MJ LED LIGHTNING MJ-1044-6IN1 User manual

MINI LED MOVING HEAD
MJ-1044-6IN1
User Manual
======PROFESSIONAL LED LIGHTING ========
Thank you for choosing our Mini LED moving head light. For the sake of
your safety, Please read and follow these instructions carefully and keep
this manual in a safe place for future reference.

15 13 0-255 Motor and sound cotrol sensitive adjust（0-100%）
16 14
0 No function
1-7 Color change by fade
8-39 Color auto running 0
40-72 Color auto running 1
73-105 Color auto running 2
106-138 Color auto running 3
139-140 Color auto running 4
141-167 Color sound running 0
168-195 Color sound running 1
196-223 Color sound running 2
224-251 Color sound running 3
252-255 Color sound running 4
17 15 0-255 Color auto and sound running sensitive adjust
（0-100%）
18 16 250-255 Reset (need 5 seconds)
7
Catalogue
Chapter Page
I. Product Illustration ---------------------------------------------------------1
II. Installation--------------------------------------------------------------------1
III. DMX connection ------------------------------------------------------------1
IV. Maintaining-------------------------------------------------------------------2
V. Precautions ------------------------------------------------------------------2
VI. Warning -----------------------------------------------------------------------2
VII. Difficult processing----------------------------------------------------------3
VIII. Declaration -------------------------------------------------------------------3
IX. Equipment and appendix--------------------------------------------------3
X. Technical parameters ------------------------------------------------------4
XI. Menu display function------------------------------------------------------4
XII. DMX function-----------------------------------------------------------------6
Before open the mini LED moving head and if you want to do the
repair work, please make sure the power source is at the separation
condition.
Unceasingly carries on the product improvement about our company
the policy, in this instruction booklet carries the data will have the
possibility to be able to change in the future, when no longer separate
notice change matters concerned. Our company retains when the
product improvement changes the related specification the authority.
This instruction booklet publisher cannot be responsible regarding
this instruction booklet in information accuracy, also cannot the
related consequence which causes regarding these information be
responsible.

P
I. Product Illustration
Our product adopt semiconductor to produce radiation, LED as light origin.
With advantage of operation quietly, less power waste, high brightness,
gaily-colored, astigmatic, high longevity (60-80 thousands hours),
non-calorific etc. Our product use 6IN1*4 LED, synthesize turn colors under
election, can create effect of auto gradual change/skip change color,
frequent blinking. Can accept control by DMX512, real save power, no
pollution green lighting tool.
II. Installation
Use the two bolts with M6 size by the clip of the LED moving head to install
it. Should guarantee the reliability of the install, this way is to prevent the
LED moving head occurs swings and skids when it’s working. The weight is
about 3Kg of each LED moving head, before install, you should confirm the
structure whether can support this weight of the LED moving head light. In
order to guarantee the security, you also need to install a safety chain in the
lamp body side handle.
III. DMX connection
The connection of controller between the led moving head lamp or
respectively led moving head lamp should use the twin core shielded cable,
and the diameter of each core at least be 0.3mm.
When installing, uses the DMX signal terminal is much better. It can avoid
the digital control signal breached by the electrical noise. Generally
speaking, the DMX terminal is Cannon plug coupling, it has a 120 ohm
resistances between the 2 feet and 3 feet, it will connected on the last led
moving head lamp’s digital plug of the led moving head lamp chain.
1
XII. DMX function
Channel
Value Function
18CH
16CH
1 1 0-255
Pan movement
2 * 0-255
Pan fine
3 2 0-255
Tilt movement
4 * 0-255
Tilt fine
5 3 0-255
Pan and Tilt move speed
6 4 0-255 Main dimming
7 5 0-255 Strobe from slowly to fast
8 6 0-255 Red dimming
9 7 0-255 Green dimming
10 8 0-255 Blue dimming
11 9 0-255 White dimming
12 10 0-255 Amber dimming
13 11 0-255 Purple dimming
14 12
0-15 No function
16-44 Motor auto running 3
45-74 Motor auto running 2
75-104 Motor auto running 1
105-128 Motor auto running 0
129-157 Motor sound running 3
158-187 Motor sound running 2
188-217 Motor sound running 1
218-255 Motor sound running 0
6

Press ENTER button to save your changes or to ENTER submenu, Press UP
or DOWN can change value(Plus or reduce number).
Note: Please press “Menu”button to choose function , and press
“Enter”button to confirm.
No. Display
Function Function Description
1
Addr
001-512
DMX address setting
2 CHnd
16CH
16 channel setting
18CH
18 channel setting
3 SLnd
Master
Master model
SL 1
Slave model 1
SL 2 Slave model 2
4 SHnd
SH 0 Show Mode 0（Including 1,2,3）
SH 1 Show Mode 1
SH 2 Show Mode 2
SH 3 Show Mode 3
5 SEnS 0-100 Sound sensitivity adjust
6 bLnd
bLAc
No DMX512 signal, keep on start state
Auto
No DMX512 signal, light running by auto
Soun
No DMX512 signal, light running by sound
HoLd No DMX512 signal, light keep on last
control status (only for 15CH mode)
7 Led
OFF
LED display turn off after 5 seconds
ON
LED display turn on all the time
8 dISP
NO
LED display forward
YES LED display reverses
9 rPan NO X Motor forward
YES X Motor reverses
10 rTIL NO Y Motor forward
YES Y Motor reverses
11 REST YES Light rest
5
IV. Maintaining
1. The fixture should be kept dry to avoid working in wet
conditions.
2. Intermittent use will effectively prolong the life of this fixture.
3. For a good ventilation and lighting effects, please clean the
fans ,fan nets and lens usually .
4. To avoid damage this fixture, please don't use alcoholic or
other organic solvents to clean the fixture shell.
V. Precautions
1. In order to ensure the life of this fixture, please don't place this fixture
where is moisture or leakage, and don't operate the fixture at
temperatures higher than 40°please!
2. Don't install the fixture where is easy to loose or vibration-prone
3. To avoid risk of electric shock, please ask the professionals to maintain
this fixture.
4. When connect the fixture to power, the changes of power voltage should
be at-10% ~+10%,if higher, will reduce the life of the fixture, but if lower,
will effect the lightness.
5. In order to ensure the normal use of this product, please read this
manual carefully.
VI. Warning
·Don’t disassemble and assemble the LED moving head.
·Please Do not put the led moving head lamp in water or other any types
liquids and the metal (IP20).
·Do not install the led moving head lamp in the humidity environment.
·Should maintain the minimum 0.5 meter distance between the led moving
head lamp and other neighboring object surface.
2

VII. Difficult processing
Question Answer
The LED moving head lamp can
not start.
Inspects the fuse on the rear panel.
Although shines, but the LED
moving head lamp can not accept
the instruction of the controller.
Check the digital start address and also
check the connection
situation of the
communication control line the.
LED moving head lamp only can
work intermittently.
Inspect the power supply and voltage is
whether normal.
Do not receive the DMX512 signal
Whether the signal lines do contact
good or broken.
The light beam appears gloomily. Inspect the optics part is whether clean.
Note: Other maintain work should by the specialist which has
the experience to carry on.
VIII. Declaration
Before delivery, this fixture have the performance intact, packaging integrity,
and all users should strictly observe the above warnings and operating
instructions for the matter, with any damage caused by misuse is not
guaranteed within the company, for damages caused by ignoring the manual
instruction is not within the scope of the distributors or dealers. Thank you for
your cooperation!!
IX. Equipment and appendix
1. Led moving head light ----------------------------------1pcs
2. The Product of Instruction------------------------------1pcs
3. Power Cable ----------------------------------------------1pcs
3
4. XLR connector--------------------------------------------1unit
5. Bracket------------------------------------------------------1pcs
6. M6 mm Screw----------------------------------------------2pcs
X. Technical parameters
Voltage: AC100-240V,50Hz/60Hz
Power Consumption: 90 Watts
LED: 6IN1*4LED
LED Power: 18W (x 4pcs)
LED Current: 500mA / 1 pc
LED Beam Angle: 25°
Pan:540°
Titl:180°
Operation Modes: DMX512, Manual, Sound, Internal Program, Master/Slave
DMX Control: 16/18 Channels
Control Panel: Digital 4 Character Alphanumeric
Maximum Ambient Temperature: 40° C
Gross Weight: 2.8 kg
Package Size: 23 x 16 x 19.5cm
XI. Menu display function
Use button switch and LED display, can set the address code and function
code easily.
Check or modify lighting function settings, Press the MENU button. LED display panel
will display function menu of lighting. Function operation menu all have corresponding
submenu. Each menu all represent the specific functions of lamps, specific see below
"operation menu" section. 4