Mocka Elias Change Table User manual

Elias Change Table
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
E F
AC D
Hardware Supplied
Wall Strap
20x
bolt
1x
allen key
16x
bolt
1x
screw
1x
wall screw
G
2x
washer
H
1x
wall anchor
I
1x
wall strap
B
dowel
x8

12
Elias Change Table
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 4 x panels [8] to panel [4] and secure with 8 x bolts (B). Tighten
with an allen key (D).
Attach 2 x panels [7] to assembled frame as shown. Tighten with an
allen key (D).
C
D
D
Cx2
Cx2
Cx2
Cx2
4
8
8
8
8
C
C
C
C
7
7
C

C
3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [2], [3] and [5] to panel [1] as shown and secure with 6 x
bolts (A) and 4 x bolts (C). Tighten with an allen key (D).
Slide panels [6] into position as shown.
Elias Change Table
4
A
A
A
A
AC
C
C
A
5
5
Bx2
Bx2
2
1
3
6
6
D

5
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [1] to assembled frame as shown and secure with 6 x
bolts (C) and 4 x dowels (B). Tighten with an allen key (D).
Rotate unit as shown and attach 4 x bolts (C) to panels [5]. Tighten with
an allen key (D).
Elias Change Table
6
D
C
C
C
C
C
C
C
C
Bx2
Bx2
C
C
C
C
1
C
5
5
C
D

7
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Once assembled lift furniture into place, do not drag.
Attach wall strap (J) to panel [3] with 1x washer (G) and 1x screw (E).
Use a drill to create a small hole lining up with the safety strap (J).
Fasten to wall using 1x wall anchor (H), 1x washer (G) and 1x wall
screw (F).
Ensure unit is balanced and steady before use. You’re done, enjoy!
Elias Change Table
EF
GH
J
G
3