MASSEY FERGUSON Combines MF 7340 User manual

Workshop Service Manual
Combines
MF 7340
Breganze
AGCO S.p.A. - Via F. Laverda, 15/17 - 36042
BREGANZE (VI) – Italy.
© AGCO 2019
February 2019
LA327509010M_7340_EN
EME
English

Find manuals at https://best-manuals.com

TABLE OF CONTENT
Preface 1
General Information - 00 2
Engine - 10 3
Drive transmission - 14 4
Transmission - 21 5
Front drive axle - 25 6
Hydrostatic transmission - 29 7
Brakes - 33 8
Hydraulic system - 35 9
Steering - 41 10
Axles and wheels - 44 11
Cab air conditioning system - 50 12
Electrical system - 55 13
Attachments/Headers - 58 14
Product feeding - 60 15
Threshing - 66 16
Separation - 72 17
Straw chopper - 73 18
Cleaning - 74 19
Grain tank - 80 20
Conversion 21
.
Find manuals at https://best-manuals.com

1 Preface
1.1 Introductory notes ..................................................... 1-3
1.2 Important warnings .................................................... 1-4
1.3 Identification number ...................................................1-5
Table of contents
Combines 1-1
LA327509010M_7340_EN
Find manuals at https://best-manuals.com

Table of contents
1-2 Combines
LA327509010M_7340_EN
Find manuals at https://best-manuals.com

1.1 Introductory notes
•This manual is divided into sections numbered with two-digit numbers, each section having
independent page numbering. For quick reference, these sections have the same identification number
and description as the relevant Flat Time Rate Manual.
• The subjects covered and the information sought can easily be found using the index on the following
pages.
• The information in this manual was updated on the date shown on the booklet. As AGCO is constantly
improving its product range, some information may not be updated due to modifications made for
technical or commercial reasons as well as for compliance with legal requirements in the various
countries. If there are any inconsistencies, contact our AGCO Sales and Service Networks.
GUID-645192D5-7F9B-4756-9D27-32FAF1460CFA [V1]
1. Preface
Combines 1-3
LA327509010M_7340_EN
Find manuals at https://best-manuals.com

1.2 Important warnings
•Warning: Some of the models listed in this manual are not marketed in your country. For more
details, contact your dealer.
• All repair and maintenance work listed in this manual must be carried out exclusively by the AGCO
Service Network, in strict compliance with the instructions provided and using, where necessary, the
special tools required.
• Anybody who carries out the above operations without scrupulously complying with the instructions
shall be held personally liable for any damage caused as a result of their actions.
• The Manufacturer and all the organizations in its distribution chain, including (without limitation) national,
regional or local dealers, reject any responsibility for damage due to the abnormal behavior of parts
and/or components not approved by the Manufacturer, including those used for the servicing or repair of
the product manufactured or marketed by the Manufacturer. In any case, no warranty of any type is
issued or imposed concerning the product manufactured or marketed by the Manufacturer for damage
due to abnormal behavior of parts and/or components not approved by the Manufacturer.
LITERARY AND ARTISTIC PROPERTY OF AGCO CORPORATION
Reproduction of text and illustrations, even partially, is prohibited
PRINTED IN ITALY
GUID-6A968CF6-57C5-478A-8E25-994687984E8C [V1]
1. Preface
1-4 Combines
LA327509010M_7340_EN
Find manuals at https://best-manuals.com

1.3 Identification number
Model Model identification code
MF 7340 X5C
Description of the combine harvester identification number - Type 1
a b c
E.G.:*5512 *
5512 10001 *
d
a= Technical type
d= Identification number: 551210001
It is made up of two parts:
• Part 1 (b), made up of 4 digits "5512", identifies the technical type (machine model).
• Part 2 (c), made up of 5 digits "10001", which increase in numerical order of production and identify the
sequential number of the produced machine model.
*5512*55120.. ...* For the MF 7340 model
Description of the combine harvester identification number - Type 2
a b c d e f g
E.G.: *ZN2 0 5512 X 0 3 010001 *
h
h= Identification number: ZN205512X03010001 is made up of 7 parts:
aManufacturer code: ZN2 = AGCO S.P.A.
bNot used.
cTechnical type.
dRandom letter generated automatically.
eNot used.
fProduction site code: 3 = Breganze.
gSequential number.
L-type grain header identification number
723.. ... For the M 4.20 model
733.. ... For the M 4.80 model
743.. ... For the M 5.40 model
753.. ... For the M 6.00 model
GUID-562AFA16-657B-45E8-9F56-2F9680CD65CF [V1]
1. Preface
Combines 1-5
LA327509010M_7340_EN
Find manuals at https://best-manuals.com

1. Preface
1-6 Combines
LA327509010M_7340_EN
Find manuals at https://best-manuals.com

2 General Information - 00
2.1 General instructions .................................................... 2-3
2.2 Safety precautions ..................................................... 2-5
2.3 Appropriate use ........................................................ 2-9
2.4 Technical specifications ................................................ 2-10
2.4.1 Weight .......................................................... 2-10
2.4.2 Feeding unit ...................................................... 2-10
2.4.3 Threshing sys. ..................................................... 2-11
2.4.4 Cleaning unit ......................................................2-13
2.4.5 Grain tank ........................................................ 2-14
2.4.6 Hydraulic system ...................................................2-14
2.4.7 Hydrostatic system ................................................. 2-15
2.4.8 Engine .......................................................... 2-15
2.4.9 Electrical components ............................................... 2-16
2.4.10 Transmission ......................................................2-16
2.5 Lubrication ............................................................2-17
2.6 Service intervals .......................................................2-18
2.7 Combine dimensions .................................................. 2-21
2.7.1 Clearance between unloading auger and table ............................. 2-23
2.7.2 Clearance between unloading auger and ground ............................ 2-23
2.8 Tracks with runners ................................................... 2-25
2.9 Tire equipment- front axle ............................................. 2-26
2.10 Tire equipment - rear axle .............................................. 2-27
2.11 Tire equipment - Version with half-tracks on front axle ................... 2-28
2.12 Drive trains – left-hand side ............................................ 2-29
2.12.1 Table drive belt (1) .................................................. 2-30
2.12.2 Belt drive for main crop elevator shuttle (2) ................................ 2-30
2.12.3 Main transmission drive belt (3) ........................................ 2-31
2.12.4 Clean grain and returns augers drive belts (4) .............................. 2-31
2.12.5 Straw walker drive belt (5) ............................................ 2-31
2.12.6 Cha spreader transmission belt (6) ..................................... 2-32
2.12.7 Feeder drive belt (7) ................................................ 2-32
2.12.8 Grain unloading drive chain (8) ......................................... 2-33
2.12.9 Threshing unit drive belt (9) ........................................... 2-33
2.12.10 Unloading-auger drive belt (10) ......................................... 2-34
2.12.11 Belt drive for hydrostatic pump (11) ..................................... 2-35
2.12.12 Straw chopper counter drive belt (12) .................................... 2-35
2.12.13 Straw chopper transmission belt drive (13) ................................ 2-36
2.12.14 Drive chain for feed auger (14) ......................................... 2-36
2.12.15 Cutting blade wobble box drive belt (15) .................................. 2-37
2.12.16 Transmission chain for reel (16) ........................................ 2-37
2.12.17 Reel drive chain (17) ................................................ 2-38
2.13 Drive trains – right-hand side ........................................... 2-39
2.13.1 Radiator fan drive belt (1) ............................................. 2-40
2.13.2 Drive belt for alternator and engine coolant pump (2) .........................2-40
2.13.3 Rotary-screen drive belt (3) ........................................... 2-41
2.13.4 Return rotary-screen drive belt (4) ...................................... 2-41
2.13.5 Dust aspirator drive belt (5) ........................................... 2-42
2.13.6 Tank filling auger control (upper) (6) ..................................... 2-43
Table of contents
Combines 2-1
LA327509010M_7340_EN
Find manuals at https://best-manuals.com