Mocka Soren King Single Bed User manual

Soren King Single Bed
Assembly Instructions
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hardware Supplied
Phillips & hammer required.
screw
x42
washer
x21
large
Allen Key
x1
long bolt
x2
bolt
x27
hexagonal
nuts x2
small
Allen Key
x1
elbow
connector
x4
flat
connector
x4
bolt
x12
A B C D
F G HJ
screw
x20
I
K L M
plastic
glide x4
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
adjuster
x3
E

Soren King Single Bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1
Attach 2x panels [4] to panels [1], [2] and [3] secure with 16x bolts (L)
and 16x washers (F). Tighten with a small Allen Key (B).
2
2
2
3
1
5
7
8
6
6
4
4
4
L
F
B
L
F
x11
9
10
11
11
11
x2
x2
x2
L
F
3
1
2
2
2
Panel layout

Soren King Single Bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
2 3
Attach 2x flat connector (I) to panel [7] and secure with 8x screws (A).
Tighten with a screwdriver. Attach 2x panels [5] to panel [7] and secure
with 8x bolts (L). Tighten with a small Allen Key (B). Attach 2x plastic
glides (K) to panels [5] using a hammer.
Turn over the connected panels, attach 2x flat connector (I) to panel [3]
and secure with 8x screws (A). Tighten with a screwdriver. Attach 2x
plastic glides (K) to panel [3] using a hammer.
3
7
5
5
7
A
A
I
I
A
I
A
I
A
I
L
L
B
K
K
K
K

Soren King Single Bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54X2
Attach 2x elbow connector (H) to panel [6] and secure with 8x
screws (D). Tighten with a screwdriver.
Attach panels [6] to panel [7] and secure with 6x bolts (G). Tighten with
a large Allen Key (J).
6
6
6
7
D
G
G
H
I
I
J
D
H
H
I
H
D
H

Soren King Single Bed
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6 7
Attach panels [6] to panel [3] and secure with 6x bolts (G). Tighten
with a large Allen Key (J).
3
6
6
GL
L
L
F
F
F
E
E
E
B
G
H
H
I
I
J
10
11
11
11
Attach 3x panels [11] to panel [10] with 3x bolts (L) and 3x washers (F).
Tighten with a small Allen Key (B). Insert the 3x adjusters (E) into the
bottom of panels [11] as shown.

Soren King Single Bed
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
8
Assembly Instructions
E
DD
D
D
D
D
3
10
7
Attach panel [10] to panels [3] and [7] and secure with 4x screws (D).
Tighten with a screwdriver. Once assembled lift the bed into place,
do not drag. Once in the correct position, rotate the adjusters (E) to
the floor level. Ensure the unit is balanced and steady before use.
Attach panels [9] to panel [10] secure with 2x long bolts (C) and 2x
washers (F) and 2x hexagonal nuts (M) . Tighten with a small Allen
Key (B). Attach panels [9] to panels [6] secure with 4x screws (A).
Tighten with a screwdriver.
9
6
6
A
C
C
M
M
F
F
A
A
A
10
C
B
M
F
9
9

Soren King Single Bed
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
10
Assembly Instructions
Once assembled lift furniture into place, do not drag. You’re done, enjoy!
11
Attach 11x panels [8] to panels [6] and secure with 22 x screws (A).
Tighten with a screwdriver.
6
6
A
8