Matt Blatt DUBLIN MBDUBL2STBA User manual

DUBLIN 2PC SET STOOLS
MBDUBL2STBA, MBDUBL2STCA & MBDUBL2STGA

COMPONENTS
1. Seat
2. Leg frame
(part 1)
3. Leg frame
(part 2)
4. Footrest
FITTINGS
A. M8x20mm Bolt
B. M6x20mm Bolts (x4)
C. M6x25mm Bolts (x4)
D. Flat washers (x5)
E. 5mm Allen key
F. 4mm Allen key

ASSEMBLY
Step 1:
• Secure both the leg frames (2)(3) together using an M8x20 bolt (A) and flat
washer (D).
• Using the 5mm Allen key (E), tighten the bolts to approximately 80%. Do not
fully tighten.

Step 2:
• Attach the footrest (4) to both the leg frames (2)(3) using x4 M6x25 bolts (C).
• Using the 4mm Allen key (F), tighten the bolts to approximately 80%. Do not
fully tighten.
Note: Ensure the arrow on the footrest is pointing in the direction shown below.

Step 3:
• Attach the assembled legs (2)(3) to the underside of the seat (1) using the x4
M6x20 bolts (B) and x4 flat washers (D).
• Using the 5mm Allen key (E), tighten the bolts to approximately 80%. Do not
fully tighten.
Note: Ensure the arrow on the footrest is pointing towards the front of the seat.
Step 4:
Press down on the seat and use the Allen keys to fully tighten the bolts.

Step 5:
Complete!

NEED MORE INFORMATION?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.mattblatt.com.au