MJ LED LIGHTNING MJ-2400-2IN1 User manual

LED BLINDER 400
BLINDER 400
MJ-2400-2IN1
User Manual
======PROFESSIONAL LED LIGHTING ========
Thank you for choosing our mini LED blinder light. For the sake of your safety,
Please read and follow these instructions carefully and keep this manual in a safe
place for future reference.

SAFETY INSTRUCTIONS
This device has left the factory in perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this user manual.
When unpacking and before disposing of the carton, check there is no transportation damage before
using the product. Should there be any damage caused by transportation, consult your dealer and do
not use the apparatus.
The device can be use indoors and outdoors, IP65.
The device is not designed or intended to be mounted directly on to inflammable surfaces
The device is only intended for installation, operation and maintenance by professional person.
Do not device the beam onto inflammable surfaces, minimum distance is 5m.
Avoid direct exposure to the light from the lamp. The light is harmful to the eye.
Do not attempt to dismantle or modify the projector in any way.
Electrical connection must only be carried out by qualified personnel.
Before installation, ensure that the voltage and frequency of power supply match the power
requirements of the projector.
It is essential that each device is correctly earthed and that electrical installation conforms to all
relevant standards.
Do not connect this device to any other types of dimmer apparatus.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the
power-cord come into contact with other cables. Only handle the power-cord by the plug. Never pull
out the plug by tugging the power-cord.
LED lens shall be changed if they have become visibly damaged to such an extent that their
effectiveness is impaired, for example by cracks or deep scratches.
Exterior surface temperatures of the luminaire after 5 minutes operation is 60°C，when steady state
is achieved 65°C.
There is no user serviceable parts inside the projector, do not open the housing and never operate the
device with the covers removed.
If you have any questions, don’t hesitate to consult your dealer or manufacturer.
Always disconnect from the mains, when the device is not in use or before
cleaning it or before attempting any maintenance work !

BLINDER 400 2IN1
1
Introduction: .
Thank you for having chosen our LED lighting
Unpack the device ,inside the box you should find:
1) Light ----------------------------------------------1pcs
2)Power Cable-------------------------------------1pcs
3) User Manual------------------------------------1pcs
Description:
Features
. 12,8,6,4or 2 DMX channels selectable for numerous applications
. DMX-controlled operation, Sound-controlled operation or stand alone operation with
Master/Slave-function
. Automatic identify Master signal
. Stepless White colour changing
.Equipped with 4x 100W white LEDs
. Switch-mode power supply, 110V-240V
.Operation very easy，human design，dimming no flicker、jitter phenomena. Can be adapted
to video, photography, television and other demanding lighting occasions.
DMX-512 control connection：
The product has a DMX 512 input fitted with 3-pin XLR connectors. Screened cables in
compliance with EIA RS-485 specifications and the following characteristics must be used
for connections:
- 2 conductors plus screen
- 120Ohm impedance
- max. transmission rate 250kBaud.
DMX-512 connection with DMX terminator：
For installations where the DMX cable has to run a long distance or is in an electrically noisy
environment, such as in a discotheque, it is recommended to use a DMX terminator. This
helps in preventing corruption of the digital control signal by electrical noise. The DMX
terminator is simply an XLR plug with a 120 OHM resistor connected between pins 2 and
3,which is then plugged into the output XLR socket of the last fixture in the chain.
Graphic Part：

BLINDER 400 2IN1
2
Operation description：Press “A” will cycle out 11pcs different functional effect, LED Top
row in represent the current function（Reference function table）。 LED Top row on behalf of
the function in the address code、or speed and other parameters。Press Bor Ckey can
modify the parameter value。Press Dto confirm。
Display Menu:（All the functions are selected, press D to confirm.）
No.
Display
Function
1
A001
DMX address (001—512) Press “UP” and “Down”
button change the DMX address
2
6CH/12CH/
8CH/4CH/2CH
Channel choose (6CH/12CH/8CH/4CH/2CH) Press
“UP” and “Down” button change the DMX Channel
3
CC00
Color change by Snapping (CC01—CC12), press “UP”
and “Down” button change the snapping mode
4
LL99
Snapping mode speed (LL00—LL99), press “UP” and
“Down” button change the speed
5
CP99
CP01—CP99 (Color change by Fade), press “UP” and
“Down” button change the Fade speed
6
DE99
DE01—DE99 (Color change by Pulse), press “UP” and
“Down” button change the Pulse speed
7
BEBE
Sound mode
8
O255
O000—O255 (Warm white dimming by hand)
9
Y255
Y000—Y255 (White dimming by hand)
10
n000
n001—n255 (strobe speed)
press “UP” and “Down” button change the speed
11
-ON-/-OFF
LED display On/Off
Cleaning and Maintenance
We recommend a frequent cleaning of the device. Please use a soft
lint-free and moistened cloth. Never use alcohol or solvents!
CAUTION!
Disconnect from mains before starting maintenance operation.
There are no serviceable parts inside the device. Maintenance and service operations are
only to be carried out by authorized dealers.
If you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by
authorized dealers only in order to avoid hazards.
If you have further questions, please contact your dealer.

BLINDER 400 2IN1
3
DMX functions and values:
12CH mode
Channel
Value
Function
CH1
0-255
Main dimming from dark to bright
CH2
0-255
Control strobe from slowly to quickly
CH3
0-255
0—5: No function
6—20: Snap Running 1
21—35: Snap Running 2
36—50: Snap Running 3
51—65: Snap Running 4
66—80: Snap Running 5
81—95: Snap Running 6
96—105: Snap Running 7
106—110: Snap Running 8
111—125: Snap Running 9
126—140: Snap Running 10
141—155: Snap Running 11
156—170: Snap Running 12
170—185: Fade Running 1
186—200: Fade Running 2
201—215: Fade Running 3
216—230: Pulse Running
231—255：Sound Running
CH4
0-255
The speed of function from slowly to quickly
CH5
0-255
WW1 dimming from dark to bright
CH6
0-255
CW1 dimming from dark to bright
CH7
0-255
WW2 dimming from dark to bright
CH8
0-255
CW2 dimming from dark to bright
CH9
0-255
WW3 dimming from dark to bright
CH10
0-255
CW3 dimming from dark to bright
CH11
0-255
WW4 dimming from dark to bright
CH12
0-255
CW4 dimming from dark to bright
2CH mode
Channel
Value
Function
CH1
0-255
WW dimming from dark to bright
CH2
0-255
CW dimming from dark to bright

BLINDER 400 2IN1
4
8CH mode
Channel
Value
Function
CH1
0-255
WW1 dimming from dark to bright
CH2
0-255
CW1 dimming from dark to bright
CH3
0-255
WW2 dimming from dark to bright
CH4
0-255
CW2 dimming from dark to bright
CH5
0-255
WW3 dimming from dark to bright
CH6
0-255
CW3 dimming from dark to bright
CH7
0-255
WW4 dimming from dark to bright
CH8
0-255
CW4 dimming from dark to bright
6CH mode
Channel
Value
Function
CH1
0-255
Main dimming from dark to bright
CH2
0-255
Control strobe from slowly to quickly
CH3
0-255
0—5: No function
6—20: Snap Running 1
21—35: Snap Running 2
36—50: Snap Running 3
51—65: Snap Running 4
66—80: Snap Running 5
81—95: Snap Running 6
96—105: Snap Running 7
106—110: Snap Running 8
111—125: Snap Running 9
126—140: Snap Running 10
141—155: Snap Running 11
156—170: Snap Running 12
170—185: Fade Running 1
186—200: Fade Running 2
201—215: Fade Running 3
216—230: Pulse Running
231—255：Sound Running
CH4
0-255
The speed of function from slowly to quickly
CH5
0-255
WW dimming from dark to bright
CH6
0-255
CW dimming from dark to bright

BLINDER 400 2IN1
5
4CH mode
Channel
Value
Function
CH1
0-255
Main dimming from dark to bright
CH2
0-255
WW dimming from dark to bright
CH3
0-255
CW dimming from dark to bright
CH4
0-255
Control strobe from slowly to quickly
Technical Parameters:
Voltage: AC100-240V, 50Hz/60Hz
Power Consumption: 400W
LED: 4pcs 100W 2in1 COB white LED
LED Beam Angle: 60°
LED Lifetime: 80,000-100,000 hours
Color: Warm white and Cool white color mixing
Dimming: 0-100% smooth dimmer
Strobe: 10 Flashes per second (any color)
Operation Modes: DMX512, Manual, Sound, Internal Program
DMX Control: 2/4/6/8/12 Channels
Waterproof grade: IP 65
Control Panel: Digital 4 CharacterAlphanumeric
Maximum Ambient Temperature: 40°C
Gross Weight: 13.8 kg
Package Size: 480 x 450 x 300cm
WARNING
Please do NOT use the light under the water!
Please do NOT connect the power cable hand by hand over 4pcs
Important notice:
Before open the LED blinder light and if you want to do the repair work, please make
sure the power source is at the separation condition.
Unceasingly carries on the product improvement about our company the policy, in this
instruction booklet carries the data will have the possibility to be able to change in the
future, when no longer separate notice change matters concerned. Our company
retains when the product improvement changes the related specification the authority.
This instruction booklet publisher cannot be responsible regarding this instruction
booklet in information accuracy, also cannot the related consequence which causes
regarding these information be responsible.