Matt Blatt Recap Coffee Table (Oak) User manual

RECAP COFFEE TABLE (OAK)
MBRECAPCTOA

COMPONENTS
1Cabinet body
2 Leg (x4)
3 Bolt (x12)
4 Allen key (x2)
5 Felt pad (x4)

ASSEMBLY
Step 1:
• Attach the legs (2) to the underside of the body (1) using the bolts (4).
• Attach the felt pads (5) to the bottom of the legs (2).

CLEANING & CARE
To ensure that you enjoy many years of life from your furniture, it is imperative the
correct care and maintenance be taken. It is recommended to use furniture oil on all
wooden surfaces. For best results follow the instructions stated on your chosen
product.
Your furniture has already been oiled from the factory. The surface should be treated
every three months.
How to apply oil to the furniture
• Apply a generous amount of furniture oil using a clean cloth. The underside of
the tabletops must be treated along with the top side. Take care not to drop
oil on the floor.
• After 15 minutes, following the direction of the wood grain, polish using a fine
sandpaper sponge or sandpaper (150 grit).
• Wipe off any remaining oil with a clean, dry cloth.
• The lacquered MDF sides of the cabinet should not oiled. Instead, clean using
a clean, dry cloth.
General care
• Clean the surface using a clean, dry cloth. Do not use detergents.
• Ensure coloured stains like red wine are wiped off immediately.
• Small stains and marks can be removed using fine sandpaper (180-220 grit).
• Avoid placing in high humidity environments.
• Do not place the item close to open flames and other sources of heat.
• Legs must be re-fastened occasionally.

NOTE

NEED MORE INFORMATION?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.mattblatt.com.au.