Mocka Jersey Change Table User manual

A B C D
EF
Phillips & Flathead screwdrivers and hammer
Hardware Supplied
dowel
x20
bolt
x28
locking
nut x28
small
screw x8
long
screw x12
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
x4
long screw
1
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
L + R
slide rail
x4
mocka.co.nz | mocka.com.au
2
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100%
before first use.
Jersey Change Table
G H
12 mm
small
screw x22

2
12
Jersey Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
Insert 4 x bolt (A) into panel [1] and [2]. Tighten with a screwdriver. Insert 4 x locking nut (B) into panels [3] . Tighten with a screwdriver.
B
2
A
A
A
A
1
B
B
B
B
2
1
3

3
34
Jersey Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
4
A
A
A
A
A
A
A
A
E
E
EE
EE
EE
AA
A
A
5
G
GG
G
DDD
D
7
6
Attach 2 x left slide rail (G) to panel [4] and secure with 4 x small screw (E).
Tighten with a screwdriver.
Attach 2 x right slide rail (G) to panel [5] and secure with 4 x small screw (E).
Insert 12 x bolt (A) into panel [4] and [5].
Tighten with a screwdriver.
Attach panels [6] to panel [7] and secure with 4 x long screws(D).
E
G

4
56
Jersey Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Insert 10 x dowel (C) into panel [5] . Attach panel [3] and [7] and
[8] and secure with 6 x locking nuts (B).
Tighten with a screwdriver.
53
7
8
8
3
7
8
8
4
5
Insert 10 x dowel (C) into panel [4] . Attach panel [3] and [7] and
[8] and secure with 6 x locking nuts (B).
Tighten with a screwdriver.
B
B
B
B
B
B
C
C
C
C
C
C
C
C
B
B
B
BB
B
C
CCC
C
C
C

5
78
Jersey Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Drawer x 2
9
12
13
Drawer x 2
A
A
B
B
Insert 12 x bolts (A) into panel [9] . Slide panels [16] between the grooves on
panels [12] and [13] to form thebase of the drawer as shown. Attach panel [15]
to panel [9] and secure with 12 x locking nut (B).
Tighten with a screwdriver.
16
15
15 12
13
16
14
F
F
F
F
FF
Tighten with a screwdriver.
Attach panel [14] to panels [9] and [12] and [13] secure with 12 x medium
screws(F).
15
15
13
B
B
AA
AA
B
B
12
9

6
9
Jersey Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Tighten with a screwdriver.
Now both drawers are made up, slide them into rails in the change
table unit.
9
12
3
1
12
2
14
9
9
12
4
L
L
L
L

7
10
Jersey Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Attach the safety strap (W) to the top of the back side of the unit using
screw (Y). Tighten with a screwdriver.
YY
W
W
x1
11
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
HH
H
10
11
On the back side of the set, fit boards [10] and [11] into the grooves. Use
small screws (H) all around to fasten boards to the change table unit.

8
12
Jersey Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (W). Fasten to wall
using wall anchor (X), washer (Z) and screw. Ensure the unit is balaced
and steady before use. You’re done, enjoy!
X
Z
x1
wall
screw
wall
anchor
wall
screw
Washer
Strap