Matt Blatt HORSTEN DINING BENCH MBHORTDBBWA User manual

HORSTEN DINING BENCH
MBHORTDBBWA

SAFETY & WARNINGS
•Please do not discard any of the packing until you have checked all parts and
components are present. If there is any foam packing, double check that no
additional hardware/fittings are lodged within it before discarding.
•Before you begin to ensure to assemble your new piece of furniture, please
check to ensure that all part have been supplied.
•Follow instruction closely as deviation from may void your warranty and
present a possible safety risk.
•It is recommended that assembly is done on a soft surface like carpet or a
blanket to avoid any damage.
•Periodically check and re-tighten any fasteners. Wipe down all surfaces
regularly with a clean cloth. Do not clean any surface with harsh abrasives or
chemicals.

COMPONENTS
1. Seat Top 2. Right Leg
(x2)
3. Left Leg
(x2)
4. Centre Stretcher 5. Cushion
6. Hex Head Screws
(x4)
7. Spring Washer
(x4)
8. Flat Washer
(x4)
9. Spanner 10. Screws
(x4)

ASSEMBLY
Step 1: Using the Spanner [9], attach the Right and Left Legs [2, 3] to the seat top [1]
with Hex head Screws [6]. Do not fully tighten the screws.

Step 2: Attach Centre Stretcher [4] to the Right and Left Legs [2, 3] with CSK Screw [10].
Following step 2, fully tighten all screws from steps 1 and 2.
Step 3: Attach the Cushion [5] to the Seat Top and strap the supplied Velcro under the
seat top.

Assembly complete!

NEED MORE INFORMATION?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.mattblatt.com.au