Matt Blatt MBBILLIDTLA User manual

BILLIE DINING TABLE LARGE
MBBILLIDTLA

SAFETY & WARNINGS
Care Information:
•Periodically check and re-tighten any fasteners. Dust weekly using a soft cloth.
•Do not use harsh abrasives, chemicals or polishes containing silicone.
•Avoid direct sunlight as this will cause the timber to change colour.
•It is important to remove moist substances immediately. Use coasters,
placemats and table runners to assist in prolonging the life of your product.
•This item has as distressed appearance which means that cracks, chips and
splitting is part of the design of the piece. No two pieces will be exactly the
same.

COMPONENTS
1Dining Top
2Dining Centre Ply
3Dining Base Leg (x2)
470MM M8 Allen Bolt (x4)
520MM M8 Washer (x4)
620MM M8 Bolts (x16)
725MM M8 Washer (x16)
8Allen Key
912MM 13M Spanner

ASSEMBLY
Step 1:
Using the Allen Key, attach the Centre Ply to the Legs of Dining Table using the 70mm
bolt (4) and 20mm washers (5). Do not overtighten, only tighten bolts to 80%.

Step 2:
Fix the complete Leg set to the Dining Table Top using the 20mm bolts (6) and 25mm
washers (7). The 12mm spanner (9) will be required to tighten the bolts. Do not
overtighten, only tighten bolts to 80%.

Step 3:
Return to tighten all bolts.
Warning: Two people may be required to lift this table. Do not attempt to lift by
yourself.
Assembly complete!

NEED MORE INFORMATION?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.mattblatt.com.au