Metra Electronics 95-3305 User manual

APPLICATIONS
INSTALLATION INSTRUCTIONS FOR PART 95-3305
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• GMOS-LAN-01 - GM LAN interface 2006-up
• GMOS-LAN-02 - GM LAN amplified interface 2006-up
Antenna Adapter:
• 40-CR10 - Chrysler/GM antenna adapter 2002-up
• Small flat blade screwdriver • Panel removal tool • Phillips screwdriver • Socket set
• Torx driver • Allen wrench
TOOLS REQUIRED
BA
• A) Double DIN trim plate • B) Double DIN bracket
KIT FEATURES
KIT COMPONENTS
• Double DIN radio provision
• Stacked ISO radio provision
GMC multi-kit 2006-up
95-3305
See application list inside

95-3305
Applications
CAUTION: Metra recommends disconnecting the negative battery terminal before beginning
any installation. All accessories, switches, and especially air bag indicator lights must be
plugged in before reconnecting the battery or cycling the ignition.
Note: Refer to the instructions included with the aftermarket radio.
Buick
Enclave 2008-up
Lucerne 2006-2011
Chevrolet
Avalanche 2007-up
Equinox 2007-2009
Express Van 2008-up
Impala 2006-up
Monte Carlo 2006-2007
Silverado** 2007-up
Suburban 2007-up
Tahoe 2007-up
Traverse 2009-up
GMC
Acadia 2007-up
Savanna 2008-up
Sierra** 2007-up
Yukon XL Denali 2007-up
Yukon/XL 2007-up
Hummer
H2 2008-2009
Pontiac
Torrent 2007-2009
Saturn
Outlook 2007-2009
Vue 2008-2009
Suzuki
XL-7 2007-2009
**Excluding classic models

Dash Disassembly 95-3305
Buick Lucerne 2006-2011
Chevy Impala 2006-up
Monte Carlo 2006-2007
1. Unclip and remove the trim panel
around radio and A/C control. (Figure A)
2. Remove (6) 9/32” screws to extract
radio and A/C control from sub dash.
(Figure B)
Continue to kit assembly
(Figure A)
(Figure B)

Chevy Avalanche/Tahoe/Suburban/
Silverado (excluding classic models) 2007-up
GMC Yukon/Sierra (excluding classic models) 2007-up
1. Unclip and remove radio trim panel.
(Figure A)
2. Remove (2) 8 mm screws securing
switch panel below climate controls.
Unplug and remove switch panel.
(Figure B)
3. Remove (2) 8 mm screws securing
climate controls. Unplug and remove
climate controls. (Figure B)
4. Remove (4) 9/32” screws securing
radio. Unplug and remove the radio.
(Figure C)
Continue to kit assembly
(Figure A)
(Figure C)
(Figure B)
Dash Disassembly 95-3305

Dash Disassembly 95-3305
Chevy Express Van/GMC
Savanna 2008-up
1. Remove (2) 10 mm bolts from below
knee bolster under steering column and
remove panel.
2. Remove (2) 10 mm bolts from panel
below passenger dash airbag and
remove panel.
3. Unsnap and remove radio and
instrument cluster panel.
Note: To access radio it may not be
necessary to completely remove radio
and instrument cluster panel.
4. Remove (4) 9/32” bolts to remove radio.
Continue to kit assembly
(Figure B)
(Figure D)
(Figure C)
(Figure A)

Suzuki XL-7
2007-2009
1. Press in on sides of the shifter boot to
release it from the shifter trim panel.
(Figure A)
2. Lift the boot up to access the Allen
screw securing the shifter knob to the
shifter lever. Loosen the Allen screw and
remove the shifter knob. (Figure B)
3. Remove (1) Torx screw from the shifter
trim panel (Figure C), then using the
panel removal tool unsnap the shifter
trim panel. Unplug and remove the
panel. (Figure D)
4. Using a panel removal tool unsnap the
radio trim panel. Unplug and remove the
panel. (Figure E)
5. Remove (4) 9/32” screws securing the
radio. Unplug and remove the radio.
Continue to kit assembly
Dash Disassembly 95-3305
(Figure B)
12:02
103:5
(Figure E)
(Figure C)
AUX
BAND
FWD
REV
SEEK SEEK
PASSENGER AIR BAG
AUX
(Figure D)
(Figure A)

Dash Disassembly 95-3305
Chevy Equinox/Pontiac
Torrent 2007-2009
1. Unsnap panel below power window
switch and remove. (Figure A)
Note: This allows you to unplug the
window switch easier.
2. Unsnap and remove entire panel
surrounding radio and shifter.
(Figure B)
3. Remove (4) 9/32” screws securing
radio. Unplug and remove the radio.
(Figure C)
Continue to kit assembly (Figure A)
(Figure C)
(Figure B)

Buick Enclave 2008-up/GMC Acadia
2007-up/Saturn Outlook 2007-2009
Chevy Traverse 2009-up
1. Unclip the radio trim panel including the
climate controls.
2. Unplug the climate controls and remove
the panel.
3. Remove (4) 9/32” screws securing the
radio. Unplug and remove the radio.
Continue to kit assembly
Buick Enclave/Chevy Traverse
Saturn Outlook
GMC Acadia
Dash Disassembly 95-3305

Dash Disassembly 95-3305
Hummer H2 2008-2009
1. Unclip the radio trim panel including the
A/C vents.
2. Unplug any harnesses connected to the
panel and remove the panel. (Figure A)
3. Remove (4) 9/32” screws securing the
climate controls.
4. Unplug and remove the climate controls.
5. Remove (4) 9/32” screws securing the
radio. Unplug and remove the radio.
Continue to kit assembly (Figure A)

Saturn Vue 2008-2009
1. Unclip and remove the trim panel on top
of the radio trim panel. (Figure A)
2. Remove (2) Phillips screws exposed
under panel previously removed.
(Figure B)
3. Unclip and remove the radio trim panel
including the A/C vents. (Figure B)
4. Unclip and remove the trim panel
surrounding the shifter including the
climate controls. (Figure C)
5. Remove (4) 9/32” screws securing the
radio. Unplug and remove the radio.
Continue to kit assembly
(Figure A)
(Figure C)
(Figure B)
Dash Disassembly 95-3305

Kit Assembly 95-3305
1. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down. (Figure B)
Note XL-7 ONLY: Trim top corners of
radio housing. (Figure A)
2. Slide the aftermarket radio into the cage
and secure. (Figure B)
3. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order
of disassembly.
Double DIN radio provision
(Figure A)
(Figure C)
(Figure B)

Kit Assembly 95-3305
Staked ISO radio provision
1. Mount the ISO brackets to the radio
with the screws supplied with the unit.
(Figure B)
Note XL-7 ONLY: Trim top corners of
radio housing. (Figure A)
2. Slide the radio into the radio opening
until the side clips engage. (Figure C)
3. Snap the trim plate into the radio
housing. (Figure C)
4. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
(Figure A)
(Figure C)
(Figure B)

APLICACIONES
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-3305
CONEXIONES DE CABLEADO Y ANTENA (se venden por separado)
Arnés del cableado:
• GMOS-LAN-01 - GM interfaz LAN 2006 y mas
• GMOS-LAN-02 - GM interfaz LAN amplificada 2006 y mas
Adaptador de antena:
• 40-CR10 - Adaptador de antena Chrysler/GM 2002 y mas
• Destornillador de hoja plana pequeño • Herramienta para retirar paneles
• Destornillador Phillips • Juego de soportes • Destornillador Torx • Llave Allen
HERRAMIENTAS REQUERIDAS
BA
• A) Placa de terminación DIN doble • B) Soportes DIN dobles
CARACTERÍSTICAS DEL KIT
COMPONENTES DEL KIT
• Provisión de radio doble DIN
• Provisión de radio ISO verticales
GMC multi-kit 2006 y mas
95-3305
Lista de aplicaciones dentro

95-3305
Aplicaciones
PRECAUCIÓN: Metra recomienda desconectar el terminal negativo de la batería antes de
comenzar cualquier instalación. Todos los accesorios, interruptores y, especialmente, las luces
indicadoras de airbag deben estar enchufados antes de volver a conectar la batería o comenzar
el ciclo de ignición.
Nota: Remítase a las instrucciones incluidas con el radio de posventa.
Buick
Enclave 2008 y mas
Lucerne 2006-2011
Chevrolet
Avalanche 2007 y mas
Equinox 2007-2009
Express Van 2008 y mas
Impala 2006 y mas
Monte Carlo 2006-2007
Silverado** 2007 y mas
Suburban 2007 y mas
Tahoe 2007 y mas
Traverse 2009 y mas
GMC
Acadia 2007 y mas
Savanna 2008 y mas
Sierra** 2007 y mas
Yukon XL Denali 2007 y mas
Yukon/XL 2007 y mas
Hummer
H2 2008-2009
Pontiac
Torrent 2007-2009
Saturn
Outlook 2007-2009
Vue 2008-2009
Suzuki
XL-7 2007-2009
**No incluye los modelos clásicos

Desmontaje del tablero 95-3305
Buick Lucerne 2006-2011
Chevy Impala 2006 y mas
Monte Carlo 2006-2007
1. Desenganche y retire el panel de
terminación que rodea el control del
radio y del aire acondicionado.
(Figura A)
2. Retire (6) tornillos de 9/32” in para
extraer el control del radio y del aire
acondicionado del subtablero.
(Figura B)
Continuará al ensamble del kit
(Figura A)
(Figura B)

Chevy Avalanche/Tahoe/Suburban/
Silverado (no incluye los modelos clásicos) 2007 y mas
GMC Yukon/Sierra (no incluye los modelos clásicos) 2007 y mas
1. Desenganche y retire el panel de
terminación del radio. (Figura A)
2. Retire (2) tornillos de 8 mm que sujetan
el panel de interruptores debajo de los
controles de clima. Desenchufe y retire
el panel de interruptores. (Figura B)
3. Retire (2) tornillos de 8 mm que sujetan
los controles de clima. Desenchufe y
retire los controles de clima. (Figura B)
4. Retire (4) tornillos de 9/32” in que
sujetan el radio. Desenchufe y retire
el radio. (Figura C)
Continuará al ensamble del kit
(Figura A)
(Figura C)
(Figura B)
Desmontaje del tablero 95-3305

Desmontaje del tablero 95-3305
Chevy Express Van/GMC
Savanna 2008 y mas
1. Retire (2) pernos de 10 mm de la
parte de abajo del amortiguador para
las rodillas que se encuentra debajo
de la columna de la dirección y retire
el panel. (Figura A)
2. Retire (2) pernos de 10 mm del panel
que se encuentra debajo del airbag del
tablero del pasajero y retire el panel.
(Figura B)
3. Quite a presión y retire el panel del
radio y del grupo de instrumentos.
(Figura C)
Nota: Es posible que no sea necesario
retirar completamente el panel del radio
y del grupo de instrumentos para tener
acceso al radio.
4. Retire (4) pernos de 9/32” in para
retirar el radio. (Figura D)
Continuará al ensamble del kit
(Figura B)
(Figura D)
(Figura C)
(Figura A)

Suzuki XL-7
2007-2009
1. Presione los lados de la cubierta de
protección de la palanca de velocidades
para liberarla del panel de terminación
de la palanca de velocidades. (Figura A)
2. Levante la cubierta de protección
para poder acceder al tornillo Allen,
que sujeta la perilla de la palanca
de velocidades a la palanca de
velocidades. Afloje el tornillo Allen
y retire la perilla de la palanca de
velocidades. (Figura B)
3. Retire (1) tornillo Torx del panel
de terminación de la palanca de
velocidades (Figura C), y luego use una
herramienta para retirar paneles para
quitar a presión el panel de terminación
de la palanca de velocidades.
Desenchufe y retire el panel. (Figura D)
4. Con una herramienta para retirar
paneles, quite a presión el panel de
terminación del radio. Desenchufe y
retire el panel. (Figura E)
5. Retire (4) tornillos de 9/32” in
que sujetan el radio. Desenchufe y
retire el radio.
Continuará al ensamble del kit
Desmontaje del tablero 95-3305
(Figura B)
12:02
103:5
(Figura E)
(Figura C)
AUX
BAND
FWD
REV
SEEK SEEK
PASSENGER AIR BAG
AUX
(Figura D)
(Figura A)

Desmontaje del tablero 95-3305
Chevy Equinox/Pontiac
Torrent 2007-2009
1. Quite a presión el panel que se
encuentra debajo del interruptor del
alzacristales y retírelo. (Figura A)
Nota: Esto le permite desenchufar
el interruptor de las ventanas con
mayor facilidad.
2. Quite a presión y retire el panel
completo que rodea el radio y la
palanca de velocidades. (Figura B)
3. Retire (4) tornillos de 9/32” in que
sujetan el radio. Desenchufe y retire
el radio. (Figura C)
Continuará al ensamble del kit
(Figura A)
(Figura C)
(Figura B)

Buick Enclave 2008 y mas/GMC Acadia
2007 y mas/Saturn Outlook 2007-2009
Chevy Traverse 2009 y mas
1. Desenganche el panel de
terminación del radio, incluidos los
controles de clima.
2. Desenchufe los controles de clima y
retire el panel (vea los dibujos).
3. Retire (4) tornillos de 9/32” in
que sujetan el radio. Desenchufe y
retire el radio.
Continuará al ensamble del kit
Buick Enclave/Chevy Traverse
Saturn Outlook
GMC Acadia
Desmontaje del tablero 95-3305