marsden BAS-200 User manual

USER MANUAL
BAS-200
Please take the time to read these
instructions before starting
to use the scales
Page 1

Technical Specifications
Working temperature: 10°C to 40°C
Environmental humidity: <80%
Max capacity: 20kg
Graduation: 5g
Power supply: 4 x AA batteries
Background colour: Blue backlight
Low power: Lo
Error of indication: Err
Unit change: kg or lb
Memory function: Optionally save and recall weighing value
Turn off automatically
Overload: o_Ld
Keys’ Function
ON/TARE
Press the key to power on the scale. To zero the scale, press the
key again to clear the display and “zero” icon will show in the left
corner of the LCD. To turn off the scales press and hold the key for
about 3 seconds.
MODE
Weighing units exchange key. Press the key to select kg and lb in
turn. An icon denoting kg or lb is on the right side of the LCD
display.
MEM
When the display “0.000”, press the key to recall the previous
weight saved in the memory. A weight is saved by pressing the
key when it is stable.
Operation
Press “ON/TARE” key to start the scale until “0.000” appears.
Place baby on the tray, the weight will flash after a few seconds. If the baby remains
on the tray after the weight is shown, the weight will continue to flash for 5 minutes
and then turn off automatically.
If the baby is removed from the tray immediately after the weight has flashed, the
scale will return to “0.000” and then turn off automatically within 5 minutes if not
used again.
To recall the saved weight, press the “MEM” key while the scale is in the “0.000”
position.
Page 2

Warnings
The scales should be used on a hard flat surface.
Replace batteries immediately when the scale displays “L o”
Keep the scale clean
Remove the batteries if the scale is not going to be used for a long period.
Weigh the baby in the centre of the tray.
Never overload the scale (23kg)
Page 3