GB
1
2
3
4
5
6
7
8
9
0
Demo button – For a brief demonstration of the features of the device, press the Demo
button. The unit will briefly go through each function. Once complete, the unit auto-
matically turns off. The LED light will flash to indicate the active functions.
Shiatsu programs – Choose from 3 preset programs where the Shiatsu massage
travels up and down in a specific area of the back. To select a program, simply press the
button and the LED will illuminate. To deselect, press the button again or press another
button.
= Full Back = Upper Back = Lower Back
Spot shiatsu – While the unit is in shiatsu massage mode, press either button to
stop and focus the massage action in one place. Once the unit is operating in Spot
shiatsu mode, you may adjust the mechanism position by holding down either button
until the desired position is reached.
Vibration massage – Adds invigorating vibration massage to upper legs/thighs.
Power button – To turn on the unit, first press the POWER button. The LED indica-
tor will illuminate and confirm your selection. To turn off the unit, simply press the button
again. The LED indicator will flash while the back massage mechanism returns to its
lowest point and then it will turn off.
Perfect fit – To customize the massage to your height, press the "Perfect Fit" button
at the highest desired position. The massage heads will not travel higher than that
position for the duration of the massage. To deselect the Perfect fit feature, press the
"Perfect Fit" button a second time. The massage will return to its full motion range.
Rolling Massage - A rolling massage is like a massage with two hands working up and
down your back.
Rolling programs – Choose from 3 preset programs where the Rolling massage
travels up and down in a specific area of the back. To select a program, simply press the
button and the LED will illuminate. To deselect, press the button again or press another
button.
Width adjustment – While the unit is in Rolling massage mode for the back, press
this button to adjust the distance between the massage heads. With each press, the
massage heads will move to the next available position.
Heat – For soothing heat during massage, simply press the heat button and the
orange LED light will illuminate. To deselect, press the button again and the orange
LED light will turn off. For your safety, heat cannot be turned on if massage is not
selected.
Shiatsu massage mechanism
NOTE: The moving dual massage mechanism on the back always „parks“ or finishes in
its lowest position. It will continue to this position after the power has been turned off. If
the electrical supply is interrupted, when power is restored, the mechanism will "park" or
move to its lowest position.