Mocka Porto Full Length Hanger User manual

Porto Full Length Hanger
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Wall Strap
Hardware Supplied
screw 25mm
x4
B
screw 30mm
x2
C
screw 40mm
x2
G
screw 50mm
x23
D
screw 25mm
x2
E F
wall plug
x2
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
H
feet
x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the
furniture or in the event of an earthquake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from those
supplied.
wall strap
x2

Porto Full Length Hanger
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 4 x feet (H) into steel frame [7] and [8] as shown. Attach panels [4] and [2] together and secure with 3 x screws (G).
Tighten with a screwdriver.
2
G
G
4
G
12
H
7 8
H
H
H

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach steel frame [7] and [8] to panels [4], [6] and [1] and secure
with 10 x screws (G) and 2 x screws (B). Attach wall strap (E) to steel
frame [7] and [8]. Tighten with a screwdriver.
Attach panel [5] to panel [2] and secure with 2 x screws (G). Tighten
with a screwdriver.
Porto Full Length Hanger
4
GG
5
2
1
4
6
G
B
G
G
B
E E
78
G

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach assembled frames together as shown and secure with 5 x
screws (G). Tighten with a screwdriver. Attach frames together as shown and secure with 2 x screws (A) and 1
x screw (G). Tighten with a screwdriver.
Porto Full Length Hanger
6
25
G1
2G
AA

7
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [3] to assembled frame and secure with 2 x screws (C).
Tighten with a screwdriver. Attach rail to assembled frame as shown and secure with 2 x screws (A). Tighten with a screwdriver.
Porto Full Length Hanger
8
G3
GC
AA

9
6
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Once assembled lift furniture into place, do not drag. Use a drill
to create a small hole lining up with the top of the 2 x safety strap (E).
Fasten to the wall using 2 x wall anchors (F) and 2 x screws (D). En
sure unit is balanced and steady before use.
You’re done, enjoy!
Porto Full Length Hanger
10
E
D
F