Medeli Grand 1000 User manual

DIGITAL
GRAND
PIANO
Quick Start Guide
0
5
25
75
95
100
aw_GRAND1000_QuickStartGuide_G06_120912Part1
2012󾾠󾾠9󾾠󾾠12󾾠󾾠 17:09:34

INFORMATION FOR YOUR SAFETY!
THE FCC REGULATION WARNING (for USA)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Unauthorized changes or modification to this system can
void the user's authority to operate this equipment.
CAUTION
The normal function of the product may be disturbed by
Strong Electro Magnetic Interference. If so, simply reset
the product to resume normal operation by following the
owner's manual. In case the function could not resume,
please use the product in other location.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe place for future reference.
Power Supply
Please connect the designated Power Cord to an AC outlet
of the correct voltage.
Do not connect it to an AC outlet of voltage other than that
for which your instrument is intended.
Unplug the Power Cord when not using the instrument, or
during electrical storms.
Connections
Before connecting the instrument to other devices, turn off
the power to all units. This will help prevent malfunction and
/ or damage to other devices.
Location
Do not expose the instrument to the following conditions to
avoid deformation, discoloration, or more serious damage:
Direct sunlight
Extreme temperature or humidity
Excessive dusty or dirty location
Strong vibrations or shocks
Close to magnetic fields
Interference with other electrical devices
Radios and televisions placed nearby may experience
reception interference. Operate this unit at a suitable
distance from radios and televisions.
Cleaning
Clean only with a soft, dry cloth.
Do not use paint thinners, solvents, cleaning fluids, or
chemical-impregnated wiping cloths.
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metallic, or other objects into the
instrument. If this happens, unplug the Power Cord from the
wall outlet. Then have the instrument inspected by qualified
service personnel.
Disconnect all cables before moving the instrument.
2
Regarding the display
This display is a precision device created
using extremely high technology, and careful attention
has been paid to its product quality. Although you may
notice some of the issues listed below, please be aware
that these are due to the characteristics of LCD displays,
and are not malfunctions.
• There may be pixels in the display that are always dark
(unlit) or always bright (lit).
• Depending on the displayed content, the brightness of
the display may appear uneven.
• Depending on the displayed content, horizontal stripes
of shading may be visible.
• Depending on the displayed content, flickering or moire
patterns may be visible.
instrument
0
5
25
75
95
100
aw_GRAND1000_QuickStartGuide_G06_120912Part1
2012󾾠󾾠9󾾠󾾠12󾾠󾾠 17:09:35

Contents
3
Introduction
Panel & Display Description
Front Panel............................ ......................4
Rear Panel..........................................................5
Main Display........................................................6
Setup
Part List...............................................................7
Setup Guide........................................................8
Connections
Power Supply....................................................12
Connecting a pair of Headphones.....................12
Connecting an Audio Equipment.......................12
Connecting an MP3/CD Player.........................12
Connecting a Microphone.................................13
Connecting a Computer....................................13
Connecting External MIDI Devices...................13
Quick Start
Basic Operations
Selection Operation...........................................14
Soft Keyboard Operation...................................14
Setting Operation..............................................15
Playing the Demos.......................................16
Playing Voices..............................................17
Playing with a Style......................................18
Playing Songs...............................................19
Recording Your Performance to MIDI......20
Recording Your Performance as Audio...21
Using a USB Storage Device.....................22
Downloading Data from the Computer....23
........
Appendices
Troubleshooting
Specification..................................................24
Appendices
Voice List...........................................................25
Style List............................................................31
Song List...........................................................33
Demo List..........................................................33
Chord List..........................................................34
MIDI Implementation List..................................35
............................................24
0
5
25
75
95
100
aw_GRAND1000_QuickStartGuide_G06_120912Part1
2012󾾠󾾠9󾾠󾾠12󾾠󾾠 17:09:35

O.T.S.
LINK
AUTO
FILL IN
FADE
IN / OUT
START/
STOP
SYNCSYNC
STOP
INTRO 1 INTRO 2 MAIN 1 MAIN 2 MAIN 3 MAIN 4 ENDING 1
PLAY/
STOP
RW FF
REVERB
ATTACK
ASSIGN 1
CHORUS
RELEASE
ASSIGN 2
VOLUME
CUTOFF
ASSIGN 3
PAN
RESONANCE
ASSIGN 4
MIXER
METRO.
NEW SONG
SELECT
SONG
RECORD
AUDIO
RECORD
A.B.C.
CHORD
DICT.
START
ENDING 2
MASTER
VOLUME
MUSIC
VOLUME SONG
SELECTSCORE
STYLE
SELECT
TEMPO
TAP
EFFEC T ON / OFF
TEMPO
MAX
MIN
MAX
MIN
PAUSE
17
16
15
14
Panel & Display Description
Front Panel
4
1. POWER ON/OFF BUTTON
Turn the power on or off.
2. MASTER VOLUME SLIDER
Adjust the master volume.
3. MUSIC VOLUME SLIDER
Adjust the volume of the playing style
or the playing song.
4. SELECT BUTTON
Select the three effect combinations of
GROUP KNOBS sequentially.
5. GROUP KNOBS
Effect1: Adjust reverb level, chorus
level, volume, pan of the
RIGHT 1 voice.
Effect2: Adjust attack time, release
time, the filter cut off
frequency, the amount of
resonance applied at the filter
cutoff frequency of the
RIGHT 1 voice.
Effect3: The knob effect can be
assigned separately. See
“Controller”.
6. EFFECT ON/OFF BUTTON
Turns the keyboard effect (arpeggio,
harmony, chopper) on or off.
7. SCORE BUTTON
Show the staff of the current song
(SMF).
8. SONG SELECT BUTTON
Enter the SONG SELECT interface.
9. STYLE SELECT BUTTON
Enter the STYLE SELECT interface.
10. TEMPO TAP BUTTON
Change the tempo by “tapping” out
the tempo with this button.
11. TEMPO+, TEMPO- BUTTONS
Adjust the current tempo.
12. METRO. BUTTON
Turn the Metronome on or off.
13. RECORD SONG BUTTON
Enter the RECORD SONG interface.
You’ll record your performance in
SMF format.
14. RECORD AUDIO BUTTON
Enter the audio recording is in ready
state. You’ll record your performance
in WAV format.
15. A.B.C. BUTTON
Turn the A.B.C. MODE on or off.
16. O.T.S. LINK BUTTON
Turn the O.T.S. LINK on or off.
If it is turned on, the One Touch
Settings can be changed when you
select different style.
17. AUTO FILL IN BUTTON
Turn the AUTO FILL IN on or off.
18. FADE IN/OUT BUTTON
Turn the FADE IN or OUT on or
off.
19. INTRO 1, 2 BUTTONS
Play the intro.
20. MAIN 1, 2, 3, 4 BUTTONS
Play the main part.
STYLE CONTROL
21. ENDING 1, 2 BUTTONS
Play the ending.
22. SYNC. STOP BUTTON
Turn the SYNC. STOP on or off.
23. SYNC. START BUTTON
Turn the SYNC. START on or off.
24. START/STOP BUTTON
Start or stop playing the style.
SONG
21. RW, FF BUTTONS
Rewind and fast forward the song.
23. PAUSE BUTTON
Pause the song playback.
24. PLAY/STOP BUTTON
Start playing the song or stop
the song playback.
25. MIXER BUTTON
Enter the MIXER interface.
23
4
5
6
78 9
10 11
12 13
18 19 20 21
22 23 24
1
25
0
5
25
75
95
100
aw_GRAND1000_QuickStartGuide_G06_120912Part1
2012󾾠󾾠9󾾠󾾠12󾾠󾾠 17:09:37

BANK FREEZE STORE O.T.S.
VOICE
MODE
PIANO
MODE
USB
DISK
GLOBAL
SETTING R 2
IGHT R3IGHT
EXIT
M1 M2 M3 M4 M5 M6
DEMO
PART ON/OFF
PIANO E.PIANO ORGAN
ACCORDION &
HARMONICA
GUITAR &
BASS
STRINGS &
ENSEMBLE
BRASS &
SAXOPHONE
FLUTE &
WOODWIND
LEAD &
PAD
FX &
EFFECTS
ETHNIC &
COMBINED
PERCUSSIVE &
DRUM
2 3 41
6 7 85
VOICE
LEFT RIGHT 1
TRANSPOSE OCTAVE
PERFORMANCE MEMORY
O.T.S.
37
36
35
Panel & Display Description
5
26. VOICE MODE BUTTON
Enter the VOICE mode.
27. PIANO MODE BUTTON
Enter the PIANO mode.
28. GLOBAL SETTING BUTTON
Enter the GLOBAL SETTING
interface.
29. USB DISK BUTTON
Enter the USB DISK interface.
30. PART ON/OFF BUTTONS
Turn LEFT, RIGHT1, RIGHT2,
RIGHT3 on and off individually.
31. DATA DIAL
Increase and decrease the
value.
32. VOICE BUTTONS
Enter the VOICE SELECT
interface. You'll select a voice
category.
33. MULTI PADS
Add spice to your performance
with special dynamic phrases
by pressing them.
34. EXIT BUTTON
Exit the current interface and
return to the previous display.
35. +, - BUTTONS
Increase and decrease the
value by 1.
36. BANK BUTTON
Enter the PERFORMANCE SELECT
interface.
37. FREEZE BUTTON
Turn the FREEZE function on or off.
38. STORE BUTTON
Save the panel setups to one of the
performance memorys.
26 27 28
30
31
32
34 38
39
40 41
39. M1-M6 BUTTONS
PERFORMANCE MEMROY:
Recall the panel setups from one of
the performance memorys.
O.T.S (M1-M4):
Call up all the settings (voice, effect,
etc) that match the current style.
40. O.T.S. BUTTON
Switch to the O.T.S. function.
41. TRANSPOSE+, TRANSPOSE-
BUTTONS
Adjust the TRANSPOSE value.
42. OCTAVE+, OCTAVE-
BUTTONS
Adjust the OCTAVE value.
43. USB PORT
Connect the USB storage device.
PEDAL
USB
IN OUT THRU L R R
220-240V~ 50/6 0Hz
AUX. OUT
L/MONOMIC MIC VOL
MIDI AUX.IN
F3 T1AL250V
44. MIDI IN/OUT/THRU JACKS
Connect other products equipped
with a MIDI interface.
45. USB JACK
Connect to a computer.
46. MIC JACK
Connect a microphone.
47. MIC VOL KNOB
Adjust the input volume of the
microphone.
48. AUX IN JACKS
Connect any external audio source,
such as an MP3 or CD player.
49. AUX OUT JACKS
Connect to your amp/audion system.
For monaural output, use the L/MONO
jack.
50. AC POWER INLET
Connect the AC power cable to this inlet.
51. PEDAL JACK
Connect pedals.
52. PEDALS
The function of pedal can be set.
The default settings are soft,
sostenuto, sustain from left to right.
45 46 47 48 49
51
Rear Panel
43
52
29
33
42
50
44
0
5
25
75
95
100
aw_GRAND1000_QuickStartGuide_G06_120912Part1
2012󾾠󾾠9󾾠󾾠12󾾠󾾠 17:09:37