Mocka Addi Bedside Table User manual

Addi Bedside Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x6
x4
A B C D E F G HJ
KLMN
I
O
Hardware Supplied
P
dowel
x10
screw
x20
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
locking
nut x6
screw
x4 x4
bolt
x8
locking
nut x8
small small
QR
wedge
screw screw
x8
x4
nut
S
key x1
Allen plastic
glide x4
Phillips & Flathead screwdrivers
and hammer required
dowel
x4
big
long
Allen
bolt x 4

Addi Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 4x bolts (C) into panel [1] and tighten with a screwdriver. Attach 2x slide rail (F) and 2x slide rail (G) to panels [3] and [4]
as shown with 12x screws (E). Tighten with a screwdriver. Insert
2x bolts (C) into panels [3] and [4]. Tighten with a screwdriver. .
G
CR
E
F
CL
E
C
C
C
C
1
3
4
C
C
E
E
E
F
E
E
E
F
E
E
E
E
E
E
G
G

Addi Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panel [4] and panel [3] to panel [5] with 2x dowels (A) and
secure with 2x locking nuts (D). Tighten with a screwdriver.
Attach panel [4] and panel [3] to panel [1] with 4x dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
A
A
D
D
A
A
A
A
D
D
D
D
3
4
5
3
4
1

Addi Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Slide panel [6] down along the grooves between the panels [4]
and [3] to form the back of the unit as shown.
Attach legs [7] to panel [2] with 4x big dowels (S) and 4x nuts (L) and
secure with 4x Long Allen bolts (Q). Tighten with an Allen key (M).
×
SL
Q
SL
Q
Q
Q
L
S
S
L
Q
M
6
7
7
7
32
4

Addi Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8 Drawers x2
Attach panel [2] to the unit with 4x dowels (A) and secure with 4x
screws (B). Tighten with a screwdriver. Attach 4x plastic glides (N)
to the legs [7] using a hammer as shown.
Insert 4x small bolts (O) into panel [8] and [9]. Attach panels [10] and
[11] to panel [8] and [9] and secure with 4x small locking nuts (P).
Tighten with a screwdriver. Slide panel [12] along the grooves between
the panels [10] and [11] to form the base of the drawer.
A
B
A
B
A
B
N
N
N
N
N
OO
OO
P
P
2
3
4
8
9
8
9
10
11
8
9
12
10
11

Addi Bedside Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach panels [10], [11] and [13] as shown using 4x screws (R). Tighten
with a screwdriver. Attach slide rail (I) and slide rail (H) to the underside
of the side panels as shown. Secure with 4x screws (E) and tighten with
a screwdriver.
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
R
R
E
E
E
E
H
I
11
8
9
10
13
10
11

Addi Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Attach 4x wedges (J) into the corners of the back of the unit and secure
with 4x screws (K). Tighten with a screwdriver. Attach 1x safety straps (V)
to the top of the back side of the unit as shown using 1x washers (Z) and
1x screws (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before
use. You're done, enjoy!
X
Y
Z
1
wall
anchor
screw
strap
washer
K
J
V
Z
W
V
Z
W
6
1
J
K