
Thank you for choosing a product from master care A/S.
We recommend reading the user manual thoroughly before using the
product (-s).
The information in this user manual applies to the shown products
provided that the products have not been modied or customized
and that the products have been used as recommended in this user
manual.
If the costumer changes, repairs or uses the product in other combi-
nations than recommended by master care A/S the CE-approval no
longer applies and the guarantee becomes void.
In case of doubt, contact master care A/S or our distributor in your
area.
MDR (EU) 2017/745:
Products in this user manual are CE-approved and follows the harmo-
nized standards. This means that the products are in compliance with
the essential health and safety directives. The product(-s) comply with
the standards in the Medical Device Regulation MDR (EU) 2017/745 –
Class 1.
The intended use of the product/-s:
The product can be used to turn a patient to the side or to prone posi-
tion. The slippery surface on the backside can be used directly on the
top of the treatment/operating table or combined with a sliding mate-
rial to reduce friction. Should be used in combination with a hoist.
Correct use of the product:
The Master Turner OP can be used e.g. on operating tables or in other
situations where the user with disabilities are turned to the side or to
prone position.
Warning:
If the surface isn’t slippery a piece of sliding material is recommended
between the table and the Master Turner OP to uphold a sound and
healthy work environment.
Risk assessment:
Always make a risk assessment and a functional assessment of the
user prior to using the product. This way using the product for trans-
ferring or moving a user, is ergonomic and legally sound.
Knowledge of the product/transferring:
It is important that the user of the product has been properly instruct-
ed in the use of the product and has read the user manual thoroughly
prior to using the product.
master care A/S and our distributors provide education in the use of
products and on our website all user manuals can be found.
Life span:
The expected life span of products with nylon sliding material with
daily wear and tear and washing averagely is 1-3 years. The products
life span depends on the use, users load, washing and drying tempera-
tures and how often it is washed and dried.
Make visual inspections frequently and preferably before every use.
Products with insufcient friction reduction, defect seams, broken
material or other deciencies must be discarded. This way you will
always keep a sound and healthy work environment for both helper
and user.
Guarantee:
master care A/S provide a 2-year guarantee covering material defects
and manufacturing defects if the product has been used correctly.
Unintended events and injuries when misusing the products:
Unintended events must always be reported to the appropriate Na-
tional Authority and to master care A/S or the distributor in the current
country.
master care A/S and our distributors take no responsibility for per-
sonal injuries or product damages if the product(-s) have been used
in contravention of the by the manufacturer recommended intended
purpose or proper use of the product.