Mattel BOOM RAILSTINGER CJF19 User manual

A. Load darts into barrel and storage.
B. Pull slide back to fire!
C. Push slide forward to reset.
A. Hold button and fold blaster handle.
B. Attach to blaster for extra firepower.
TO FIRE
2
ATTACH TO BLASTER
3
CONTENTS
1WARNING: Do not aim at eyes or face. Only use projectiles supplied
with this toy. Do not fire at point blank range.
TO AVOID INJURY: Do not modify rounds, darts, or dart blaster.
Always wear appropriate eye-wear, sold separately.
1100265984_G1
CJF19_DOM
GAUNTLET
INSTRUCTIONS
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697.
Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria.
3121. Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3
Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone], Fax: [phone].
RAILSTINGER™
14
23
ATTACHING TARGETS
Do not stick target to walls
or furniture as it may cause
damage to the surface.
Peel backing off target before sticking
it to surface.
REMOVING DARTS
4CLEANING DARTS
6
5
REPLACING TARGETS
& SHIELDS
7
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK™ REFILLS.
Each sold separately, subject to availability.
X
Dust, dirt, and other debris can cause
darts to lose their adhesiveness.
NOTE: Dry darts before using again.
REMOVE DARTS
TECHNOLOGY !
IMMEDIATELY
TO MAINTAIN SMART STICK™
Keep one hand pressed on target, hold
dart by the tip and gently peel dart off.
To clean darts, rinse darts’ tips with
tap water or use tape to remove
excess debris.
x 2
BARRELSTORAGE
a
b
Only works with BOOMco.TM railmount blasters.
For best performance, make sure all other rail accessories are removed.
Slide off to remove.
Railmount blaster not included, sold separately, subject to availability.
Please keep these instructions for future reference as they contain important information.

A. Load darts into barrel and storage.
B. Pull slide back to fire!
C. Push slide forward to reset.
A. Hold button and fold blaster handle.
B. Attach to blaster for extra firepower.
TO FIRE
2
ATTACH TO BLASTER
3
CONTENTS
1WARNING: Do not aim at eyes or face. Only use projectiles supplied
with this toy. Do not fire at point blank range.
TO AVOID INJURY: Do not modify rounds, darts, or dart blaster.
Always wear appropriate eye-wear, sold separately.
1100265984_G1
CJF19_DOM
GAUNTLET
INSTRUCTIONS
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697.
Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria.
3121. Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour
City, Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3
Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone], Fax: [phone].
RAILSTINGER™
14
23
ATTACHING TARGETS
Do not stick target to walls
or furniture as it may cause
damage to the surface.
Peel backing off target before sticking
it to surface.
REMOVING DARTS
4CLEANING DARTS
6
5
REPLACING TARGETS
& SHIELDS
7
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK™ REFILLS.
Each sold separately, subject to availability.
X
Dust, dirt, and other debris can cause
darts to lose their adhesiveness.
NOTE: Dry darts before using again.
REMOVE DARTS
TECHNOLOGY !
IMMEDIATELY
TO MAINTAIN SMART STICK™
Keep one hand pressed on target, hold
dart by the tip and gently peel dart off.
To clean darts, rinse darts’ tips with
tap water or use tape to remove
excess debris.
x 2
BARRELSTORAGE
a
b
Only works with BOOMco.TM railmount blasters.
For best performance, make sure all other rail accessories are removed.
Slide off to remove.
Railmount blaster not included, sold separately, subject to availability.
Please keep these instructions for future reference as they contain important information.