Part No. 2321-0238
Trigger Lock Mounting Kit
MS Fats / Slim
Black
Before assembly, read Warnings inside
MEB1949
WARNING
During installation, make sure that the windshield and
hardware do not interfere with any cables or wiring
when the forks are turned all the way in either direction.
Also make sure , through the full range of adjustment,
that the windshield and hardware do not hit the gas
tank.
1.
2.
3.
This is a detachable windshield, ALWAYS make sure
the locking mechanism is fully engaged after installing
the windshield.
The improper installation of this kit and related
components could result in serious injury or death.
CAUTION
Memphis Shades windshields are made from Lucite®
acrylic, and will last for years with proper care. Clean
your windshield with plenty of soapy water (mild dish-
washing liquid is best) and a soft cotton cloth. Use your
bare hands to feel and dislodge bugs, or cover with a
wet, soapy towel and let it soak. Don’t use paper towels
and scrape with anything. Small scratches can be re-
moved with NOVUS #2.
1.
Never use any glass cleaning products, petroleum
based chemicals, or cleaning agents with ammonia,
bleach or any other harsh chemicals. This includes (but
not limited to) RainX, brake fluid, acetone, paint thinner,
benzene and gasoline. “If it hurts your nose, it will hurt
the plastic.”
2.
Glass cleansing agents will cause severe damage to
your windshield, and will void your warranty.
For care and cleaning we recommend using Memphis
Shades All Kleer, a unique cleaner/polish, bug
remover and rain repellant that leaves a super slick
surface that makes the next cleaning even easier.
3.
Memphis Shades warrants all product components, metal
and plastic, against defects in materials and workmanship
for 24 months.
For Parts and Warranty Help, Contact:
Memphis Shades, Inc.
P.O. Box 429
Rossville, TN 38066
(901) 853 0293
Visit us on the web at www.memphisshades.com or you
can also reach us by email:
customerservice@memphisshades.com
At certain times of the day the Sunlight can reflect off
the curvature of a windshield and cause extreme heat
build-up on motorcycle instruments and instrument
panel. Take care when parking. Park facing the sun,
place an opaque object over the instruments or adjust
the windshield to avoid reflections.
4.
REVISION 0
Aluminum parts are electrocoated (E-coated)
for durability and weather resistance.
Additional tools required that are not included in this kit.
7/16" or 11mm Wrench.
1. Cover gas tank and front fender with towels to avoid dam-
age during installation.
2.Install the two mounting plates oponto the windshield,
using the bottom and third bolt up. Leave the nylon washers
off. The small tab goes to the bottom, big one at the top.
Tabs point in towards the headlight. (Fig 1)
3. On the Roadliner, use the 5mm Allen wrench, locate and
remove the two upper allen head bolts, one on each side of
the headlight. (Fig 2)
4. On the Stratoliner, remove the OEM windshield and
mounting hardware.
continued over….
Ref Code Description Qty
nI1949 Mounting Instructions 1
oM1092EB Throttle side plate assembly 1
pM1091EB Clutch side plate assembly 1
qM1088EC Throttle side bracket assembly 1
rM1087EC Clutch side bracket assembly 1
sR319EC 1/2” diameter spacer 2
tM366EC 8mm x 30mm Button head cap screw 2
uR320EC 1 1/2” Support spacer 2
vR312EC 8mm Flat washer 2
wM1450 8mm x 25mm Button head cap screw 2
R306 5mm Long arm allen wrench 1
M310 3/16 Short arm allen wrench 1
1. Kit Contents
2. Mounting Instructions
nqr
s
t
v
w
p
o
u
11
12
11
12
