Mocka Sonata User manual

A B C D
Hardware Supplied
medium
bolt x4
plug
x24
small
bolt x19
allen
key x2
WARNING: Falls from elevated beds can be fatal and deaths have occurred
where children have fallen from elevated beds. This is relevant for all ages.
The risk is greater for younger children.
The risk of injury or death from a fall from an elevated bed compared to a
non-elevated bed is:
10x greater for 7-8 year olds
7x greater for 9-10 year olds
3x greater for 11-12 year olds
IMPORTANT STATEMENT
1. Children should be discouraged from playing on the bunk bed.
2. The bunk bed should be checked periodically to ensure that the guardrail,
access device and other components are maintained in the correct position
and state of repair and that all connectors are tight.
WARNING: TOP BUNKS AND ELEVATED BEDS ARE DANGEROUS AND
ARE NOT RECOMMENDED FOR CHILDREN UNDER THE AGE OF 9
WARNING: THE UPPER BUNK MUST BE MORE
THAN 2 METRES FROM ANY CEILING FAN
E F
nut
x2
large
bolt x2
LIFT THE BED INTO PLACE, DO NOT DRAG, AS THIS CAN CAUSE DAMAGE
Sonata Bunk Bed
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach panels [3] to panel [1] and [4] using 8x small bolts (A) and
tighten with the allen key (D).
Attach panels [2] and [6] to panel [1] and [4] using 11x small bolts (A) and
tighten with the allen key (D).
A
4
3
1
3
A
A
A
A
A
A
A
3
1
A
D
A
D
6
2
4
1
3
A
A
A
A
A
A
A
A
A
A
A
A
D
2
1
Sonata Bunk Bed
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach panels [3] to panel [1] and [4] using 8x small bolts (A) and
tighten with the allen key (D).
Attach panels [2] and [6] to panel [1] and [4] using 11x small bolts (A) and
tighten with the allen key (D).
A
4
3
1
3
A
A
A
A
A
A
A
3
1
A
D
A
D
6
2
4
1
3
A
A
A
A
A
A
A
A
A
A
A
A
D
2
1
34
Attach slats [5] to the bottom panels [3]. Do this by sliding the bracket
on the slat behind the bracket on both panels [3], then secure into place
with 12x plugs (C) on each panel [3].
Now attach slats [5] to the top panels [2] and [6]. Do this by sliding the
bracket on the slat behind the bracket on both panels [2] and [6], then
secure into place with 12x plugs (C) on each panel.
3
2
5
C
C
C
C
C
C
C
C
C
C
C
C
C
5
3
C
C
C
C
C
C
C
C
C
C
C
C
5
2
6
C
5
2
position
below
Sonata Bunk Bed
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach the ladder [7] to panel [6] using 2x large bolts (F) and secure
with 2x nuts (E) as shown. Tighten with the allen key (D).
Attach the handles [8] to panels [6] and [1] as shown using 4x medium
bolts (B) and tighten with the allen key (D). Once assembled lift bunk bed
into place, do not drag. You’re done, enjoy!
8
7
1
6
67
6
B
D
B
D
18
8
E
F
E
F
F
E
Sonata Bunk Bed
Assembly Instructions
4
mocka.co.nz | mocka.com.au