Mocka Asha Console Table User manual

Asha Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
bolt
x20
A B C D EFGH
J K L M N
IO P
Hardware Supplied
dowel
x14
screw
x20
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
locking
nut x20
screw
x10
screw
x4
x4
wedge small
bolt
x8
handle
x2
plastic
glide
x4
small
locking nut
x8
bolt
x4
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required

Asha Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 8x bolts (C) into panel [1] and tighten with a screwdriver. Insert 8x bolts (C) into legs [4], [5], [6] and [7] and tighten with a
screwdriver.
.
C
C
C
C
C
C
C
C
C
C
C
C
C
C
1
6
7
5
4
C
C

Asha Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach legs [4] and [5] to panel [2] and attach legs [6] and
[7] to panel [3] and secure with 8x locking nuts (D). Tighten
with a screwdriver.
Attach 1x slide rail (F) and 1x slide rail (G) to panels [2] and [3]
as shown and secure with 6x screws (E). Tighten with a screwdriver.
Insert 4x bolts (C) into panels [2] and [3]. Tighten with a screwdriver.
D
D
D
D
D
D
D
D
E
E
EF
C
C
C
C
G
CR
E
F
CL
E
G
E
E
E
DD
2
2
3
3
7
6
4
5

Asha Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach 1x slide rail (G) to panel [11] as shown and secure
with 3x screws (E). Flip the panel [11], attach 1x slide rail (F)
to panel [11] as shown and secure with 3x screws (E). Tighten
with a screwdriver.
Attach panel [9] and [10] to panel [2] with 2x dowels (A) and secure
with 2x locking nuts (D). Tighten with a screwdriver.
E
E
E
F
E
E
EG
FLIP
G
CR
E
F
CL
E
11
11
9
10
2
A
A
D
D

Asha Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panel [11] to panel [9] and [10] and secure with 2x screws (B).
Tighten with a screwdriver.
Attach panel [9] and [10] to panel [3] with 2x dowels (A) and
secure with 2x locking nuts (D). Tighten with a screwdriver.
Attach 4x plastic glides (L) to the legs using a hammer as shown.
9
10
B
B
11
9
10
2
2
3
A
D
A
D
L
L
L
L
L

Asha Console Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Slide panel [12] down along the grooves between the panels [2]
and [3] to form the back of the unit as shown.
Attach panel [1] to the rest of the unit with 10x dowels (A) and
secure with 8x locking nuts (D). Tighten with a screwdriver.
12 1
A
DA
AA
D
D
A
A
D
D
A
D
2
3
2
3
11

Insert 4x small bolts (M) into panels [13] / [14]. Attach panels [15] and
[16] to panels [13] / [14] and secure with 4x small locking nuts (N).
Tighten with a screwdriver. Slide panels [17] along the grooves
between the panels [15] and [16] to form the base of the drawer.
Asha Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211Drawers x2
Attach panels [15], [16] and [18] as shown using 4x screws (B).
Tighten with a screwdriver. Attach slide rail (I) and slide rail (H)
to the underside of the side panels as shown. Secure with 4x
screws (E) and tighten with a screwdriver. Attach handle (O) to
panel [13] / [14] and secure with 2x bolts (P) and tighten with a
screwdriver.
M
M
MM
N
N
B
B
BB
E
EH
E
I
E
PP
O
13
15
16
14
13
14
15
16
17
13
14
13
14
13
14
13
14
15
16
18
16
15

Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
Attach 4x wedges (J) into the corners of the back of the unit
and secure with 4x screws (K). Tighten with a screwdriver.
Attach 1x safety strap (V) to the top of the back side of the
unit as shown using 1x washer (Z) and 1x screw (W). Tighten
with a screwdriver.
Asha Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
1413
V
Z
W
V
ZW
J
K
J
K
13
14
12
1

You’re done, enjoy!
Asha Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
1615
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before use.
X
Y
Z
wall
anchor
screw
strap
washer