Mocka Hudson Wooden Chair User manual

Hudson Wooden Chair
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Once fully assembled please ensure all legs are sitting flush
against the chair underside to ensure stability. Do not over-tighten
screws.
To ensure longevity of the wood please use a damp cloth only for
cleaning. Avoid use of household cleaners.
Hardware Supplied
AD
x1
Allen key
x 12
long screw
C
x 4
nut
B
x 4
small screw
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Hudson Wooden Chair
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach two front legs (without holes) to the underside of the round seat
piece using 3x long screws (A) in each leg. Tighten screws with the
Allen key (D) provided.
Attach the two back legs (with holes) to the underside of the round seat
piece using 3x long screws (A) in each leg. Fasten screws using Allen
key (D) ensuring pieces sit flush against the seat.
A
x2
Ax3 Ax3
A
x2
Ax3 Ax3

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach the backrest to the two back legs using 4x small screws (B) and
4x nuts (C) in the holes provided. Tighten screws with Allen key (D).
Regularly check all screws are secure but not overly tightened. You’re
done, enjoy!
Hudson Wooden Chair
4
C
x2
C
B
B
B
B
C
C
C
C