Matt Blatt NEWPORT DINING TABLE MBNEWPTDTOA User manual

NEWPORT DINING TABLE
MBNEWPTDTOA & MBNEWPTDTWA

SAFETY & WARNINGS
•Please do not discard any of the packing until you have checked all parts and
components are present. If there is any foam packing, double check that no
additional hardware/fittings are lodged within it before discarding.
•Before you begin to ensure to assemble your new piece of furniture, please
check to ensure that all part have been supplied.
•Follow instruction closely as deviation from may void your warranty and
present a possible safety risk.
•It is recommended that assembly is done on a soft surface like carpet or a
blanket to avoid any damage.
•Periodically check and re-tighten any fasteners. Wipe down all surfaces
regularly with a clean cloth. Do not clean any surface with harsh abrasives or
chemicals.

COMPONENTS
1Table-Top 2Legs (x4)
3Hex Head Screws (x4) 4 Spring Washer (x4)
5Flat Washer (x4) 6 Spanner

ASSEMBLY
Using the spanner, attach the Legs to the tabletop with hex-head screws, spring
washers, and washers in place. Fully tighten all screws.

Assembly complete!

NOTES

NEED MORE INFORMATION?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.mattblatt.com.au