Miele professional XKM RS232 User manual

Operating instructions
XKM RS232
en-GB
To avoid the risk of accidents or damage to the
appliance it is essential to read these instructions
before it is installed, commissioned and used for the
first time.
M.-Nr. 07655210

Caring for the environment
2
Caring for t h e environm ent
Disposal of the packing material
The packaging is designed to
protect the XKM RS232 during
transportation. Ensure that any
plastic wrappings, bags etc. are
disposed of safely and kept out of
the reach of babies and young
children. Danger of suffocation!
Rather than just throwing these
materials away, please ensure that
they are recycled.
Disposing of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly
could be potentially hazardous to
human health and to the
environment. They are, however,
essential for the correct functioning
of your appliance. Please do not
dispose of it with your household
waste.
Please dispose of it at your local
community waste
collection/recycling centre or contact
your Dealer for advice. Ensure that it
presents no danger to children
whilst being stored for disposal. See
the "Warning and Safety" section of
this booklet for further details.

Contents
3
Contents
Caring for the environment ................................................................. 2
Disposal of the packing material ...................................................... 2
Disposing of your old appliance ....................................................... 2
Contents ............................................................................................... 3
Warning and Safety instructions ........................................................ 4
Correct application........................................................................... 4
Technical safety............................................................................... 4
Operation.............................................................................................. 6
Button .................................................................................................... 6
Indicator lights............................................................................................ 6
Switching on and off .................................................................................. 6
Installation / setting up........................................................................ 7
Installation ....................................................................................... 7
Electrical connection........................................................................ 7
Technical data...................................................................................... 8

Warning and Safety instructions
4
Warning and Safety i nstru ction s
This RS 232 module is built in
accordance with current safety
regulations. Incorrect use can,
however, lead to personal injury.
To avoid the risk of accidents
and damage to the XKM RS232
please read these instructions
carefully before using it for the
first time. They contain important
information on its safety, use and
maintenance.
Keep these operating
instructions in a safe place and
ensure that new users are
familiar with the content. Pass
them on to any future owner.
Correct application
The XKM RS232 module is
exclusively designed for linking
data between a Miele
Professional appliance and a
data receiver such as the Miele
remote service module. Any
other applications may be
dangerous.
The XKM RS232 module is only
to be used in Miele Professional
appliances that are factory fitted
with a communication shaft.
Technical safety
Before fitting the XKM RS232
module, check it for any
externally visible damage. Do not
install and use a damaged
module.
Before connecting the XKM
RS232 module, ensure that the
connection data on the data plate
(voltage and frequency) match
the mains electricity supply.
A defective XKM RS232 module
must not be repaired. It must only
be replaced by a genuine Miele
original module.
The XKM RS232 module is only
completely isolated from the
electricity supply when the Miele
Professional appliance:
– has been switched off at the wall
socket and the plug withdrawn, or
– it has been switched off at the
mains, or
– the screw-out fuse has been
removed (in countries where this
is applicable), or
– the module has been removed
from its communication shaft.

Warning and Safety instructions
5
Please ensure that the XKM
RS232 data cable is fitted and
laid correctly.
The XKM RS232 module must be
installed and connected by a
suitably qualified engineer to
ensure safety.

Operation
6
Operation
Button
The button on the XKM RS232
module is used to check that the
installation was carried out correctly.
A red LED control light will come on
when the button is pressed to
indicate that the module has been
correctly installed and is ready for
use. If the LED does not light up,
the module has not be installed
correctly or the power supply to the
professional appliance has been
interrupted or the module is faulty.
Indicator lights
The module has 2 different coloured
LEDs. They signal active
communication during use.
Switching on and off
The appliance does not have a
separate on/off switch. Switching off
the power supply to the Miele
appliance switches the module off.

Installation / setting up.
7
Installation / setting up
Installation
Disconnect the Miele Professional
appliance from the power supply.
Slide the XKM RS232 module into
the communication shaft on the
Miele professional appliance.
A gentle push will engage the XKM
RS232 module into its correct
position, ready for use.
Reconnect the Miele Professional
appliance to the power supply.
Press the XKM RS232 button to test
that it is correctly installed. A red
LED will come on to signal that the
module is ready for use.
Electrical connection
The XKM RS232 module gets its
power supply from the Miele
appliance that it is connected to. It
does not need a separate power
supply.
The data interface on the XKM
RS232 module is low voltage
compliant in accordance with EN
60950. Externally connected
appliances must also comply with
this standard.

Technical data
8
Technical dat an
Power supply
Minimum Typically Maximum Unit
Voltage 100 240 V AC
Current 0.01 A
Frequency 50 60 Hz
RS-232 interface
Minimum Typically Maximum Unit
Data rate 38 kBits
Maximum cable length 1.5 Metres
SUB-D connector
Pin 2 RxD (input)
Pin 3 TxD (output)
Pin 5 GND
Temperature
Minimum Typically Maximum Unit
Operation 0 80 °C

Appendix
9

Appendix
10

Appendix
11

Alteration rights reserved M.-Nr. 07655210/02
United Kingdom:
Miele Co. Ltd
Fairacres, Marcham Road
Abingdon, Oxon, OX14 1TW
Tel: [phone]
Fax: [phone]
Customer Contact Centre Tel: [phone]
E-mail: [e-mail]
Internet: www.miele.co.uk