the Dangerous Goods Legislation require-
ments.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
11. Follow your local regulations relating to dis-
posal of battery.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causingres,personalinjuryanddamage.Itwillalso
void the Makita warranty for the Makita tool and charger.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely dis-
charged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge if you do not use
it for a long period (more than six months).
FUNCTIONAL
DESCRIPTION
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Installing or removing battery
cartridge
CAUTION: Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery car-
tridge rmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridgermlymaycausethemtoslipoffyourhands
and result in damage to the tool and battery cartridge
andapersonalinjury.
►Fig.1: 1. Red indicator 2. Button 3. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
CAUTION: Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
itmayaccidentallyfalloutofthetool,causinginjuryto
you or someone around you.
CAUTION: Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
Battery protection system
Lithium-ion battery with star marking
►Fig.2: 1. Star marking
Lithium-ion batteries with a star marking are equipped
with a protection system. This system automatically
cuts off power to the tool to extend battery life.
The tool will automatically stop during operation if the
tool and/or battery are placed under one of the following
conditions:
Overloaded:
The tool is operated in a manner that causes it to draw
an abnormally high current.
In this situation, turn the tool off and stop the application
that caused the tool to become overloaded. Then turn
the tool on to restart.
If the tool does not start, the battery is overheated. In
this situation, let the battery cool before turning the tool
on again.
Low battery voltage:
The remaining battery capacity is too low and the tool
will not operate. In this situation, remove and recharge
the battery.
Ташев-Галвинг ООД
www.tashev-galving.com

7ENGLISH
Indicating the remaining battery
capacity
Only for battery cartridges with "B" at the end of the
model number
►Fig.3: 1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for few seconds.
Indicator lamps Remaining
capacity
Lighted Off Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Switch action
►Fig.4: 1. Switch trigger
CAUTION: Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
NOTE: The tool automatically stops if you keep pull-
ing the switch trigger for about 6 minutes.
Lighting up the front lamp
CAUTION: Do not look in the light or see the
source of light directly.
►Fig.5: 1. Lamp
►Fig.6: 1. Button
To turn on the lamp status, press the button for
one second. To turn off the lamp status, press the but-
ton for one second again.
With the lamp status ON, pull the switch trigger to turn
on the lamp. To turn off, release it. The lamp goes out
approximately 10 seconds after releasing the switch
trigger.
With the lamp status OFF, the lamp does not turn on
even if pulling the trigger.
NOTE:Toconrmthelampstatus,pullthetrigger.
When the lamp lights up by pulling the switch trigger,
the lamp status is ON. When the lamp does not come
on, the lamp status is OFF.
NOTE:Whenthetoolisoverheated,thelightashes
for one minute, and then the LED display goes off. In
this case, cool down the tool before operating again.
NOTE: Use a dry cloth to wipe the dirt off the lens of
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
NOTE: While pulling the switch trigger, the lamp
status cannot be changed.
NOTE: For approximately 10 seconds after releasing
the switch trigger, the lamp status can be changed.
Reversing switch action
►Fig.7: 1. Reversing switch lever
CAUTION: Always check the direction of
rotation before operation.
CAUTION: Use the reversing switch only after
the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may dam-
age the tool.
CAUTION: When not operating the tool,
always set the reversing switch lever to the neu-
tral position.
This tool has a reversing switch to change the direction
of rotation. Depress the reversing switch lever from the
A side for clockwise rotation or from the B side for coun-
terclockwise rotation.
When the reversing switch lever is in the neutral posi-
tion, the switch trigger cannot be pulled.
Ташев-Галвинг ООД
www.tashev-galving.com

8ENGLISH
Changing the impact force
►Fig.8: 1. Changed in three steps 2. Hard 3. Medium
4. Soft 5. Button
You can change the impact in three steps: hard, medium and soft mode.
This allows a tightening suitable to the work.
Every time the button is pressed, the number of blows changes in three steps.
For approximately one minute after releasing the switch trigger, the impact force can be changed.
Specications of each impact force grade
Impact force grade displayed on
panel
Maximum blows Application
DTW1001 DTW1002 DTW800
Hard 2,200 min-1 (/min) Tightening when force and speed are desired.
Medium 2,000 min-1 (/min) Tightening when you need good controlled power.
Soft 1,800 min-1 (/min) Tighteningwhenyouneedneadjustmentwith
small diameter bolt.
Impact force/bolt size corresponding chart (reference)
Impact force grade displayed on
panel
DTW1001 DTW1002 DTW800
Standard bolt High tensile
bolt
Standard bolt High tensile
bolt
Standard bolt High tensile
bolt
Hard M20 - M30
(3/4″-1-1/4″)
M16 - M24
(5/8″-1″)
M20 - M30
(3/4″-1-1/4″)
M16 - M24
(5/8″-1″)
M20 - M24
(3/4″-1″)
M16 - M22
(5/8″-7/8″)
Medium M16 - M24
(5/8″-1″)
M12 - M20
(1/2″-3/4″)
M16 - M24
(5/8″-1″)
M12 - M20
(1/2″-3/4″)
M14 - M20
(9/16″-3/4″)
M10 - M16
(3/8″-5/8″)
Soft M12 - M20
(1/2″-3/4″)
M10 - M16
(3/8″-5/8″)
M12 - M20
(1/2″-3/4″)
M10 - M16
(3/8″-5/8″)
M12 - M16
(1/2″-5/8″)
M10 - M12
(3/8″-1/2″)
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Selecting correct impact socket
Always use the correct size impact socket for bolts and
nuts. An incorrect size impact socket will result in inac-
curate and inconsistent fastening torque and/or damage
to the bolt or nut.
Installing or removing impact socket
Only for Model DTW1001,DTW1002 (optional
accessory)
CAUTION: Make sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
For impact socket without O-ring and pin
►Fig.9: 1. Impact socket 2. Square drive
Align the square of the impact socket with the square
drive and push the impact socket onto the square drive
until it locks into place. Tap it lightly if required.
To remove the impact socket, simply pull it off.
Ташев-Галвинг ООД
www.tashev-galving.com

9ENGLISH
For impact socket with O-ring
and pin
Only for Model DTW1001
►Fig.10: 1. Impact socket 2. O-ring 3. Pin
Move the O-ring out of the groove in the impact socket
and remove the pin from the impact socket. Fit the
impact socket onto the square drive so that the hole in
the impact socket is aligned with the hole in the square
drive.
Insert the pin through the hole in the impact socket and
square drive. Then return the O-ring to the original posi-
tion in the impact socket groove to retain the pin.
To remove the impact socket, follow the installation
procedures in reverse.
Installing or removing drill bit/
socket adapter
Only for Model DTW800 (optional accessory)
►Fig.11
A=11.2 mm
Useonlythedrillbit/socketadaptershowninthegure.
Do not use any other drill bit/socket adapter.
►Fig.12: 1. Drill bit 2. Sleeve
To install the drill bit, pull the sleeve in the direction of
the arrow and insert the drill bit into the sleeve as far as
it will go.
Then release the sleeve to secure the drill bit.
To remove the drill bit, pull the sleeve in the direction of
the arrow and pull the drill bit out.
NOTE: If the drill bit is not inserted deep enough into
the sleeve, the sleeve will not return to its original
position and the drill bit will not be secured. In this
case, try re-inserting the drill bit according to the
instructions above.
NOTE: After inserting the drill bit, make sure that it is
rmlysecured.Ifitcomesout,donotuseit.
Ring
Only for Model DTW800
►Fig.13: 1. Bracket 2. Ring 3. Screws
The ring is convenient for hanging the tool with hoist.
First, place the rope through the ring. Then hang the
tool up to the air with hoist.
CAUTION: Before using the ring, always
make sure that the bracket and ring are secured
and not damaged.
Installing hook
►Fig.14: 1. Groove 2. Hook 3. Screw
The hook is convenient for temporarily hanging the tool.
This can be installed on either side of the tool. To install
the hook, insert it into a groove in the tool housing
on either side and then secure it with two screws. To
remove, loosen the screws and then take it out.
OPERATION
CAUTION: Always insert the battery cartridge
all the way until it locks in place. If you can see the
red indicator on the upper side of the button, it is not
locked completely. Insert it fully until the red indicator
cannot be seen. If not, it may accidentally fall out of
thetool,causinginjurytoyouorsomeonearound
you.
►Fig.15
Holdthetoolrmlyandplacetheimpactsocketover
the bolt or nut. Turn the tool on and fasten for the proper
fastening time.
The proper fastening torque may differ depending upon
the kind or size of the bolt, the material of the workpiece
to be fastened, etc. The relation between fastening
torqueandfasteningtimeisshowninthegures.
Ташев-Галвинг ООД
www.tashev-galving.com

10 ENGLISH
Model DTW1001
Proper fastening torque for standard bolt
1
2
N•m
(kgf•cm)
800
600
400
200
(2040)
(4080)
(6120)
(8160)
1023
0
M24(1″)
M24(1″)
M30(1-1/4″)
M30(1-1/4″)
1. Fastening time (second) 2. Fastening torque
Proper fastening torque for high tensile bolt
1023456
0
800
600
400
200
(2040)
(4080)
(6120)
(8160)
N•m
(kgf•cm)
2
1
M24(1″)
M24(1″)
M22(7/8″)
M22(7/8″)
M20(3/4″)
M20(3/4″)
1. Fastening time (second) 2. Fastening torque
Model DTW1002
Proper fastening torque for standard bolt
1
2
N•m
(kgf•cm)
800
600
400
200
(2040)
(4080)
(6120)
(8160)
1023
0
M24(1″)
M24(1″)
M30(1-1/4″)
M30(1-1/4″)
1. Fastening time (second) 2. Fastening torque
Proper fastening torque for high tensile bolt
1023456
0
800
600
400
200
(2040)
(4080)
(6120)
(8160)
N•m
(kgf•cm)
2
1
M24(1″)
M24(1″)
M22(7/8″)
M22(7/8″)
M20(3/4″)
M20(3/4″)
1. Fastening time (second) 2. Fastening torque
Ташев-Галвинг ООД
www.tashev-galving.com

11 ENGLISH
Model DTW800
Proper fastening torque for standard bolt
N•m
(kgf•cm)
1
1
02
3
0
400
200
(2040)
(4080)
M20(3/4″)
M20(3/4″)
M24(1″)
M24(1″)
2
1. Fastening time (second) 2. Fastening torque
Proper fastening torque for high tensile bolt
1023456
0
800
600
400
200
(2040)
(4080)
(6120)
(8160)
N•m
(kgf•cm)
1
2
M22(7/8″)
M20(3/4″)
M20(3/4″)
M16(5/8″)
M16(5/8″)
M22(7/8″)
1. Fastening time (second) 2. Fastening torque
NOTE: Hold the tool pointed straight at the bolt or nut.
NOTE: Excessive fastening torque may damage the
bolt/nutorimpactsocket.Beforestartingyourjob,
always perform a test operation to determine the
proper fastening time for your bolt or nut.
NOTE:
If the tool is operated continuously until the bat-
tery cartridge has discharged, allow the tool to rest for 15
minutes before proceeding with a fresh battery cartridge.
The fastening torque is affected by a wide variety of
factors including the following. After fastening, always
check the torque with a torque wrench.
1.
When the battery cartridge is discharged almost completely,
voltage will drop and the fastening torque will be reduced.
2. Impact socket
• Failure to use the correct size impact socket
will cause a reduction in the fastening torque.
• A worn impact socket (wear on the hex end
or square end) will cause a reduction in the
fastening torque.
3. Bolt
•
Eventhoughthetorquecoefcientandtheclass
of bolt are the same, the proper fastening torque
will differ according to the diameter of bolt.
• Even though the diameters of bolts are the
same, the proper fastening torque will differ
accordingtothetorquecoefcient,theclass
of bolt and the bolt length.
4.
Theuseoftheuniversaljointortheextensionbarsome-
what reduces the fastening force of the impact wrench.
Compensate by fastening for a longer period of time.
5. The manner of holding the tool or the material of
driving position to be fastened will affect the torque.
6. Operating the tool at low speed will cause a reduc-
tion in the fastening torque.
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Ташев-Галвинг ООД
www.tashev-galving.com

12
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injurytopersons.Onlyuseaccessoryorattachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Impact socket
• Drill bits (only for Model DTW800)
• Extension bar
• Universaljoint
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
ENGLISH
Ташев-Галвинг ООД
www.tashev-galving.com

13
SLOVENŠČINA (Originalna navodila)
TEHNIČNI PODATKI
Model: DTW1001 DTW1002 DTW800
Zatezne
zmogljivosti
Standardnivijak M12 – M30 M12 – M24
Visokonateznivijak M10 – M24 M10 – M22
Kvadratni pogon 19 mm 12,7 mm –
Nastavek pogona –11,1 mm šestrobi.
Hitrost
brez obre-
menitve
Načinudarca(močno) 0 - 1.800 min-1
Načinudarca(srednje) 0 - 1.000 min-1
Načinudarca(rahlo) 0 - 900 min-1
Udarci na
minuto
Načinudarca(močno) 0 - 2.200 min-1
Načinudarca(srednje) 0 - 2.000 min-1
Načinudarca(rahlo) 0 - 1.800 min-1
Celotnadolžina 229 mm
Nazivna napetost D.C. 18 V
Baterijskivložek BL1815N,
BL1820,
BL1820B
BL1830,
BL1830B,
BL1840,
BL1840B,
BL1850,
BL1850B,
BL1860B
BL1815N,
BL1820,
BL1820B
BL1830,
BL1830B,
BL1840,
BL1840B,
BL1850,
BL1850B,
BL1860B
BL1815N,
BL1820,
BL1820B
BL1830,
BL1830B,
BL1840,
BL1840B,
BL1850,
BL1850B,
BL1860B
Netoteža 3,4 kg 3,7 kg 3,3 kg 3,6 kg 3,4 kg 3,7 kg
• Kernenehnoopravljamoraziskaveinrazvijamosvojeizdelke,selahkotehničnipodatkivtemdokumentu
spremenijobrezobvestila.
• Tehničnipodatkiinbaterijskivložkiselahkorazlikujejogledenadržavouporabeizdelka.
• TežaskupajzbaterijskimvložkomvskladuspostopkomEPTA01/2003
Predvidena uporaba
Orodjejenamenjenozapritrjevanjevijakovinmatic.
ModelDTW800:Orodjejenamenjenotudizavrtanje
v les.
Hrup
ObičajnaA-ovrednotenaravenhrupavskladuz
EN60745:
Model DTW1001
Ravenzvočnegatlaka(LpA): 98 dB (A)
Ravenzvočnemoči(LWA): 109 dB (A)
Odstopanje(K):3dB(A)
Model DTW1002
Ravenzvočnegatlaka(LpA): 97 dB (A)
Ravenzvočnemoči(LWA): 108 dB (A)
Odstopanje(K):3dB(A)
Model DTW800
Ravenzvočnegatlaka(LpA): 95 dB (A)
Ravenzvočnemoči(LWA): 106 dB (A)
Odstopanje(K):3dB(A)
OPOZORILO: Uporabljajte zaščito za sluh.
Vibracije
Skupnevrednostivibracij(vektorskavsotatrehosi)v
skladu z EN60745:
Model DTW1001
Delovninačin:udarnoprivijanjepritrjevalnikovznajve-
čjozmogljivostjoorodja
Emisijevibracij(ah): 15,5 m/s2
Odstopanje(K):2,0m/s2
Model DTW1002
Delovninačin:udarnoprivijanjepritrjevalnikovznajve-
čjozmogljivostjoorodja
Emisijevibracij(ah): 18,0 m/s2
Odstopanje(K):1,5m/s2
Model DTW800
Delovninačin:udarnoprivijanjepritrjevalnikovznajve-
čjozmogljivostjoorodja
Emisijevibracij(ah): 24,0 m/s2
Odstopanje(K):2,0m/s2
Delovninačin:vrtanjevles
Emisijevibracij(ah): 7,0 m/s2
Odstopanje(K):1,5m/s2
OPOMBA:Navedenavrednostoddajanjavibracij
jebilaizmerjenavskladusstandardnimimetodami
testiranjainselahkouporabljazaprimerjavoorodij.
OPOMBA:Navedenavrednostoddajanjavibra-
cijselahkouporabljatudipripredhodnioceni
izpostavljenosti.
SLOVENŠČINA
Ташев-Галвинг ООД
www.tashev-galving.com

14 SLOVENŠČINA
OPOZORILO:Oddajanjevibracijmeddejansko
uporaboelektričnegaorodjaselahkorazlikujeod
navedenevrednostioddajanja,odvisnoodnačina
uporabeorodja.
OPOZORILO:Upravljavecmorazalastnozaš-
čitopoznativarnostneukrepe,kitemeljijonaoceni
izpostavljenostivdejanskihpogojihuporabe(poleg
časaproženjajetrebaupoštevaticelotendelovni
cikel,vključnosčasom,kojeorodjeizklopljeno,in
časom,kodelujevprostemteku).
ES Izjava o skladnosti
Samo za evropske države
DružbaMakitaizjavlja,dasonaslednjiizdelki:
Oznakastroja:Akumulatorskiudarnivijačnik
Številka/tip modela: DTW1001, DTW1002, DTW800
skladniznaslednjimievropskimidirektivami:
2006/42/ES
Izdelanisovskladuznaslednjimstandardomalistan-
dardiziranimi dokumenti: EN60745
Tehničnadokumentacijavskladuzdirektivo2006/42/
ESjenavoljonanaslovu:
Makita,Jan-BaptistVinkstraat2,3070,Belgija
13.5.2015
Yasushi Fukaya
Direktor
Makita,Jan-BaptistVinkstraat2,3070,Belgija
Splošna varnostna opozorila za
električno orodje
OPOZORILO: Preberite vsa varnostna opo-
zorila in navodila. Neupoštevanjeopozorilinnavodil
lahkoprivededoelektričnegaudara,požarain/ali
resnih telesnih poškodb.
Shranite vsa opozorila in navo-
dila za poznejšo uporabo.
Izraz„električnoorodje“vopozorilihsenanašanavašeelektrično
orodje(skablom)alibaterijskoelektričnoorodje(brezkabla).
Varnostna opozorila za
akumulatorski udarni vijačnik
1. Če obstaja nevarnost, da bi s pritrjevalnikom
prerezali skrito električno napeljavo, držite ele-
ktrično orodje na izoliranih držalnih površinah.
Obstikuzvodnikipodnapetostjodobijonapetost
vsineizoliranikovinskidelielektričnegaorodja,
zaradičesarlahkopridedoelektričnegaudara.
2. Uporabljajte zaščito za sluh.
3. Pred namestitvijo skrbno preverite udarni
nastavek glede obrabe, razpok ali poškodb.
4. Trdno držite orodje.
5. Vedno zagotovite, da imate trden oprijem na
podlagi, kjer stojite.
Kadar uporabljate orodje na višini, se prepri-
čajte, da spodaj ni nikogar.
6. Pravilni pritrdilni moment se lahko razlikuje
glede na vrsto in velikost vijaka. Navor preve-
rite z momentnim ključem.
7. Uporabite pomožne ročaje, če so dobavljeni
z orodjem.Izgubanadzoralahkopovzroči
poškodbe oseb.
8. Če obstaja nevarnost, da bi z rezilnim orodjem
prerezali skrito električno napeljavo, držite ele-
ktrično orodje na izoliranih držalnih površinah.
Obstikuzvodnikipodnapetostjodobijonapetost
vsineizoliranikovinskidelielektričnegaorodja,
zaradičesarlahkouporabnikutrpielektričniudar.
9. Ne približujte rok vrtečim se delom.
10. Takoj po končani obdelavi se ne dotikajte
vrtalnega nastavka ali obdelovanca; lahko sta
zelo vroča in povzročita opekline kože.
11. Nekateri materiali vsebujejo kemikalije, ki so
lahko strupene. Bodite previdni in preprečite
vdihavanje prahu in stik s kožo. Upoštevajte
varnostne podatke dobavitelja materiala.
SHRANITE TA NAVODILA.
OPOZORILO: NE dovolite, da bi zaradi udob-
nejšega dela ali znanja o uporabi izdelka (prido-
bljenega z večkratno uporabo) opustili strogo
upoštevanje varnostnih zahtev v okviru pravilne
uporabe orodja.
ZLORABA ali neupoštevanje varnostnih zahtev
v teh navodilih za uporabo lahko povzroči resne
telesne poškodbe.
Pomembna varnostna navodila za
akumulatorsko baterijo
1. Pred uporabo baterijskega vložka preberite
vsa navodila in opozorilne oznake na (1) pol-
nilniku akumulatorja, (2) akumulatorju in (3)
izdelku, ki uporablja akumulator.
2. Ne razstavljajte baterijskega vložka.
3. Če se je čas delovanja občutno skrajšal, takoj
prenehajte uporabljati orodje. V nasprotnem
primeru lahko pride do pregretja, morebitnih
opeklin in celo eksplozije.
4. Če pride elektrolit v stik z očmi, jih sperite s
čisto vodo in takoj poiščite zdravniško pomoč.
Posledica je lahko izguba vida.
5.
Ne povzročite kratkega stika baterijskega vložka:
(1) Ne dotikajte se priključkov s kakršnim
koli prevodnim materialom.
(2) Izogibajte se shranjevanju baterijskega
vložka v vsebniku z drugimi kovinskimi
predmeti kot so žeblji, kovanci itn.
(3) Ne izpostavljajte baterijskega vložka vodi
ali dežju.
Kratek stik akumulatorja lahko povzroči velik
električni tok, pregrevanje, morebitne opekline
in celo okvaro.
6. Ne shranjujte orodja in baterijskega vložka
na mestih, kjer lahko temperatura doseže ali
preseže 50 °C.
7. Ne sežigajte baterijskega vložka, tudi če je
hudo poškodovan ali v celoti izpraznjen.
Baterijski vložek lahko v ognju eksplodira.
Ташев-Галвинг ООД
www.tashev-galving.com

15 SLOVENŠČINA
8. Poskrbite, da akumulator ne bo izpostavljen
padcem ali udarcem.
9. Ne uporabljajte poškodovanih akumulatorjev.
10. Priložene litij-ionske baterije ustrezajo zahte-
vam zakonodaje v zvezi z nevarnim blagom.
Zakomercialneprevoze,npr.tiste,kijihopravljajo
tretjestrankeincarinskiposredniki,jetrebaupo-
števatiposebnezahtevevzvezizembalažoin
označevanjem.
Med postopkom priprave na odpremo izdelka se
jetrebaposvetovatisstrokovnjakomzanevarne
snovi.Pritemupoštevajtetudipodrobnejšenacio-
nalne predpise.
Odprtestikeoblepitezlepilnimtrakomalijihdru-
gačezaščitite,baterijopazapakirajtetako,dasev
embalažinemorepremikati.
11. Upoštevajte lokalne uredbe glede odlaganja
akumulatorja.
SHRANITE TA NAVODILA.
POZOR: Uporabljajte le originalne baterije
Makita.ČeuporabljateneoriginalnebaterijeMakita
alibaterije,kisobilespremenjene,lahkopridedo
eksplozijebaterijeinposledičnodopožara,telesnih
poškodb ali materialne škode. S takšno uporabo
bostetudirazveljaviligarancijoMakitazaorodjein
polnilnik Makita.
Nasveti za ohranjanje največje
zmogljivosti akumulatorja
1. Napolnite baterijski vložek, preden se v celoti
izprazni. Ko opazite, da ima orodje manjšo
moč, vedno ustavite delovanje orodja in napol-
nite baterijski vložek.
2. Nikoli znova ne polnite popolnoma napol-
njenega baterijskega vložka. Prenapolnjenje
skrajša življenjsko dobo akumulatorja.
3. Baterijski vložek s sobno temperaturo pol-
nite pri temperaturi okolja od 10 °C do 40 °C.
Počakajte, da se vroč baterijski vložek pred
polnjenjem ohladi.
4. Če baterijskega vložka ne uporabljate dalj časa
(več kot 6 mesecev), ga napolnite.
OPIS DELOVANJA
POZOR: Pred nastavljanjem ali preizkusom
delovanja orodja se prepričajte, ali je orodje
izključeno in ali je akumulatorska baterija
odstranjena.
Nameščanje ali odstranjevanje
akumulatorske baterije
POZOR: Vedno izklopite orodje, preden name-
stite ali odstranite akumulatorsko baterijo.
POZOR: Kadar nameščate ali odstranjujete
akumulatorsko baterijo, trdno držite orodje in
akumulatorsko baterijo.Čeorodjainakumulatorske
baterijenedržitetrdno,selahkozgodi,davamzdr-
snetaizrok,posledicapajelahkopoškodbaorodjain
akumulatorskebaterijetertelesnapoškodba.
►Sl.1: 1.Rdečiindikator2. Gumb 3.Baterijskivložek
Čeželiteodstranitiakumulatorskobaterijo,jopotisnite
izorodja,pritempapomikajtegumbnasprednjistrani
vložka.
Akumulatorskobaterijovstavitetako,daporavnate
jezičeknabaterijizutoromnaohišjuinjopotisnetev
ležišče.Potisnitejodokonca,dasezaskoči.Čejerdeči
indikatornazgornjistranigumbaviden,pomeni,da
baterijaniustreznozaklenjena.
POZOR: Vedno namestite akumulatorsko
baterijo tako, da rdeči indikator ni več viden.Če
teganeupoštevate,lahkobaterijanepričakovano
padeizorodjainpoškodujevasaliosebevneposre-
dnibližini.
POZOR: Ne nameščajte akumulatorske bate-
rije s silo.Česeakumulatorskabaterijanezaskoči
zlahka,nipravilnovstavljena.
Sistem za zaščito akumulatorja
Litij-ionski akumulatorji z oznako zvezde
►Sl.2: 1. Oznaka zvezde
Litij-ionskiakumulatorjizoznakozvezdesoopremljeni
zzaščitnimsistemom.Sistemsamodejnoprekine
napajanjeorodja,dasepodaljšaživljenjskadoba
akumulatorja.
Orodjesebosamodejnozaustavilomeddelovanjem,
čestaorodjein/aliakumulatorzamenjanapodnasle-
dnjimipogoji:
Preobremenjeno:
Orodjedelujenanačin,zaradikateregaprihajado
neobičajnovisokegatoka.
Vtemprimeruizklopiteorodjeinprenehajteizvajati
delo,kijepovzročilopreobremenitevorodja.Natovklo-
piteorodjeingaznovazaženite.
Česeorodjenevklopi,jeakumulatorpregret.Vtem
primerupustite,daseakumulatorohladi,predenorodje
znova vklopite.
Nizka napetost akumulatorja:
Napolnjenostakumulatorjajeprenizka,zatoorodjene
deluje.Vtemprimeruodstraniteinnapolniteakumulator.
Ташев-Галвинг ООД
www.tashev-galving.com

16 SLOVENŠČINA
Prikazuje preostalo raven
napolnjenosti akumulatorja
Samo za baterijske vložke z znakom „B“ na koncu
številke modela
►Sl.3: 1.Indikatorskelučke2.Gumbzapreverjanje
Pritisnitegumbzapreverjanjenabaterijskemvložku,
dapreveriteravennapolnjenostiakumulatorja.
Indikatorskelučkenakratkozasvetijo.
Indikatorske lučke Prikaz pre-
ostale ravni
napolnjenosti
Sveti Ne sveti Utripa
od 75 % do
100 %
od 50 % do
75 %
od 25 % do
50 %
od 0 % do
25 %
Napolnite
akumulator.
Akumulator
jemorda
okvarjen.
OPOMBA:Odvisnoodpogojevuporabeinokoljske
temperatureseoznačbalahkonekolikorazlikujeod
dejanskenapolnjenosti.
Delovanje stikala
►Sl.4: 1.Sprožilnostikalo
POZOR: Preden vstavite akumulatorsko
baterijo v orodje, se vedno prepričajte, da stikalo
deluje brezhibno in se vrača v položaj za izklop
(OFF), ko ga spustite.
Zazagonorodjapovlecitesprožilnostikalo.Hitrost
orodjasepovečazapovečanitlaknasprožilnemsti-
kalu. Za izklop spustite stikalo.
OPOMBA:Orodjesesamodejnoustavi,čedržite
sprožilnostikalopritisnjenopribližno6minut.
Vklop sprednje lučke
POZOR: Ne glejte neposredno v lučko ali vir
svetlobe.
►Sl.5: 1.Lučka
►Sl.6: 1. Gumb
Zavkloplučkepridržitegumb pritisnjeneno
sekundo.Zaizkloplučkeznovapridržitegumb pri-
tisnjenenosekundo.
KojestanjelučkeVKLOPLJENO,pritisnitesprožilno
stikalozavkloplučke.Zaizkloppagaspustite.Lučka
seizklopipribližno10sekundzatem,kospustitespro-
žilnostikalo.
KojestanjelučkeIZKLOPLJENO,lučkanezasveti,tudi
čepritisnetesprožilnik.
OPOMBA:Zapotrditestanjalučkepritisnitesprožil-
nik.Čelučkazasveti,kopritisnetesprožilnostikalo,
jestanjelučkeVKLOPLJENO.Čelučkanezasveti,
potemjestanjelučkeIZKLOPLJENO.
OPOMBA:Čejeorodjepregreto,lučkautripaeno
minuto, nato pa se LED zaslon izklopi. V tem primeru
predponovnouporaboohladiteorodje.
OPOMBA: Uporabite suho krpo, da obrišete umaza-
nijozlečelučke.Pazite,daneopraskatesteklalučke,
kerpraskeobčutnozmanjšajosvetilnost.
OPOMBA:Medpritiskanjemsprožilnegastikalani
mogočespreminjatistanjalučke.
OPOMBA:Približno10sekundzatem,kospustite
sprožilnostikalo,lahkospremenitestanjelučke.
Stikalo za preklop smeri vrtenja
►Sl.7: 1.Ročicazapreklopsmerivrtenja
POZOR: Pred obratovanjem vedno preverite
smer vrtenja.
POZOR: Stikalo za spreminjanje smeri vrtenja
uporabite šele, ko se stroj popolnoma ustavi.Če
smervrtenjaspremenite,predensestrojustavi,seta
lahkopoškoduje.
POZOR: Ko orodja ne uporabljate, vedno poti-
snite preklopno stikalo v nevtralen položaj.
Toorodjejeopremljenospreklopnikomzaspremembo
smerivrtenja.Ročicopreklopnikasmerivrtenjapritisnite
vsmeriAzavrtenjevsmeriurnegakazalcainvsmeriB
zavrtenjevobratnismeriurnegakazalca.
Kojepreklopnostikalovnevtralnempoložaju,seglav-
nega stikala ne da premakniti.
Ташев-Галвинг ООД
www.tashev-galving.com

17 SLOVENŠČINA
Sprememba udarne sile
►Sl.8: 1.Spremenjenovtrehkorakih2.Močno
3.Srednje4. Rahlo 5. Gumb
Udarnosilolahkospreminjatevtrehkorakih:močno,srednjeinrahlo.
Toomogočaprivijanje,kijeprimernozadelo.
Vsakič,kopritisnetegumb , se število udarcev spremeni v treh korakih.
Približnoenominutozatem,kospustitesprožilnostikalo,lahkospremeniteudarnosilo.
Specikacije vsake posamezne stopnje udarne sile
Stopnja udarne sile, prikazana na
plošči
Največje število udarcev Uporaba
DTW1001 DTW1002 DTW800
Močno 2.200 min-1 (/min) Privijanje,kadarželitemočinhitrost.
Srednje 2.000 min-1 (/min) Privijanje,kadarpotrebujeteustreznonadzorovano
moč.
Rahlo 1.800 min-1 (/min) Privijanje,kadarpotrebujetenoprilagajanjes
sornikommajhnegapremera.
Grakon razmerja udarne sile/velikosti sornikov (referenca)
Stopnja udarne sile, prikazana
na plošči
DTW1001 DTW1002 DTW800
Standardni
vijak
Visoko
natezni vijak
Standardni
vijak
Visoko
natezni vijak
Standardni
vijak
Visoko
natezni vijak
Močno M20 - M30
(3/4″-1-1/4″)
M16 - M24
(5/8″-1″)
M20 - M30
(3/4″-1-1/4″)
M16 - M24
(5/8″-1″)
M20 - M24
(3/4″-1″)
M16 - M22
(5/8″-7/8″)
Srednje M16 - M24
(5/8″-1″)
M12 - M20
(1/2″-3/4″)
M16 - M24
(5/8″-1″)
M12 - M20
(1/2″-3/4″)
M14 - M20
(9/16″-3/4″)
M10 - M16
(3/8″-5/8″)
Rahlo M12 - M20
(1/2″-3/4″)
M10 - M16
(3/8″-5/8″)
M12 - M20
(1/2″-3/4″)
M10 - M16
(3/8″-5/8″)
M12 - M16
(1/2″-5/8″)
M10 - M12
(3/8″-1/2″)
MONTAŽA
POZOR: Pred vsako izvedbo dela na orodju se
prepričajte, da je le to izključeno in da je akumula-
torska baterija odstranjena.
Izbira pravega udarnega nastavka
Vednouporabljajteudarninastavekustreznevelikosti
za sornike in matice. Nepravilna velikost udarnega
nastavkabopovzročilanenatančeninneskladenpritr-
dilni moment in/ali poškodbe sornika ali matice.
Nameščanje ali odstranjevanje
udarnega nastavka
Samo za model DTW1001,DTW1002 (dodatna
oprema)
POZOR: Pred namestitvijo udarnega nastavka
se prepričajte, da udarni nastavek in del za name-
ščanje nista poškodovana.
Ташев-Галвинг ООД
www.tashev-galving.com

18 SLOVENŠČINA
Za udarni nastavek brez O-obroča in
zatiča
►Sl.9: 1. Udarni nastavek 2. Kvadratni pogon
Poravnajtekvadratnideludarneganastavkaskvadra-
tnim pogonom in potisnite udarni nastavek na kvadratni
pogon,dasezaskoči.Čejetreba,garahloudarite.
Čeželiteodstranitiudarninastavek,gaenostavno
povlecite s pogona.
Za udarni nastavek z O-obročem in
zatičem
Samo za model DTW1001
►Sl.10: 1. Udarni nastavek 2.O-obroč3.Zatič
PremakniteO-obročizutoravudarnemnastavku
inodstranitezatičizudarneganastavka.Namestite
udarninastaveknakvadratnipogon,takodajeluknja
vudarnemnastavkuporavnanazluknjovkvadratnem
pogonu.
Vstavitezatičskoziluknjivudarnemnastavkuin
kvadratnempogonu.NatonamestiteO-obročnazajv
prvotnipoložajvutoruudarneganastavka,dazadrži
zatič.
Zaodstranjevanjeudarneganastavkaizveditepostopke
namestitve v obratnem vrstnem redu.
Nameščanje ali odstranjevanje
vrtalnega nastavka/adapterja
nastavka
Samo za model DTW800 (dodatna oprema)
►Sl.11
A = 11,2 mm
Uporabljajtelenaslikiprikazanvrtalninastavek/adapter
nastavka.Neuporabljajtedrugihvrtalnihnastavkov/
adapterjevnastavka.
►Sl.12: 1. Vrtalni nastavek 2.Zaporniobroč
Za namestitev vrtalnega nastavka povlecite zaporni
obročvsmeripuščiceinvanjdokoncapotisnitevrtalni
nastavek.
Spustitezaporniobroč,dasevrtalninastavekzaskoči.
Za odstranitev vrtalnega nastavka povlecite zaporni
obročvsmeripuščiceinizvlecitevrtalninastavek.
OPOMBA:Čevrtalninastavekvobročnivstavljen
dovoljgloboko,setanebovrnilvprvotnipoložaj
invrtalninastaveknebopravilnozaskočen.Vtem
primeruposkušajtevrtalninastavekvstavitiznova,
kotjeopisanozgoraj.
OPOMBA: Ko namestite vrtalni nastavek, se prepri-
čajte,dajetrdnozaskočen.Čegalahkoizvlečete,ne
uporabljajteorodja.
Obroč
Samo za model DTW800
►Sl.13: 1. Nosilec 2.Obroč3.Vijaki
Obročjepriročenzaobešanjeorodjazdvigalom.
Najprejnapeljitevrvskoziobroč.Natopotegniteorodje
v zrak z dvigalom.
POZOR: Pred uporabo obroča se vedno
prepričajte, da sta nosilec in obroč pritrjena in
nepoškodovana.
Nameščanje kavlja
►Sl.14: 1. Vdolbina 2.Kavelj3.Vijak
Kaveljjepriročenpripomočekzazačasnoobešanje
orodja.Namestitegalahkonakaterokolistranorodja.
Kaveljvstavitevutornalevialidesnistraniohišja
orodjaingaprivijtezdvemavijakoma.Odstranitega
tako,daodvijetevijakaingaizvlečete.
UPRAVLJANJE
POZOR: Akumulatorsko baterijo vedno vsta-
vite do konca, tako da se zaskoči.Čejenazgornji
stranigumbavidenrdečindikator,pomeni,dabaterija
niustreznozaskočena.Vstavitejodokonca,takoda
rdečegaindikatorjanimogočevideti.Vnasprotnem
primeruselahkoakumulatorskabaterijasnamez
orodjainpoškodujevasaliosebevneposrednibližini.
►Sl.15
Trdnodržiteorodjeinnamestiteudarninastaveknad
sornikalimatico.Vključiteorodjeinprivijajteustrezno
dolgo.
Pravilnipritrdilnimomentselahkorazlikuje,odvisnood
vrste in velikosti sornika, materiala obdelovanca, ki ga
bostepritrdili,itn.Razmerjemedpritrdilnimmomentom
inčasompritrjevanjajeprikazanonaslikah.
Ташев-Галвинг ООД
www.tashev-galving.com

19 SLOVENŠČINA
Model DTW1001
Ustrezen zatezni moment za standardni sornik
1
2
N•m
(kgf•cm)
800
600
400
200
(2040)
(4080)
(6120)
(8160)
1023
0
M24(1″)
M24(1″)
M30(1-1/4″)
M30(1-1/4″)
1.Časprivijanja(s)2. Zatezni moment
Ustrezen zatezni moment za visoko natezni sornik
1023456
0
800
600
400
200
(2040)
(4080)
(6120)
(8160)
N•m
(kgf•cm)
2
1
M24(1″)
M24(1″)
M22(7/8″)
M22(7/8″)
M20(3/4″)
M20(3/4″)
1.Časprivijanja(s)2. Zatezni moment
Model DTW1002
Ustrezen zatezni moment za standardni sornik
1
2
N•m
(kgf•cm)
800
600
400
200
(2040)
(4080)
(6120)
(8160)
1023
0
M24(1″)
M24(1″)
M30(1-1/4″)
M30(1-1/4″)
1.Časprivijanja(s)2. Zatezni moment
Ustrezen zatezni moment za visoko natezni sornik
1023456
0
800
600
400
200
(2040)
(4080)
(6120)
(8160)
N•m
(kgf•cm)
2
1
M24(1″)
M24(1″)
M22(7/8″)
M22(7/8″)
M20(3/4″)
M20(3/4″)
1.Časprivijanja(s)2. Zatezni moment
Ташев-Галвинг ООД
www.tashev-galving.com

20 SLOVENŠČINA
Model DTW800
Ustrezen zatezni moment za standardni sornik
N•m
(kgf•cm)
1
1
02
3
0
400
200
(2040)
(4080)
M20(3/4″)
M20(3/4″)
M24(1″)
M24(1″)
2
1.Časprivijanja(s)2. Zatezni moment
Ustrezen zatezni moment za visoko natezni sornik
1023456
0
800
600
400
200
(2040)
(4080)
(6120)
(8160)
N•m
(kgf•cm)
1
2
M22(7/8″)
M20(3/4″)
M20(3/4″)
M16(5/8″)
M16(5/8″)
M22(7/8″)
1.Časprivijanja(s)2. Zatezni moment
OPOMBA:Držiteorodjeusmerjenonaravnostproti
sorniku ali matici.
OPOMBA:
Čezmernipritrdilnimomentlahkopoškodujesornik/
maticoaliudarninastavek.Predenzačnetezdelom,vednoizvedite
preizkus,dadoločiteustrezenčaspritrjevanjasornikaalimatice.
OPOMBA:Čeorodjeuporabljatebrezprekinitvevse
doizpraznitveakumulatorja,gaizključiteza15minut,
predennadaljujetedelozdrugimakumulatorjem.
Napritrdilnimomentvplivavelikorazličnihdejavnikov,
vključnoznaslednjimi.Poprivijanjuvednopreverite
navorzmomentnimključem.
1. Kadarseakumulatorizprazni,seznižanapetostin
s tem tudi zatezni moment.
2. Udarni nastavek
• Uporaba nepravilnega udarnega nastavka
bopovzročilazmanjšanjepritrdilnega
momenta.
• Obrabljenudarninastavek(obrabašestro-
begaalikvadratnegakonca)bopovzročil
zmanjšanjepritrdilnegamomenta.
3. Vijak
• Čepravstakoličniknavorainvrstavijaka
enaka, se bo pravilni zatezni moment razli-
kovalgledenapremervijaka.
• Čepravsopremerivijakovenaki,sebo
pravilni zatezni moment razlikoval glede na
količniknavora,vrstoindolžinovijaka.
4. Uporabauniverzalnegaspojnikaalipodaljška
nekolikozmanjšasilepriprivijanjuzudarnimvijač-
nikom.Prilagoditesilotako,daprivijatedaljčasa.
5. Načindržanjaorodjaalipoložajmateriala,kiga
boste pritrdili, bo vplival na navor.
6. Zateznimomentsezmanjšatudivprimeru,če
vijakprivijateznizkimštevilomvrtljajev.
VZDRŽEVANJE
POZOR: Preden se lotite pregledovanja ali
vzdrževanja orodja, se vedno prepričajte, da
je orodje izklopljeno in akumulatorska baterija
odstranjena.
OBVESTILO: Nikoli ne uporabljajte bencina,
razredčila, alkohola ali podobnega sredstva. V
tem primeru se lahko orodje razbarva ali defor-
mira oziroma lahko nastanejo razpoke.
VARNOinZANESLJIVOdelovanjetegaizdelkabo
zagotovljenole,čebostepopravila,vzdrževanjein
nastavitveprepustilipooblaščenemuservisuzaorodja
Makitaalitovarniškemuosebju,kivgrajujeizključno
originalne nadomestne dele.
Ташев-Галвинг ООД
www.tashev-galving.com