Mocka Dakota Dining Table User manual

A CB
long bolt
x20
bolt
x2
allen key
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
Hardware Supplied
Phillips screwdriver required
Dakota Dining Table
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

Dakota Dining Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
2
12
Attach 2x panels [2] to 2x panels [3] and secure with 4x long
bolts (A). Tighten with an Allen key (C).
Attach 2x panels [2] to panel [4] and secure with 2x long bolts (A).
Tighten with an Allen key (C).
A
C
2
2
3
3
A
2
2
4
C

Dakota Dining Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
3
3 4
Attach panels [2] and [3] to panel [1] and secure with
14x long bolts (A). Attach panel [4] to panel [1] and
secure with 2x bolts (B). Tighten with an Allen key (C).
Ensure unit is balanced and steady before use. You’re done, enjoy!
2
2
1
3
3
4
B
C
A
C