Mocka Aspen Cot User manual

Flathead screwdriver required
Hardware Supplied
WARNING: TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
A
8x
bolt
B
16x
bolt
C
8x
bolt
D
8x
nut
E
8x
dowel
F
1x
allen key
Ensure the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
Keep all medications, string, elastic, small toys or small items, such as money, out of reach from
any position in the cot.
Assembly
Care must be taken when attaching sides. Do not over-tighten screws as this can cause damage
to the cot.
Care and Maintenance
Regularly check all screws for tightness or damage that could render the cot unsafe.
To clean - use a damp cloth, avoiding the use of detergents or abrasives.
Recommended mattress size
This cot has been manufactured for use with a mattress which measures 1300mm long x 690mm
wide x 100mm in thickness. The width and length are specified because it is important that gaps
between the mattress and the sides and ends of the cot will not exceed 40mm. This is to minimize
the risk of a child’s limb becoming caught in the gap. The thickness of the mattress has been
specified to ensure that the depth of the cot is greater than 500mm with the mattress base in the
lower position to minimize the risk of a child climbing or falling out of the cot.
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Aspen Cot
Assembly Instructions
Thank you for your purchase.
Please follow the manufacturers assembly instructions in detail
to ensure the safety features of the cot are not compromised.

12
Insert 8x dowel (E) into 2x panel [7].
Attach 2x panel [5] and 2x panel [6] to 2x panel [7] with 4x bolts (B).
Tighten all bolts with allen key (F).
Place 8x nut (D) inside panels [5] and [6].
Attach panels [5] and [6] to panel [4] with 8x bolts (C).
Use a flathead screwdriver to align nuts (D) with bolts (C).
Tighten all bolts with allen key (F).
B
B
B
B
E
E
E
E
E
E
E
E
C
C
C
C
C
F
D
D
D
F
B
6
6
6
6
5
5
5
5
7
7
4
Aspen Cot
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

12
Insert 8x dowel (E) into 2x panel [7].
Attach 2x panel [5] and 2x panel [6] to 2x panel [7] with 4x bolts (B).
Tighten all bolts with allen key (F).
Place 8x nut (D) inside panels [5] and [6].
Attach panels [5] and [6] to panel [4] with 8x bolts (C).
Use a flathead screwdriver to align nuts (D) with bolts (C).
Tighten all bolts with allen key (F).
B
B
B
B
E
E
E
E
E
E
E
E
C
C
C
C
C
F
D
D
D
F
B
6
6
6
6
5
5
5
5
7
7
4
34
Attach 2x panel [1] to panel [4] with 4x bolts (B).
Tighten all bolts with allen key (F).
Attach 1x panel [2] to panels [1] with 4x bolts (A).
Attach panel [2] to panel [4] with 2x bolts (B).
Tighten all bolts with allen key (F).
B
B
B
B
B
B
A
A
A
A
4
2
1
1
1
1
F
B
FB
A
Aspen Cot
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

56
Attach panel [3] to panels [1] with 4x bolts (B).
Tighten all bolts with allen key (F).
Attach 1x panel [2] to panels [1] with 4x bolts (A).
Attach panel [2] to panel [4] with 2x bolts (B).
Tighten all bolts with allen key (F).
FB
A
B
B
B
B
A
A
A
A
B
B
4
3
2
1
1
1
1
F
B
Aspen Cot
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

56
Attach panel [3] to panels [1] with 4x bolts (B).
Tighten all bolts with allen key (F).
Attach 1x panel [2] to panels [1] with 4x bolts (A).
Attach panel [2] to panel [4] with 2x bolts (B).
Tighten all bolts with allen key (F).
FB
A
B
B
B
B
A
A
A
A
B
B
4
3
2
1
1
1
1
F
B
78
All done! Regularly check all screws are suitably tightened. Place the
correct size mattress into the cot before use. To clean use a damp
cloth, avoiding the use of detergents or abrasives. Once assembled lift
furniture into place, do not drag.
OPTIONAL: To adjust mattress base setting, push the small plastic
plugs out from the alternative holes with a screwdriver and repeat steps
5 and 6 by removing the side panel and moving the base to
corresponding holes. Securely attach again in the adjusted position.
B
B
B
B
Aspen Cot
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions