Mercedes-Benz Hands-free system User manual

For a connection between your mobile phone and your Mercedes-Benz hands-free system to be
successful, Bluetooth® must be turned on in your mobile phone. Please make sure to also read the
operating and pairing instructions of the mobile phone. Please follow the steps below to connect your
mobile phone Asus A002A with the mobile phone application of your Mercedes-Benz hands-free system
using Bluetooth®.
Step 1(to be performed on your Asus A002A)
Step 2
To get to the telephone screen of your Mercedes-Benz
hands-free system press the Phone icon on the homescreen.
Step 3
Select the Phone icon in the lower right corner.
Step 4
Select the “Connect a New Device” application.
Page 1 of 3

Step 5
Select the “Start Search Function”
Step 6
The system will now search for any Bluetooth compatible phones. This may take some time depending on
how many devices are found by the system.
Step 7
Once the system completes searching select your mobile
phone (example "My phone") from the list.
Step 8
The pairing process will generate a 6-digit passcode and
display it on the screen. Verify that the same 6 digits are
shown on the display of your phone.
Step 9 (to be performed on your Asus A002A)
There will be a pop-up "Bluetooth Request: 'MB Bluetooth' would like to pair with your phone. Confirm
that the code '### ###' is shown on 'MB Bluetooth'. "
Select "Pair" on your phone if the codes match.
Page 2 of 3

Step 10
After the passcode is verified on both the mobile and the COMAND, the phone will begin to be
authorized.
Step 11 (to be performed on your Asus A002A)
If the authorization was successful the Bluetooth screen on your phone will now show “MB Bluetooth”
and “Connected”
Step 12
After your mobile phone is successfully connected via
Bluetooth® to your Mercedes-Benz hands-free system, the
name of your mobile phone (example "My Phone") will be
displayed on the top of the phone screen.
Page 3 of 3