Metra Electronics 95-9607B User manual

Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 4/15/22 INST95-9607B
INSTALLATION INSTRUCTIONS
95-9607B
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio bracket • C) Allen head machine-thread screws (6) • D) Push nut retainers (4) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
Porsche
911 (991) 2012-2016
Boxster (981) 2013-2016
Caymen (981) 2014-2016
A/B C D

2386.257.1187
|
MetraOnline.com
1. Unclip the center console side panels
starting from the rear, then pull back to
release the front of the panels.
Note: Pull out away from console and
toward back of vehicle. (Figure A)
2. Remove (4) T-25 Torx screws securing
the radio then unplug and remove the
radio from the dash. (Figure B)
Continue to Kit Assembly
DASH DISASSEMBLY
(Figure A) (Figure B)

REV. 4/15/2022 INST95-9607B 3
KIT ASSEMBLY
(Figure A)
1. Secure the radio trim panel to the radio
bracket using the (4) included push nut
retainers. (Figure A)
2. Slide the radio into the 95-9607B
assembly from the back, and then
secure the radio using the screws
provided with the radio. (Figure A)
Note: Allen head screws are provided
if needed.
3. Locate the factory wiring harness and
antenna connection in the dash, and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Secure the completed assembly to the
dash using the factory screws.
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.

Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 4/15/22 INST95-9607B
INSTALLATION INSTRUCTIONS
95-9607B
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.edu or call
386-672-5771 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
[e-mail]
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 7:00 PM
Sunday: 10:00 AM - 4:00 PM