Metra Electronics 95-7318 User manual

INSTALLATION INSTRUCTIONS FOR PART 95-7318
Phillips Screwdriver • Small Flat Blade Screwdriver • Panel Removal Tool
1-800-221-0932 www.metraonline.com
KIT FEATURES
©COPYRIGHT 2004-09 METRA ELECTRONICS CORPORATION
•DDIN Head Unit Provision
•ISO Stacked Head Unit Provision
A) DDIN Brackets B) DDIN Trim Plate
KIT COMPONENTS
TOOLS REQUIRED:
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
• 70-7301 - 1999-up Kia / Hyundai harness
95-7318
AB
APPLICATIONS
2005-2006 Kia Spectra 5
METRA. THE WORLD’S BEST KITS.™

Dash Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
TABLE OF CONTENTS
95-7318
K NOWLEDGE IS P OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP certified
technicians
Note:
Refer also to the instructions included with the aftermarket radio.

95-7318
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Unclip and remove entire panel sur-
rounding radio and including A/C
controls.
(Figure A)
2
2005-2006 KIA SPECTRA 5
Remove (4) Phillips screws to extract
radio from dash.
(Figure B)
3
DASH DISASSEMBLY
A
B

2
95-7318
2005-2006 KIA SPECTRA 5
KIT ASSEMBLY
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
1
Attach the Double DIN brackets to
the inside edge of the Double DIN
trim plate. (Figure A)
2
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio. (Figure B)
3
Reassemble dash in reverse order of
disassembly.
4
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISION
A
B

NOTES
95-7318

NOTES
95-7318

NOTES
95-7318

95-7318 INSTRUCTIONS
1-800-221-0932 www.metraonline.com
REV. 11/17/09 © COPYRIGHT 2004-07 METRA ELECTRONICS CORPORATION INST95-7318
METRA. THE WORLD’S BEST KITS.™