Medeli DP280K User manual

DIGITAL PIANO
Owner’s Manual
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 1 17/11/8 12:59

02
INFORMATION FOR YOUR SAFETY!
THE FCC REGULATION WARNING (for USA)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Unauthorized changes or modification to this system can
void the user's authority to operate this equipment.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe place for future reference.
Power Supply
Please connect the designated AC adaptor to an AC outlet
of the correct voltage.
Do not connect it to an AC outlet of voltage other than that
for which your instrument is intended.
Unplug the AC power adaptor when not using the instru-
ment, or during electrical storms.
Connections
Before connecting the instrument to other devices, turn off
the power to all units. This will help prevent malfunction and
/ or damage to other devices.
Location
Do not expose the instrument to the following conditions to
avoid deformation, discoloration, or more serious damage:
Direct sunlight
Extreme temperature or humidity
Excessive dusty or dirty location
Strong vibrations or shocks
Close to magnetic fields
Interference with other electrical devices
Radios and televisions placed nearby may experience
reception interference. Operate this unit at a suitable
distance from radios and televisions.
Cleaning
Clean only with a soft, dry cloth.
Do not use paint thinners, solvents, cleaning fluids, or
chemical-impregnated wiping cloths.
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metallic, or other objects into the instru-
ment. If this happens, remove the electric plug from the
outlet. Then have the instrument inspected by qualified
service personnel.
Disconnect all cables before moving the instrument.
CAUTION
The normal function of the product may be disturbed
by Strong Electro Magnetic Interference. If so, simply
reset the product to resume normal operation by
following the owner's manual. In case the function
could not resume, please use the product in other
location.
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 2 17/11/8 12:59

Contents
Panel Description
Front Panel........................................................................4
Pedal.................................................................................4
Rear Panel.........................................................................5
Setup
Setup Guide.......................................................................6
Connections
Connecting a pair of Headphones.....................................9
Connecting an Audio Equipment........................................9
Connecting an MP3/CD Player..........................................9
Connecting a Computer.....................................................9
Quick Start
Power Supply...................................................................10
Adjusting the Master Volume...........................................10
Playing the Demo............................................................10
Playing the Voices............................................................10
Playing the Songs............................................................11
Recording........................................................................11
Playing the Voices
Playing a Voice................................................................12
Playing Two Voices Simultaneously.................................12
Playing Different Voices with Both Hands........................12
Voice Volume...................................................................13
Playing a Voice Demo......................................................13
Touch Response..............................................................13
Transpose........................................................................14
Tune.................................................................................14
Pedal Resonance............................................................14
Metronome......................................................................15
Tempo..............................................................................15
DSP Effect
Reverb.............................................................................16
Chorus.............................................................................16
D.A.S.(Dynamic Acoustic System)...................................16
Song
Play the Songs.................................................................17
Practice the Songs...........................................................17
Song Recording
Prepare Recording...........................................................18
Start Recording................................................................18
Stop Recording................................................................18
Play back Recording........................................................18
Delete Recording.............................................................18
Duet.................................................................................19
Twinova..........................................................................19
MIDI Out Channel...........................................................20
Beep Tone.......................................................................20
Troubleshooting............................................................21
Specifications................................................................21
Appendices
Voice List..........................................................................22
Song List..........................................................................22
Demo List.........................................................................22
MIDI Implementation Chart..............................................23
03
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 3 17/11/8 12:59

METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
0 2 5 701 - 02 05 - 06 RES.V-DEMO DEMO07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
8
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF
L3
6 8
1
09 - 10 13 - 14 19 - 20
0 2 5 701 - 02 05 - 06 RES.V-DEMO DEMO
R TAP 0 2
4
579
07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
8
9
DUAL
Panel Description
Front Panel
Pedal
1. [METRO] Button
Press it to turn the Metronome on or off.
2. [PLAY] Button
Start or stop playing the recorded song.
Press [METRO] and [PLAY] together to enter
Recording mode.
3. [DUAL] Button
Press it to turn the Dual function on or off.
4. [LOWER] Button
Press it to turn the Lower function on or off.
5. [SONG] Button
Press it to enter Song mode.
6. [START/STOP] Button
Start or stop playing a song.
7. [FUNCTION] Button
Press and hold it to access secondary functions
of other keys.
When [FUNCTION] button is pressed:
8. [VOICE] Keys
Press to select a preset voice.
9. [V-DEMO] Key
Press it to start or stop playing a voice demo.
10. [TWINOVA] Key
Press it to turn the Twinova function on or off.
11. [RES.] Key
Press it to turn the Pedal Resonance on or off.
12. [DUET] Keys
Press to turn the Duet function on or off,
or to select a Duet type.
13. [DEMO] Key
Press it to start or stop playing the demo.
14. [SONG] Keys
Press to select a song.
15. [TEMPO] Keys
Press to edit the Tempo value.
34. Soft Pedal
Press the soft pedal, the notes played on the keyboard will
sound softer.
35. Sostenuto Pedal
Press the sostenuto pedal, the notes played before you step
on the pedal will have a sustain effect.
36. Sustain Pedal
Press the sustain pedal, the notes played on the keyboard
will have a longer sustain. The sustain pedal also supports
half-pedal operation. Perform with the sustain pedal to
achieve a smooth sustain effect.
04
1
5
6
7
8
9 12 13
14 15
10
11
2
4
3
34 35 36
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 4 17/11/8 12:59

VOLUME
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 8
1
TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
D.A.S.
VOLUME
TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
Panel Description
Rear Panel
When [FUNCTION] button is pressed:
16. [METRO] Keys
Press to set the Metronome type.
17. [TRANSP.] Key
Press it to edit the Transpose setting.
18. [TUNE] Key
Press it to edit the Tune setting.
19. [TOUCH] Key
Press it to edit the Touch response setting.
20. [REVERB] Key
Press it to edit the Reverb setting.
21. [CHORUS] Key
Press it to edit the Chorus setting.
22. [METRO-VOL] Key
Press it to edit the Metronome volume.
23. [R1-VOL] Key
Press it to edit the Upper voice volume.
24. [R2-VOL] Key
Press it to edit the Dual voice volume.
25. [L-VOL] Key
Press it to edit the Lower voice volume.
26. [SPLIT] Key
Press it to edit the split point setting.
27. [OCTAVE] Key
Press it to edit Twinova octave setting.
28. [MIDI OUT] Key
Press it to edit the MIDI out channel setting.
29. [<]/[>] Keys
Press to adjust the parameters.
30. [REC] Keys
Press to select a user song to record or to play back.
31. [BEEP] Key
Press it to turn the Beep tone on or off.
32. [D.A.S.]Key
Press it to turn the D.A.S. function on or off.
33. [POWER] Switch
Turn the power on or off.
34. [VOLUME] Knob
Adjust the master volume.
37. USB Jack
Connect to a computer.
38. AUX OUT Jack
Connect to an external audio equipment.
39. AUX IN Jack
Connect an external audio source, such as an MP3 or CD player.
40. DC IN Jack
Connect the specified power adaptor.
05
16
17
18
19 22
23 25 26 28
29
30
31
33
32
34
2724
20 21
AUX OUT AUX IN
37 38 39 40
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 5 17/11/8 12:59

Setup
This section contains information about setting up your instrument and preparing to play. Please go through this section
carefully before turning the power on.
Setup Guide
To assemble the stand, you will need a Phillip's screwdriver (not supplied). Check that all the parts listed below are included
before proceeding.
06
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Piano body
Left leg
Right leg
Pedal box
Big back board
Screw 6 X 50 (4 pcs)
Hand screw (2 pcs)
Screw M6 X 18 (4 pcs)
Screw 4 X 15 (4 pcs)
Screw cap (4 pcs)
Pedal cable
AC power adaptor
1
5
678910
11
2
4
3
12
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 6 17/11/8 12:59

Setup
A. Put the pedal box (4) in between the left and right leg components
(2&3), use 4 pieces of screws (8) (2 on each side) to fix the legs
onto the foot pedal unit, then cover the screw caps (10) on top
(2 on each side) (Make sure the components are in the right
direction before installing.).
B. Place the big back board against the stand completed in Step
A, then use screw (9) and screw (6) to fix it to the stand.
C. Put the piano body on the top of the assembly finished
in Step B, then use screws (6) and hand screw (7) to fix it.
07
77
6
6
6
6
9999
8
10
810
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 7 17/11/8 12:59

Setup
D. Connect the pedal cable to the pedal jack at the rear bottom of the
piano. The setup is completed, now the piano is ready to connect to
power supply.
08
11
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 8 17/11/8 12:59

Connecting a pair of Headphones
Plug a pair of standard stereo headphones here for private practice or
late-night playing.
Jack 1: When headphones are connected, sound can be heard from the
headphones and speakers.
Jack 2: When headphones are connected, the internal speakers will be
muted, and the sound can only be heard from the headphones.
Note：
To avoid the risk of hearing loss, do not use headphones at high volume
level for a long period of time.
Connecting an Audio Equipment
The AUX OUT jack delivers the output of the instrument to external
audio equipment such as a keyboard amplifier, stereo sound system,
mixing console, or recording interface.
Use an audio cable to connect the AUX OUT jack of the instrument to
the INPUT jack of the external audio equipment.
Notes:
1. Turn off the power to all devices before connecting or disconnecting
external equipment.
2. To avoid damaging the speakers, set the master volume level to
minimum before turning on the power.
Connecting an MP3/CD Player
The AUX IN jack receives audio signals from an external audio source
such as an MP3 or a CD player.
Use an audio cable to connect the AUX IN jack of the instrument to the
OUTPUT jack of an MP3/CD player. The instrument’s speakers will play
the music transmitted from the external player, and you can play along.
Connecting a Computer
Use a standard USB cable to connect the USB jack of the instrument to
the USB port of a computer.
With USB, you can save a keyboard performance to the computer or
use the instrument to play back music played on the computer.
Note:
Do not set the USB MIDI device to be both input and output simultane-
ously when configuring the software on your computer. Otherwise, the
sound will be overlapped when playing the keyboard.
Connections
09
AUX OUT AUX IN
AUX OUT AUX IN
AUX OUT AUX IN
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 9 17/11/8 12:59

Power Supply
1. Before connecting to power supply, please set the [POWER]
switch to “OFF” and set the master volume level to minimum.
2. Connect the power adaptor to the DC IN jack on the rear panel.
3. Plug the power adaptor into an appropriate AC outlet.
4. Press the [POWER] switch. The button indicator lights up, indicating
the instrument is powered on.
5. When you are ready to turn the instrument off, press and hold the
[POWER] switch for a second. The button indicator will turn off.
Notes：
1. In order to save energy, the instrument will automatically shut down
after 30 minutes when not in use. To turn off this function, press and
hold the key A0 (the first key to the left of the keyboard), then turn on
the power.
2. For your safety, please unplug the instrument when it is not in use or
during a thunderstorm.
Adjusting the Master Volume
Rotate the [VOLUME] knob clockwise to increase the master volume or
counter-clockwise to decrease it. Adjust to set the desired volume level.
Note:
If the speakers do not produce sound, please check if the master
volume is set too low or if headphones are plugged into Jack 2.
Playing the Demo
The instrument features a professional demo. Please refer to the Demo
List for details.
1. Press and hold [FUNCTION], then press the key marked [DEMO] to
start playing the demo. Repeat this operation to stop the demo.
2. During demo playback, press the [START/STOP] button to stop
playing and exit Demo mode.
Playing the Voices
The instrument features a variety of exceptionally realistic voices.
Please refer to the Voice List for details.
1. Press and hold [FUNCTION], then press one of the VOICE keys to
select a preset voice.
2. Each VOICE key has two preset voices. Press a VOICE key once
to select the first preset voice, press this key again to select the
second preset voice.
Note:
If you select the first voice of a key, pressing another key will select the
first voice of that key, in the same way, if you select the second voice of
a key, pressing another key will select the second voice of that key.
Quick Start
10
FUNCTION
FUNCTION
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
0 2 5 701 - 02 05 - 06 RES.V-DEMO
DEMO
07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
0
01 - 02 05 - 06 RES.V-DEMO
DEMO
07 - 08 11 - 12 15 - 16 17 - 18
1
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 RES.V-DEMO DEMO07 - 08 11 - 12 15 - 16 17 - 18
DUAL
START /STOP
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 10 17/11/8 12:59

Playing the Songs
The instrument features a variety of preset songs. Please refer to the
Song List for details.
1. Press the [SONG] button to enter Song mode. All songs start
playing in a loop.
2. Press and hold [FUNCTION], then press one of the SONG keys to
select a desired song.
3. Press the [START/STOP] button to stop playing. Press this button
again to play the current song in a loop.
Note:
When using the keys marked SONG [0–9] to select a song, you will
need to press 2 keys total. For example, press 0,8 in sequence to
select the “08” song.
Recording
You can record and save your keyboard performance as a user song
on the instrument.
1. Press [METRO] and [PLAY] buttons at the same time, then use the
keys marked REC [1–5] to select a user song to which the
recording will be saved.
2. It then enters Recording standby mode. The button indicator for
[START/STOP] will blink. Now you can set the instrument voice,
song, tempo and so on.
3. Press the [START/STOP] button or simply play the keyboard to
start recording. The button indicators for [METRO] and [PLAY] will
stay lit.
4. During recording, if you press [METRO] and [PLAY] buttons at the
same time, recording will stop and be saved. The button indicators
for [METRO] and [PLAY] will turn off.
5. To play back a user song, press and hold [PLAY], then use the
keys marked REC [1–5] to select the desired user song.
6. After selecting a user song, the button indicator for [PLAY] will light
up. Press this button again to start the playback.
7. To stop the playback, press the [PLAY] button.
8. After selecting a user song for playback, if you press [METRO]
and [PLAY] buttons at the same time, it will delete the selected
user song.
Note:
If you do not select a user song for recording or playback, it will
automatically use the same user song in the last operation. If you
restart the instrument, it will select the first user song by default.
11
Quick Start
VOLUME
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 81
TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 815 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
6
8
9
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF
L
31
09 - 10 13 - 14 19 - 20
0 2 5 7
01 - 02 05 - 06 RES.V-DEMO DEMO
R
TAP 0 2
07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
8
9
DUAL
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4
BEEP
3 6 812 5 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
1
3
4 6
8
9
START /STOP
SONG
METRO
PLAY REC
METRO
PLAY REC
METRO
PLAY REC
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 11 17/11/8 12:59

The instrument features a variety of exceptionally realistic voices.
Please refer to the Voice List for details.
Playing a Voice
1. Press and hold [FUNCTION], then press one of the VOICE keys to
select a preset voice.
2. Each VOICE key has two preset voices. Press a key once to select
the first preset voice, press this key again to select the second
preset voice.
3. Play the keyboard to use the selected voice for performance.
Note:
If you select the first voice of a VOICE key, pressing another key will
select the first voice of that key, in the same way, if you select the
second voice of a key, pressing another key will select the second
voice of that key.
Playing Two Voices Simultaneously
The Dual function allows two different voices to be layered together,
creating a more full and rich sound.
1. Select an upper voice.
2. Press the [DUAL] button to turn on the Dual function. The button
indicator will light up.
3. Press and hold [DUAL], then press one of the VOICE keys to select
a dual voice.
4. Play the keyboard and you will hear two different voices playing
together.
5. Press the [DUAL] button again to turn off this function. The button
indicator will turn off.
Note:
When the Lower and Dual functions are in use, only the right hand
area will play the dual voice.
Playing Different Voices with Both Hands
The Lower function splits the keyboard into two areas so as to create
different voices for each of your hands. The left hand voice is the lower
voice.
1. Select an upper voice.
2. Press the [LOWER] button to turn on the Lower function. The button
indicator will light up.
3. Press and hold [LOWER], then press one of the VOICE keys to
select a lower voice.
4. Play the keyboard with both hands and you will hear two different
voices from the left and right hand areas.
5. Press the [LOWER] button again to turn off this function. The button
indicator will turn off.
Playing the Voices
12
VOLUME
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
80 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
9
FUNCTION
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
0
01 - 02 05 - 06 RES.V-DEMO
DEMO
07 - 08 11 - 12 15 - 16 17 - 18
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 RES.V-DEMO07 - 08 11 - 12 15 - 16 17 - 18
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 V-DEMO07 - 08 11 - 12 15 - 16 17 - 18
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 09 - 10 13 - 14
01 - 02 05 - 06 07 - 08 11 - 12 15 - 16
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 RES.V-DEMO07 - 08 11 - 12 15 - 16 17 - 18
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
0
01 - 02 05 - 06 RES.V-DEMO
DEMO
07 - 08 11 - 12 15 - 16 17 - 18
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
0
01 - 02 05 - 06 RES.V-DEMO
DEMO
07 - 08 11 - 12 15 - 16 17 - 18
DUAL
DUAL
LOWER
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 12 17/11/8 12:59

Split point
The key that splits the keyboard into the left and right hand areas is
called "split point". The default split point is F#3 (34) , however, you can
assign it to any other key.
1. Press and hold [FUNCTION], then press the key marked [SPLIT] to
edit the split point, and then tap a key on the keyboard to assign the
split point to that key.
2. Release the [FUNCTION] button to exit the edit mode.
Voice Volume
You can adjust separately the volume of the upper voice, the dual voice
and the lower voice.
1. Press and hold [FUNCTION], then press the key marked [R1-VOL]
to edit the volume of the upper voice.
2. In edit mode, press and hold [FUNCTION], then use the keys
marked SETTING [<]/[>] to adjust the volume range from 0 to 15.
3. In edit mode, press and hold [FUNCTION], then press SETTING [<]
and [>] keys at the same time to reset the volume to default.
4. Set the volume of the dual voice and lower voice in the same way.
Playing a Voice Demo
1. In Voice mode, press and hold [FUNCTION], then press the key
marked [V-DEMO] to start playing the current upper voice demo.
2. During demo playback, press and hold [FUNCTION], then press the
[V-DEMO] key to stop playing. You can also press the
[START/STOP] button to stop the playback.
Touch Response
The touch response feature allows you to expressively control the
voice level based on your playing dynamics, just as on an acoustic
instrument. There are 5 types of touch settings (Off, 1–5). The default
setting is 3.
1. Press and hold [FUNCTION], then press the key marked [TOUCH]
to edit the touch setting.
2. In edit mode, press and hold [FUNCTION], then use the keys
marked SETTING [<]/[>] to change the setting.
3. In edit mode, press and hold [FUNCTION], then press SETTING [<]
and [>] keys at the same time to restore the default setting.
Playing the Voices
13
Parameter
OFF
1
2
3
4
5
Description
Fixed
Soft 1
Soft 2
Medium
Hard 1
Hard 2
FUNCTION
FUNCTION
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 815 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
4 6
8
9
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT
MIDI OUT
2 4 BEEP
3 6 810 2 5 7DEMO
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
1
3
4 6
8
9
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 09 - 10 13 - 14
01 - 02 05 - 06 07 - 08 11 - 12 15 - 16
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 09 - 10 13 - 14
01 - 02 05 - 06 07 - 08 11 - 12 15 - 16
DUAL
ON / OFF
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4
3 6 810 2 5 7DEMO
R TAP 0
0 3 5 6 TUNE REVERB
CHORUS
R2-VOL
L-VOL
OCTAVE
1 3
2
4
5 7 9
1
3
4 6
8
9
TWINOVA ON / OFF
L
2 4 TRANSP.
TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT3 6 810 2 5 7RES.V-DEMO DEMO
R TAP 0
0 3 5 6
TUNE REVERB
CHORUS
R2-VOL
L-VOL
OCTAVE2
4
5 7 9
1
3
4 6
8
9
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT
MIDI OUT
2 4 BEEP
3 6 810 2 5 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
1
3
4 6
8
9
FUNCTION
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04
TWINOVA
ON / OFF09 - 10 13 - 14 19 - 20
001 - 02 05 - 06
RES.V-DEMO
DEMO07 - 08 11 - 12 15 - 16 17 - 18
1
DUAL
FUNCTION
FUNCTION
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 815 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
4 6
8
9
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 815 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
4 6
8
9
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 13 17/11/8 12:59

Transpose
The transpose function allows the overall pitch of the instrument to be
transposed up or down by a maximum of one octave in semitone
steps.
1. Press and hold [FUNCTION], then press the key marked [TRANSP.]
to edit the transpose setting.
2. In edit mode, press and hold [FUNCTION], then use the keys
marked SETTING [<]/[>] to change the setting range from -12 to
+12.
3. In edit mode, press and hold [FUNCTION], then press SETTING [<]
and [>] keys at the same time to restore the default setting “00”.
Notes：
1. For example, set the transpose value to -05 or 007, you will hear “G”
pitch when playing the “C” keys.
2. Transpose setting applies to the accompaniment and the entire
keyboard voice.
Tune
This function adjusts the pitch of the entire keyboard in 2-cent incre-
ments over a range of ±50 (100 cents).
1. Press and hold [FUNCTION], then press the key marked [TUNE] to
edit the tune setting.
2. In edit mode, press and hold [FUNCTION], then use the keys
marked SETTING [<]/[>] to change the setting.
3. In edit mode, press and hold [FUNCTION], then press SETTING [<]
and [>] keys at the same time to restore the default setting “00”.
Pedal Resonance
When a piano voice is selected, pressing the sustain pedal will add
string resonance effect to the notes you play. The string resonance
effect faithfully recreates the resonance from the strings and sound-
board of an acoustic grand piano.
1. Press and hold [FUNCTION], then press the key marked
[RES.] to turn this function on or off.
2. This function is turn on by default.
Notes:
1. The chorus effect will be disabled when pedal resonance is in use.
2. There may be a slight pause in the sound if you switch pedal
resonance on/off while performing.
Playing the Voices
14
Parameter
Tune >
Tune <
Description
To raise the overall pitch by 1.
To lower the overall pitch by 1.
VOLUME
FUNCTION
TWINOVA ON / OFF
L
2 4
TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT3 6 810 2 5 7RES.V-DEMO DEMO
R TAP 0
0 3 5 6
TUNE REVERB
CHORUS
R2-VOL
L-VOL
OCTAVE2
4
5 7 9
1
3
4 6
8
9
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 07 - 08 11 - 12 15 - 16 17 - 18
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
DUAL
FUNCTION
TWINOVA ON / OFF
L
2 4
TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT3 6 810 2 5 7RES.V-DEMO DEMO
R TAP 0
0 3 5 6
TUNE REVERB
CHORUS
R2-VOL
L-VOL
OCTAVE2
4
5 7 9
1
3
4 6
8
9
FUNCTION
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04
TWINOVA
ON / OFF09 - 10 13 - 14 19 - 20
001 - 02 05 - 06
RES.V-DEMO
DEMO07 - 08 11 - 12 15 - 16 17 - 18
1
DUAL
VOLUME
VOLUME
4 BEEP
3 5
VOLUME
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 815 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
6
8
9
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 14 17/11/8 12:59

Notes:
1. When using the keys marked TEMPO [0-9] to set the tempo value,
you will need to press 3 keys total. For example, press 0, 6, 4 in
sequence to enter a tempo value of 64.
2. In standby mode, if the times you press the [TAP] key equal to that
of the metronome beat, the instrument will start the metronome
sound at the speed of the last two presses.
Metronome
The metronome provides a steady beat to help you practice at a
preset tempo.
Turn the metronome on or off.
Press the [METRO] button to turn the metronome on or off.
When the metronome is in use, the button indicator for [START/STOP]
will flash in sync with the metronome sound. (Red for downbeat and
blue for upbeat). To adjust the metronome tempo, please refer to
Tempo for details.
Set the metronome beat.
Press and hold [FUNCTION], then use the keys marked METRO [0–6]
to change the metronome beat. There are 6 beat types: 0, 2–6.
Set the metronome volume.
1. Press and hold [FUNCTION], then press the key marked [METRO–
VOL] to edit the metronome volume.
2. In edit mode, press and hold [FUNCTION], then use the keys
marked SETTING [<]/[>] to change the volume range from 0 to
15.
3. In edit mode, press and hold [FUNCTION], then press SETTING
[<] and [>] keys at the same time to reset the volume to default.
Note:
The metronome is not available in Song mode.
Tempo
Each song, duet pattern and so on is preset with a default or standard
tempo, but you can change the tempo range from 30 to 280.
1. Press and hold [FUNCTION], then use the keys marked TEMPO
[<]/[>] to change the tempo value.
2. Press and hold [FUNCTION], then press the TEMPO [<] and [>]
keys at the same time to restore the default tempo “120”. In Song
mode, it will reset to the default song tempo.
3. Press and hold [FUNCTION], then press the keys marked TEMPO
[0–9] to set the tempo value. For example, press 2, 1, 4 in
sequence to enter a tempo value of 214.
4. Alternatively, press and hold [FUNCTION], then tap the key marked
[TAP] twice to get the desired tempo. The instrument will start the
metronome sound at the tapping speed.
Playing the Voices
15
Parameter
TAP
Tempo >/<
0–9
Description
Set the tempo at the tapping speed.
Increase/decrease the tempo value by 1.
Enter a specific tempo value
(Press 3 keys total to enter a tempo value).
VOLUME
2 4 BEEP
3 5
ON / OFF
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2
3 6 810 2 5 7DEMO
R TAP 0
0 3 5 6 TUNE REVERB
CHORUS
R2-VOL
L-VOL
OCTAVE
1 3
2
4
5 7 9
1
3
4 6
8
9
FUNCTION
FUNCTION
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF
L3 6 81
09 - 10 13 - 14 19 - 20
0 2 5 701 - 02 05 - 06 RES.V-DEMO DEMO
R TAP
0 2
4
5 7 9
07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
8
9
DUAL
FUNCTION
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF
L3 6 81
09 - 10 13 - 14 19 - 20
0 2 5 701 - 02 05 - 06 RES.V-DEMO DEMO
R TAP
0 2
4
5 7 9
07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
8
9
DUAL
FUNCTION
TWINOVA ON / OFF
L
2 4
TRANSP. TOUCH
R1-VOL
METRO-VOL
3 6 81
09 - 10 13 - 14 19 - 20
0 2 5 7RES.V-DEMO DEMO
R TAP 0
0 3 5 6
TUNE REVERB CHORUS
2
4
5 7 9
07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
8
9
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 09 - 10 13 - 14
01 - 02 05 - 06 07 - 08 11 - 12 15 - 16
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 07 - 08 11 - 12 15 - 16 17 - 18
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
0 2 5 701 - 02 05 - 06 RES.V-DEMO DEMO07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
DUAL
VOLUME
2 4 BEEP
3 5
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 815 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
6
8
9
METRO
PLAY REC
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 15 17/11/8 12:59

The DSP effects will add ambiance and depth to your performance in a
variety of ways.
Reverb
1. Press and hold [FUNCTION], then press the key marked [REVERB]
to edit the reverb setting.
2. In edit mode, press and hold [FUNCTION], then use the keys
marked SETTING [<]/[>] to change the reverb type.
3. In edit mode, press and hold [FUNCTION], then press the SETTING
[<] and [>] keys at the same time to restore the default reverb type
“2 Hall”.
Chorus
1. Press and hold [FUNCTION], then press the key marked [CHORUS]
to edit the chorus setting.
2. In edit mode, press and hold [FUNCTION], then use the keys
marked SETTING [<]/[>] to change the chorus type.
3. In edit mode, press and hold [FUNCTION], then press the SETTING
[<] and [>] keys at the same time to restore the default chorus type
“OFF”.
D.A.S. (Dynamic Acoustic System)
The loudness of sound perceived by human ears over the frequency
spectrum is different. As the audio volume decreases, human ears’
sensitivity to extreme high and low frequencies will decline. As a result,
the audio may seem to become 'thin' sounding at low volumes, losing
bass and treble.
The D.A.S. function, will dynamically adjust the sound of the instrument
according to the overall volume for better sound balance, giving you a
more clear, natural and rich sound.
Turn the D.A.S. function on or off
Press and hold [FUNCTION], then press the key marked [D.A.S.] to
turn this function on or off.
Note:
The D.A.S. function is turned on by default.
DSP Effect
16
Parameter
OFF
1
2
3
4
5
Description
Reverb effect is disabled.
Room
Hall
Church
Delay
Pan delay
Parameter
OFF
1
2
3
4
5
Description
Chorus effect is disabled.
Chorus 1
Chorus 2
Chorus 3
Flanger
Rotary
VOLUME
BEEP
VOLUME
4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
VOLUME
4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
VOLUME
SPLIT MIDI OUT
2 4 BEEP
OCTAVE
1 3 5
FUNCTION
TWINOVA ON / OFF
L
2 4 TRANSP.
TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT3 6 810 2 5 7RES.V-DEMO DEMO
R TAP 0
0 3 5 6
TUNE REVERB
CHORUS
R2-VOL
L-VOL
OCTAVE2
4
5 7 9
1
3
4 6
8
9
FUNCTION
ON / OFF
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2
3 6 810 2 5 7DEMO
R TAP 0
0 3 5 6 TUNE REVERB
CHORUS
R2-VOL
L-VOL
OCTAVE
1
2
4
5 7 9
1
3
4 6
8
9
FUNCTION
VOLUME
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
D.A.S.
3 6 81
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
max with D.A.S.
without D.A.S.
with D.A.S.
without D.A.S.
without D.A.S.
with D.A.S.
Level
20HZ 20000HZ Frequency
mid
min
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 16 17/11/8 12:59

METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF
L
1
09 - 10 13 - 14 19 - 20
0 2 5 7
01 - 02 05 - 06 RES.V-DEMO DEMO
R
TAP 0
07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
8
9
DUAL
The instrument features a variety of preset songs. Please refer to the
Song List for details.
Play the Songs
1. Play all songs in a loop.
Press the [SONG] button to enter Song mode. The button indicator
will light up. All preset songs start playing in a loop.
2. Play the selected song in a loop.
When the playback stops, press the [START/STOP] button to play
the current song in a loop.
3. Select a song.
Press and hold [FUNCTION], then use the keys marked SONG [<]/[>]
or [0–9] to select a desired song.
Notes:
When using the keys marked SONG [0–9] to select a song, you will
need to press 2 keys total. For example, press 0,8 in sequence to select
the “08” song.
4. Stop the playback.
During song playback, press the [START/STOP] or [SONG] button to
stop playing.
Practice the Songs
All preset songs can be practiced with melody-off.
1. Press and hold [FUNCTION], then press the key marked SONG [L] to
mute the left hand melody. You can practice the left hand melody of
the song. Repeat this operation to activate the left hand melody.
2. In the same way, press and hold [FUNCTION], then press the key
marked SONG [R] to mute the right hand melody. You can practice
the right hand melody of the song.
17
Song
FUNCTION
FUNCTION
FUNCTION
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF
L
09 - 10 13 - 14 19 - 20
0 2 5 7
01 - 02 05 - 06 RES.V-DEMO DEMO
R TAP
07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
8
9
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF
L
1
09 - 10 13 - 14 19 - 20
0 2 5 7
01 - 02 05 - 06 RES.V-DEMO DEMO
R
TAP 0
07 - 08 11 - 12 15 - 16 17 - 18
1
3
4 6
8
9
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 RES.V-DEMO DEMO07 - 08 11 - 12 15 - 16 17 - 18
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 RES.V-DEMO DEMO07 - 08 11 - 12 15 - 16 17 - 18
DUAL
SONG
START /STOP
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 17 17/11/8 12:59

VOLUME
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
6 8 0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
5 7 9
You can record and save your keyboard performance as a user song on
the instrument, and then play it back.
Prepare Recording
1. Before recording starts, you need to select a user song to which the
recording will be saved. Press [METRO] and [PLAY] buttons at the
same time, then use the keys marked REC [1–5] to select a user
song.
2. It then enters Recording standby mode. The button indicator for
[START/STOP] will blink. Now you can set the instrument voice,
tempo and so on.
Start Recording
In Recording standby mode, press the [START/STOP] button or simply
play the keyboard to start recording. The button indicators for [METRO]
and [PLAY] will stay lit.
Note:
If the current user song has data, the data will be overwritten after
recording.
Stop Recording
1. During recording, if you press [METRO] and [PLAY] buttons at the
same time, recording will stop and be saved. The button indicators
for [METRO] and [PLAY] will turn off.
2. During recording, if the memory gets full, recording will automatically
stop and be saved. The button indicators for [METRO] and [PLAY]
will turn off.
Play back Recording
1. After recording, press and hold [PLAY], then use the keys marked
REC [1–5] to select the desired user song.
2. Press the [PLAY] button to start playback. The button indicator will
light up.
3. To stop playback, press the [PLAY] button again. The button indicator
turns off.
Delete Recording
1. Press and hold [METRO] and [PLAY] buttons, then turn on the power.
This operation will delete all user songs.
2. After selecting a user song for playback, if you press [METRO] and
[PLAY] buttons at the same time, it will delete the selected user song.
Note:
The saved user songs will not be lost after power off.
18
Song Recording
VOLUME
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 8 0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 54
5 7 9
VOLUME
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
6 8 0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
5 7 9
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4
BEEP
3 6 810 2 5 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
1
3
4 6
8
9
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4
BEEP
3 6 810 2 5 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
1
3
4 6
8
9
METRO
PLAY REC
METRO
PLAY REC
METRO
PLAY REC
METRO
PLAY REC
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 RES.V-DEMO07 - 08 11 - 12 15 - 16 17 - 18
DUAL
START /STOP
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 18 17/11/8 12:59

The Duet function will enrich your performance. Simply play a chord with
your left hand, and the instrument will play a preset duet pattern and
produce a beautiful melody.
Turn the duet function on or off.
Press and hold [FUNCTION], then press the key marked DUET
[ON/OFF] to turn this function on or off.
Select a duet pattern.
Press and hold [FUNCTION], then press the key marked DUET [<]/[>] to
select a desired duet pattern. There are 32 duet patterns. The default
setting is “01”.
Note:
Each voice is matched with a preset duet pattern, so when you change a
voice, the default duet pattern will change as well.
Set the duet split point
When the Duet function is in use, the keyboard will be split into two
areas. You can play chords in the left hand area, and play melody in the
right hand area. The default split point is the same as in the lower
function: F#3 (34). You can assign the split point to any other key.
1. Press and hold [FUNCTION], then press the key marked [SPLIT] to
edit the split point, and then tap a key on the keyboard to assign the
split point to that key.
2. Release the [FUNCTION] button to exit the edit mode.
The Twinova function splits the keyboard into two areas with the same
pitch and voice, for the convenience of playing together with a friend or
instructor.
Turn the Twinova function on or off.
Press and hold [FUNCTION], then press the key marked [TWINOVA] to
turn this function on or off. The default split point is E3 (32). In Twinova
mode, the Dual and Lower functions are not available.
Select a voice for Twinova.
The upper voice selected before entering Twinova will become the
default voice for both areas. To change the voice, press and hold
[FUNCTION], then press one of the VOICE keys.
Set the split point for Twinova.
In Twinova mode, press and hold [FUNCTION], then press the key
marked [SPLIT] to edit the split point, and then tap a key (range from C3
to C6) to assign the split point to that key.
Release the [FUNCTION] button to exit the split point edit mode.
19
Duet
Twinova
VOLUME
VOLUME
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA
ON / OFF
09 - 10 13 - 14 19 - 20
0 201 - 02 05 - 06 RES.V-DEMO DEMO07 - 08 11 - 12 15 - 16 17 - 18
1
3
4
DUAL
FUNCTION
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA
ON / OFF
09 - 10 13 - 14 19 - 20
0 201 - 02 05 - 06 RES.V-DEMO DEMO07 - 08 11 - 12 15 - 16 17 - 18
1
3
4
DUAL
FUNCTION
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04
TWINOVA
ON / OFF09 - 10 13 - 14 19 - 20
001 - 02 05 - 06
RES.V-DEMO
DEMO07 - 08 11 - 12 15 - 16 17 - 18
1
DUAL
FUNCTION
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT
MIDI OUT
2 4
3 6 810 2 5 7DEMO
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
1
3
4 6
8
9
FUNCTION
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 RES.V-DEMO07 - 08 11 - 12 15 - 16 17 - 18
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA09 - 10 13 - 14 19 - 20
01 - 02 05 - 06 RES.V-DEMO07 - 08 11 - 12 15 - 16 17 - 18
DUAL
METRO
PLAY REC
LOWER
SONG
START /STOP
FUNCTION
03 - 04 TWINOVA ON / OFF09 - 10 13 - 14 19 - 20
0 201 - 02 05 - 06 RES.V-DEMO DEMO07 - 08 11 - 12 15 - 16 17 - 18
1
DUAL
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 19 17/11/8 12:59

Set the octave for Twinova.
This function will shift the pitch of the entire keyboard up or down by one
octave. This function is available only in Twinova mode. The octave
setting will be reset to default when you exit Twinova mode.
1. Press and hold [FUNCTION], then press the key marked [OCTAVE]
to edit the octave setting.
2. In edit mode, press and hold [FUNCTION], then use the keys marked
SETTING [<]/[>] to adjust the octave value.
3. In edit mode, press and hold [FUNCTION], then press the SETTING
[<] and [>] keys at the same time to reset the octave to default “0”.
Note:
The Twinova function is not available in Song mode and Demo mode.
1. Press and hold [FUNCTION], then press the key marked [MIDI OUT]
to edit the MIDI Out channel.
2. In edit mode, press and hold [FUNCTION], then use the keys marked
SETTING [<]/[>] to set the MIDI Out channel range from 01 to 16.
3. In edit mode, press and hold [FUNCTION], then press the SETTING
[<] and [>] keys at the same time to restore the default setting “01”.
The instrument will produce a sound when using the keyboard to change
a setting. This function is turned on by default.
To turn off the function, press and hold [FUNCTION], then press the key
marked [BEEP].
20
Twinova
MIDI Out Channel
Beep Tone
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 81
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
8
9
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 81
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
8
9
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4 BEEP
3 6 815 7
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
6
8
9
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4
3 6 810 2 5 7
DEMO
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
1
3
4 6
8
9
FUNCTION
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4
3 6 81
0 2 5 7DEMO
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
1
3
4 6
8
9
FUNCTION
VOLUME
L
2 4 TRANSP. TOUCH
R1-VOL
METRO-VOL
SPLIT MIDI OUT
2 4
BEEP
3 6 817
R TAP 0
0 3 5 6 TUNE REVERB CHORUS
R2-VOL
L-VOL
OCTAVE
1 3 5
2
4
5 7 9
6
8
9
FUNCTION
C
M
Y
CM
MY
CY
CMY
K
aw_DP280K_manual_G02_171108.pdf 20 17/11/8 12:59