MD SPORTS FS058Y21006 User manual

MODEL
FS058Y21006
Assembly Instructions Menards
www.medalsports.com877-472-4296
MODEL
FS058Y21006

This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited
warranty period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer.
The only exceptions to the warranty include mainframes, table tops, playing surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental
damage or neglect.
This Limited Warranty gives you specific legal rights and you may also have other rights vary from one State (province) to
another.
A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For all
requests for warranty service, please feel free to contact our Consumer Service Department.
Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Medal Sports,
cannot handle the product which is out of product’s limited warranty since we only provide available parts. Thank you!
PLEASE CONTACT US BEFORE RETURNING THE PRODUCT TO THE STORE!
MD SPORTS
877-472-4296
www.medalsports.com
Customer Service Toll Free
Please Contact
Mon.-Fri., 9:00 a.m. to 5:00 p.m. EST
For additional resources and Frequently Asked Questions, please visit us at
DO NOT RETURN TO STORE
WE ARE READY TO HELP
English
LIMITED 90 DAYS WARRANTY
FS058Y21006 1(Continued on the next page) www.medalsports.com

This product is intended for INDOOR use only.
Please do not sit, climb or lean on the product.
Please do not drag the product when moving it in order to avoid damaging the legs.
Please only use furniture polish spray to clean the exterior surfaces of the product.
This is not a children's toy, adult supervision is required for children playing this game.
1.
2.
3.
4.
5.
- Not Included
- Not Included
- Included
RECOMMENDED
IMPORTANT NOTICE
Adult assembly required.
CHOKING HAZARD - This item contains small parts and small balls. Not suitable for children under 3 years.
WARNING
Phillips Screwdriver
Standard (Flat Head Screwdriver)
Allen Key
Electric Screwdrivers may be helpful during assembly; however, please set a low
torque and use extreme caution.
X2
At least 2 adults needed No children in assembly
area
Keep away from pets in
assembly area
Do not use or keep
product outdoors. For
indoor use only. No
wet/humid conditions.
Power Tools: Set to Low Torque
High Torque Over Tightened
FS058Y21006 2(Continued on the next page) www.medalsports.com
English
TOOLS REQUIRED
FS058Y21006 2(Continued on the next page) www.medalsports.com

English
PARTS IDENTIFIER
FS058Y21006 3(Continued on the next page) www.medalsports.com
PART NUMBER FIG. NUMBER
QUANTITY
PART
PART NAME Side Apron
1
x2
FOR FIG. 2
2
x2
FOR FIG. 6
End Apron
3
x2
FOR FIG. 4
Support Brace
4
x1
FOR FIG. 3
Playfield
5
x2
FOR FIG. 5
Right Leg
6
x2
FOR FIG. 5
Leg Panel
7
x4
FOR FIG. 5
Left Leg
8
x2
FOR FIG. 1
Goal End Board
9
x2
FOR FIG. 1
End Top Rail
10
x2
FOR FIG. 9
Goal Box - Bottom
11
x14
FOR FIG. 1, 4, 6
“L” Bracket
12
x4
FOR FIG. 5
Leg Base
13
x2
FOR FIG. 14
Slide Scorer
14
x4
FOR FIG. 9
Leg Leveler
15
x2
FOR FIG. 11
5-Hole Rod
16
x4
FOR FIG. 11
3-Hole Rod
17
x2
FOR FIG. 11
2-Hole Rod
20
x16
FOR FIG. 11
Rod Washer
21
x16
FOR FIG. 11
Foam Bumper
25
x2
FOR FIG. 15
Outside Ball Cup
22
x8
FOR FIG. 13
Handle
23
x8
FOR FIG. 13
Rod End Cap
24
x1
FOR FIG. 5
Glue
18
x2
FOR FIG. 10
Playfield Ramp
19
x2
FOR FIG. 9
Goal Box - Top
FOR FIG. 12
26
x13
Player A - Black
27
x13
FOR FIG. 12
Player B -Black
28
x13
FOR FIG. 12
Player C - Black
29
x13
FOR FIG. 12
Player A - Burgundy

ACCESSORIES
HARDWARE
English
PARTS IDENTIFIER
FS058Y21006 4(Continued on the next page) www.medalsports.com
30
x13
FOR FIG. 12 31
x13
FOR FIG. 12
Player B - Burgundy Player C - Burgundy
Soccer ball
33
x2
A2
x68
FOR FIG. 1, 4, 6, 8, 9
4X12mm Round Head Screw
A3
x12
FOR FIG. 2, 14
4X45mm White Zinc Coated Screw
A4
x16
FOR FIG. 5
3x38mm Screw
A6
x16
FOR FIG. 3
3.5x28mm Screw
A7
x2
FOR FIG. 15
4x12mm Flat Head Screw
A8
x24
FOR FIG. 5
3x18mm Screw
A1
x16
FOR FIG. 6, 7
M6x22mm Bolt
x16
FOR FIG. 6, 7
M6 Washer
A5
A9
x1
Allen Key
32
x2
FOR FIG. 15
Inside Ball Cup

BEFORE ASSEMBLY
Find a clean, level place to begin the assembly of your product.
Verify that you have all listed parts as shown on the part list pages. If any parts are missing, call our customer service.
1.
2.
English
PRE-INSTALLED PARTS
FS058Y21006 5(Continued on the next page) www.medalsports.com
P5
x16
FOR FIG. 5
6mm Nut
P6
x26
FOR FIG. 12
Iron Piece
P1
x2
FOR FIG. 6
Ball Return Cover
P2
x2
FOR FIG. 1
Goal Cover
P3
x4
FOR FIG. 5
Square Nut with Screws
P4
x16
FOR FIG. 2
Rod Bushing

English
ASSEMBLY
FS058Y21006 6(Continued on the next page) www.medalsports.com
A2
11
FIG. 1
8
x2
x2
9
x6
11
x24
A2
Pre-installed
x2
P2
P4
8
8
A3
A3
1
1
P2
11
9
8
Note: Drive Screws (A3) to secure the
connections between Side Aprons and
Goal End Boards.
FIG. 2
1
Pre-installed
x16
x2
P4
x8
A3

English
ASSEMBLY
FS058Y21006 7(Continued on the next page) www.medalsports.com
1
FIG. 3
4
x16
x1
A6
FIG. 4
3
x4
x2
11
x16
A2
1
4
A6
11
3
A2
3
31
1
4
4
Note: Playfield graphic
should face down when
assembling.

English
ASSEMBLY
FS058Y21006 8(Continued on the next page) www.medalsports.com
5 6 7
& &
6
12
A4
5
12
A4
6 5
&
7A8
FIG. 5
5
x2
x2
6
Pre-installed
x16
P5
x4
7
x4
12
x16
A4
A8 x24
24 x1
12
P5
6 5
&
24
24
7
Note: Please fold the legs into a V
configuration with the Nuts on the
inside of the V.
Pre-installed
x4
P3
P3

English
ASSEMBLY
FS058Y21006 9(Continued on the next page) www.medalsports.com
FIG. 6
2
P1
A2
11
Wall
6
5
2
2
x2
x2
P1
Pre-installed
x4
11
x8
A1
x8
A2
x8
A5
A9 x1
6
5
A1
A5
Note: Do NOT tighten Bolt (A1) until FIG. 7.
2

English
ASSEMBLY
FS058Y21006 10(Continued on the next page) www.medalsports.com
FIG. 7
x1
A9
x8
x8
FIG. 8
x8
A2
1
A2
2
11
A5 A1
Note: After this step, tighten Bolts (A1).
A1
A5
A2
6
5
6
2
5

Note: Go back and make sure that all connections are tight.
Lift the table off the ground.
Turn the table over.
Place it on all feet at the same time on the ground.
1.
2.
3.
Two strong adults are recommended to turn over the table as shown.
CAUTION
DO NOT LEAN THE
TABLE ON ITS LEGS
DO NOT HOLD THE TABLE
BY THE LEGS
HOLD BY THE
TABLETOP
CABINET
English
ASSEMBLY
FS058Y21006 11(Continued on the next page) www.medalsports.com
FIG. 9
x2
10
x4
14
x2
19
x12
A2 A2
19
14
10
A2

FIG. 10
x2
18
18
18
18
18
Note: Fix playfield ramps (18) align
side of playfield by pre-glued double
side tape.
Note: Tear off the backside papers
underneath the Playfield Ramps.
English
ASSEMBLY
FS058Y21006 12(Continued on the next page) www.medalsports.com

English
ASSEMBLY
FS058Y21006 13(Continued on the next page) www.medalsports.com
FIG. 11
x4
x2
15
x2
16
x16
17
x16
20
21
Note: Hole at the end of Rod designates
handle location. See Arrow Location Below.
20
16
17
16
15
15
16
17
16
21
16
21
20
The Hole
The Hole
P4

English
ASSEMBLY
FS058Y21006 14(Continued on the next page) www.medalsports.com
FIG. 12 Order of players (Overhead View)
= Burgundy
26 29
&
P6
28 &31
27 30
&
Note: Players of the same team color should have
Handles on the same side, and each team’s player
should be facing their opponent.
Note: Make sure 1 Rod Bumper and 1 Rod
Washer are at each end of the Player Rods
before adding Players.
= Black
B
A
C
D
x13
x13
27
29
x13
30
x13
P6
x13
P6
26 x13
Pre-installed
x13
28
Pre-installed
x13
31

English
ASSEMBLY
FS058Y21006 15(Continued on the next page) www.medalsports.com
FIG. 13
x8
22
x8
23
23
FIG. 14
13
x4
x2
A3
13
13
A3
22
The Hole

English
ASSEMBLY
FS058Y21006 16(The last page) www.medalsports.com
FIG. 15
x2
25
x2
32
x2
A7
32
25
A7
Inside
Outside

www.medalsports.com