Metra Electronics 99-7340B User manual

APPLICATIONS
KIT FEATURES
KIT COMPONENTS
TOOLS REQUIRED
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932 metraonline.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
INSTALLATION INSTRUCTIONS FOR PART 99-7340B
2011 KIA SORENTO
99-7340B
• DIN Head unit provisions with pocket
• ISO DIN Head unit provision with pocket
• Painted Matte Black to Match Factory
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate
WIRING & ANTENNA CONNECTIONS (Sold Separately)
• 70-7303 2009-Up Kia/Hyundai Harness
• 40-KI11 2007-Up Kia Antenna Adapter
• Panel Removal Tool • Phillips Screwdriver • Socket Wrench
AB C

TABLE OF CONTENTS
DASH DISASSEMBLY
• 2011 KIA SORENTO . . . . . . . . . . . . . . . . . . . . . . 1-2
KIT ASSEMBLY
2011 KIA SORENTO
• DIN HEAD UNIT PROVISION . . . . . . . . . . . . . . . . . . 3
• ISO DIN HEAD UNIT PROVISION . . . . . . . . . . . . . . . 4
*NOTE: Refer also to the instructions included with the aftermarket radio.
CAUTION: Metra recommends disconnecting the negative battery terminal
before beginning any installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before reconnecting the battery
or cycling the ignition.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP certified
technicians
INSTALLATION INSTRUCTIONS FOR PART 99-7340B

2011 KIA SORENTO
99-7340B DASH DISASSEMBLY
Remove Shifter knob. (Fig. A)
Remove the shifter surround panel.
(Fig. B)
Remove panel under the heater &
A/C controls. (Fig. C)
Continued on Pg. 2 .......................
1
2
3
A
B
C
1

2
Remove (2) Phillips screws from
bottom and remove center fascia
panel. (Fig. D)
Remove (4) Phillips screws securing
the heater & A/C controls. (Fig. E)
Remove (4) Phillips screws securing
the radio. (Fig. F)
D
E
F
2011 KIA SORENTO
99-7340B DASH DISASSEMBLY
4
5
6
Continue to kit assembly...............

3
99-7340B KIT ASSEMBLY
DIN HEAD UNIT PROVISION
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Fig. A)
Snap the pocket into the bottom
opening of the radio housing.
(Fig. B)
Slide the aftermarket head unit into
the cage and secure. (Fig. B)
Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS.
Reassemble dash in reverse order
of disassembly.
1
2
3
A
B
4
5

4
ISO DIN HEAD UNIT PROVISION
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Fig. A)
Slide the head unit into the radio
opening until the side clips engage.
(Fig. B)
Snap the Trim plate into the Radio
Housing. (Fig. B)
Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS.
Reassemble dash in reverse order
of disassembly.
1
2
3
A
B
4
5
99-7340B KIT ASSEMBLY

INSTALLATION INSTRUCTIONS FOR PART 99-7340B
NOTES

REV. 6/28/2010
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-7340B