Matt Blatt KENNETH DAHL DIXIE MBKENDDRCGA User manual

KENNETH DAHL
DIXIE ROCKING CHAIR
MBKENDDRCGA, MBKENDDRCMA

COMPONENTS
1
Chair Body
2
Leg Frame A
3
Leg Frame B
4Wooden Feet
(x2)
535mm M8
Screws (x4)
620mm M8
Screws (x6)
715mm M4
Screws (x2)
8Φ9xΦ13x3 Spring
Washers (x4)
9 Φ9xΦ16x2
Washers (x4) 10 Allen Key #4 11 Allen Key #5

ASSEMBLY
Step 1
Using the #5 Allen key [11], attach the Leg Frames [2, 3] to the Chair Body [1] with the
20mm screws [6].
Then, using the #4 Allen key [10], connect the Leg Frames [2, 3] together with the 15mm
screws [7].
Do not overtighten. Tighten to 50%, and retighten once all of assembly is complete.

Step 2
Using the #5 Allen key [11], connect the wooden feet [4] to the leg assembly with the
35mm screws [5], ensuring the washers [9] and spring washers [8] are in place as shown
in the below illustration.
Do not overtighten.

Step 3
Return to all of the screws and tighten to 100%.

Complete!

NEED MORE INFORMATION?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.mattblatt.com.au