Mocka Zander Round Coffee Table User manual

Zander Round Coffee Table
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
long screw
x8
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
B
short screw
x4
C
foot pads
x4
dowel
x4
D

12
Zander Round Coffee Table
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [2] and [3] to panel [1] and secure with 4 x screws (B).
Tighten with a screwdriver.
Attach 4 x legs [4] to assembled frame and secure with 4 x screws (A)
and 4 x dowel (D). Tighten with a screwdriver.
B
B
B
B
A
A
A
A
3
4
4
4
4
2
1
D

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [5] and [6] to assembled frame and secure with 4 x
screws (A), attach 4 x footpads (C) as shown, Tighten with a
screwdriver.
Lift the table into place, do not drag. You’re done, enjoy!
Zander Round Coffee Table
4
A
C
5
6