Matt Blatt CARRIE ARMCHAIR User manual

CARRIE ARMCHAIR (NAVY VELVET)
MBCARRACHNA

SAFETY & WARNINGS
•Read these instructions carefully and keep for future reference
•Refer to parts inventory for guidance, and ensure you have all pieces before
starting
•When assembling, place all parts on a soft, clean, and flat surface such as a
carpet to prevent scratches
•Two people required to orientate the sofa
•Do not use power tools when assembling

COMPONENTS
Before you begin to assemble your new piece of furniture, please check to ensure that
all hardware and parts have been supplied. This page lists all contents included in the
carton(s).
A
1x Chair Base
B
4x Legs
C
8x Bolt
D
8x Locking Washer
E
8x Flat Washer
F
1x Hex Key

ASSEMBLY
To assemble your armchair:
1. Remove the legs from within the base of the chair.
2. Insert the legs into the chair base.
3. Insert the Bolts (C), the Locking Washers (D) and the Flat Washers (E) into the
legs.
4. Tighten loosely by hand at first, then fasten securely with the included Hex Key
(F).
Package Containing Legs
F
C
D
E
B

MAINTENANCE AND CARE
Periodically check and re-tighten any fasteners.
Avoid direct sunlight.
Treat spills and stains as soon as they occur. Gently scrape any soil or mop any liquid
from the surface of the fabric, apply cleaning agents suitable for furniture strictly
according to their instructions to remove the residue of the spill.
Do not saturate the fabric or interior with water or other cleaning liquids.
The armchair ay be spot cleaned with dry cleaning solvent.
Pilling can occur occasionally as a result of normal daily wear and should not be
considered as a fault. Fibre pills can be removed by commonly available pill removing
tools.

NOTES

NEED MORE INFORMATION?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For any additional assistance you may require,
head online to help.mattblatt.com.au