Mocka Jack Six Drawer User manual

1
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
WV
screw
x2
wall
screw
x2
Jack Six Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x18
wedge
x8
screw
x8
screw
x8
A B C D E F G
HJK L MI
Hardware Supplied
dowel
x22
screw
x72
slide
rail x6
slide
rail x6
slide
rail x6
slide
rail x6
locking
nut x18
cam bolt
x8
handle
x6
N
Allen key
x1
O P
small bolt
x30
small locking
nutx30
long
screw x10
QR S
screw
x36
long dowel
x2

Jack Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver. Attach 3x slide rails (F) to panel [3] and secure with 9x screws (E).
Attach 3x slide rails (G) to panel [4] and secure with 9x screws (E).
Insert 8x bolts (C) to the panels [3] and [4]. Tighten with a screwdriver.
C
C
C
C
C
C
C
C
C
C
1
3
4
E
E
E
E
G
G
G
F
F
F
E
E
E
E
E
E
E
EE
E
EE
E
E
F
CL
E
G
CR
E
CC
CC

Jack Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach 3x slide rails (F) to panel [5] as shown with 9x screws (E).
Flip the panel [5], attach 3x slide rails (G) to panel [5] as shown
with 9x screws (E). Tighten with a screwdriver. Insert 4x bolts (C)
to the panel [5]. Tighten with a screwdriver.
Attach panels [6] and [16] to panel [3] with 2x dowel (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
C
C
C
C
3
6
16
5
5
G
G
G
F
F
F
E
E
EE
E
EE
E
E
EE
E
EE
E
E
E
E
F
CL
E
G
CR
E
FLIP
6
A
D
D
A
D
D

Jack Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Attach panel [5] to panels [6] with 2x long dowel (S) and secure
with 2x locking nuts (D). Tighten with a screwdriver.
Attach panels [4] and [6] to panel [5] and [16] with 2x dowel (A)
and secure with 6x locking nuts (D). Tighten with a screwdriver.
Attach panel [16] to panel [5] as shown using 2x screws (B).
Tighten with a screwdriver.
6
4
6
6
6
16 5
5
S
D
SD
D
B
D
D
D
D
S
S
A
A
B

Jack Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Slide panel [7] down along the grooves between the panels [3] and [4]. Attach panel [1] to panels [3] and [4] with 6x dowels (A) and secure
with 6x locking nuts (D). Tighten with a screwdriver.
33
4
4
5
7
1
D
D
D
A
A
A
A
D

Jack Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Flip the unit and Slide panels [7] down along the grooves between
the panels [3] and [4] to form the back of the unit as shown.
Attach panel [2] to the rest of the unit using 6x dowels (A) and secure
with 6x screws (B) as shown. Tighten with a screwdriver.
B
B
A
B
A
B
B
B
A
A
3
3
7
2
5
4
4

Jack Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 12
Attach panels [8] to the panels [9] with 8x cam bolts (J) and tighten
with a Allen key (N).
Attach leg panels to the bottom panel [2] with 10x screws (Q), and tighten
with a screwdriver.
JN
J
J
J
2
Q
Q
Q
QQ
Q
Q
Q
Q
Q
JN
3
8
3
8
3
8
3
8
3
9
3
9
3
9
3
9

Jack Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 Drawers x6 14 Drawers x6
Insert 5x small bolt (O) into panels [10] and [11].
Tighten with a screwdriver.
Attach panels [12], [13] and [17] to panel [10]/[11] with 1x dowel (A) and
using 5x small locking nuts (P). Tighten with a screwdriver.
O
x3 x3/
O
O
O
O
P
P
P
P
P
3
10 3 11
x3 x3/
3
10
3
12 3
17
3
13
3
11
A

Jack Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 Drawers x6 16 Drawers x6
Attach panels [12], [13], [15] and [17] as shown using 6x screws (R).
Tighten with a screwdriver.
Slide panel [14] along the grooves between the side panels [12]
and [13] to form the base of the drawer.
R
R
R
R
3
12
3
12
3
14
3
15
3
13 3 13
x3 x3/
3
10 3 11
x3 x3/
3
10 3 11
RR

E
E
E
E
H
I
Jack Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 Drawers x6 18 Drawers x6
Attach handle (M) to panels [10] and [11] with 2x screws (E).Tighten
with a screwdriver.
Attach slide rails (I) and slide rails (H) to the underside of panels
[12] and [13] as shown. Secure with 4x screws (E) and tighten with
a screwdriver.
3
12
3
13
x3 x3/
3
10 3 11
x3 x3/
3
10 3 11
E
E
M